Moved OpenThread-related Kconfigs from L2 layer to
modules/openthread. All of those configs were not strictly related
to the L2 layer, so they fits better to OpenThread module.
This operation allows using OpenThread Kconfigs even if L2 layer is
disabled.
Enabling NET_L2_OPENTHREAD also configures those configs by
selecting the OPENTHREAD kconfig, so there is no change regarding
backwards compatibility. The only change is that the Kconfigs
related to Thread were moved to the modules space, so their
location in the menuconfig also changed.
Once it is done, a choice for setting different L2 implementations
seems to be redundant.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Introduce NXP NCNano driver using MIPI DBI class. This peripheral
supports 8080 and 6800 mode. The driver also supports used with
nxp,mipi_dsi_2l driver, for the panel with DPHY bus, such as g1120b0mipi.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
- The fsl_common_dsp driver needs to be loaded
when building xtensa projects and the fsl_common_arm
driver needs to be loaded when building arm projects.
- Add a condition to load power driver, because the power
driver is needed to build RT700 arm core project, but it
is not needed to build hifi core project.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Memory allocations in HAL are using data pool. These operations
are in control plane. Add APIs for allocation/free operations on
control pool.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Make the IOVDD settling delay configurable, instead of hardcoding a
delay that happens to work for the dev kits. For example, the nPM1300
load switches have a soft-start time of 1.8 ms.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This adds the nrf54l15dk/nrf54l10/cpuapp/ns board variant to
Zephyr. It allows to build applications for this target.
This is an initial support for the non secure target which allows
building and running tfm_ipc and config_build.
This is NOT full support of the non secure target in upstream
Zephyr.
There are important limitations, such as:
- The hardware Crypto accelerator is not supported and thus the non
secur target is NOT secure for production applications in upstream
Zephyr.
- The BL2 is not supported, so no DFU is supported with this support
Most of the code changes here are taken from nRF Connect SDK
in order to avoid having noups there.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Update the header to include a generic header for the NRF54L
series and not a specific one for the NRF54L15.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
- In middleware/CMakeLists.txt, using add_subdirectory()
to load the cmakelists.txt under bt_controller will
result in the bt_controller directory not being found
correctly, because the starting point of the query
is mcux-sdk-ng/CMakeLists.txt. Need to add
${CMAKE_CURRENT_LIST_DIR} to bt_controller to correctly
locate the folder.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Verify return values for otPlatRadio* functions and log the error
accordingly. For otPlatRadioTransmit() case, just log the error
and let the entire TX procedure proceed on the next timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/
are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using
cmake function `add_subdirectory`.
One issue is, when variables defined in one CMakeLists.txt are needed
by another CMakeLists.txt, then the variables need be exposed to parent
scope. This is not convenient.
Another issue is, to expose variables, the function `set_variable_ifdef`
sets the variables as global variables. The CMake global variables
named `CONFIG_xxx` will be collected by Kconfig, and results in build
fail.
The solution is:
1. Replace `add_subdirectory` with `include`, so that the variables will
be in the same file scope, don't need to expose them.
2. Modify the implementation of `set_variable_ifdef`, don't set
variables as global variables.
Resolves#88135
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Created new files and relocate hostapd support code in glue layer to new
files. The new files will be compiled only if hostapd support is enabled.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Fixes an issue where pinctrl psel properties encoded with
NRF_PSEL_DISCONNECTED() caused a build failure.
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
MCUboot has a configuration for single application slot RAM loading, in
which the single loader (or a hook thereof) can load an application from
an arbitrary flash location to RAM. Applications that are to be loaded
in this way need to specify, in their mcuboot header, the load address
in RAM they are meant to be loaded.
This patch adds a new Kconfig for this mode. The load address used comes
from devicetree chosen property "mcuboot,ram-load-dev", if it exists,
and if not, "zephyr,sram".
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This adds the nrf54l15dk/nrf54l15/cpuapp/ns board variant to
Zephyr. It allows to build applications for this target.
This is an initial support for the non secure target which allows
building and running tfm_ipc and config_build.
This is NOT full support of the non secure target in upstream
Zephyr.
There are important limitations, such as:
- The hardware Crypto accelerator is not supported and thus the non
secur target is NOT secure for production applicatiions in upstream
Zephyr.
- The BL2 is not supported, so no DFU is supported with this support
Most of the code chagnes here are taken from nRF Connect SDK
in order to avoid having noups there.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
The Zephyr base variable is not used below and also is deprecated and
not needed to be set.
Fixes#87950.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add support for processing the Fault Status Registers and recoverable
data abort for the cortex A7.
Based on Cortex-A7 MPCore Technical Reference Manual (ARM DDI 0406).
(see https://developer.arm.com/documentation/ddi0406)
Signed-off-by: Julien Racki <julien.racki@st.com>
In order to support higher frequencies than 8MHz, we need to implement
frequency switching while waking up the RPU, as it has to be done only
at 8MHz, once RPU is awake, we can switch back to the configured (DTS)
frequency.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Disable automatic LFCLK selection for GRTC during driver initialization.
For Zephyr applications it is selected by `sys_clock_driver_init()`
depending on configuration and DTS.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add missing entry for DAI_NXP_MICFIL, which was accidentally removed
during the transition to SDK-NG.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The new SDK-NG is missing some EDMA-related headers/drivers because of
which the 'dma_nxp_edma' driver no longer compiles with it. Mark the new
SDK as unsupported for this platform until this is fixed.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This uses the network packet as is without the need for a copy all the
way till the packet is handed over to RPU.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Increase stack size of supplicant thread to fix crash seen during
enterprise mode connection. Increase heap requirement of hostap
to handle TLS processing failures.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Allow enabling MBEDTLS_RSA_C without key exchange enabled.
This allows to use RSA without enabling x509 support too.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds Kconfig options that allows users to select
- MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
- MBEDTLS_PLATFORM_SNPRINTF_ALT
allowing Mbed TLS to use alternative definitions of STD functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If CONFIG_TFM_BL1 config has been enabled
bl2_signed.bin/hex image will be be generated during build tf-m
these binaries shall be used while generating tfm_merged.hex
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Define BL1 and sign key for BL2 configs and pass them to the TF-M
This will allow to trigger BL1 over zephyr and specify BL2 sign key
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Since there's now a single Kconfig and header file for Mbed TLS it makes
more sense to name them:
- Kconfig.mbedtls (instead of Kconfig.tls-generic)
- config-mbedtls.h (instead config-tls-generic.h)
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
These headers are basically a copy of those found in the official
Mbed TLS repo in the "configs" folder. However these are unmaintaned
(i.e. not updated when Mbed TLS is bumped to a new version) and
also unused in Zephyr. Therefore there's no benefit in keeping
them around.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
First commit to add support for Renesas RA i2c sci-b driver
Signed-off-by: Khoa Tran <khoa.tran.yj@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
The interface workq thread and supplicant handler thread
did not had names set to them. Set the names so that it is
easier to find them from "kernel thread stacks" list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is defined as spis120 rather than spi120,
because spi120 is already used for SPIM120 hardware instance,
but their base address is different.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TOOLCHAIN_DISABLE_WARNING/TOOLCHAIN_ENABLE_WARNING macros are easier
to read and compiler agnostic.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Added configuration for new audio PLL service.
Pull in new service implementation in new hal nordic.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
