In case interface is UP, the interface is added to WPA supplicant in the
iface_wq itself and the max stack size is 4264, so, increase the stack
size of the iface_wq.
If the interface is added via net_mgmt thread then it works fine.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update Cmake to include hal EMDRV header
It also adds dmadrv source when CONFIG_SOC_GECKO_LDMA is selected
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
This driver allow to use Zephyr native IP stack or the IP stack provided
by HAL / WiseConnect.
The WiseConnect implementation may take advantage of the specific
features provided by the 917 (power consumption, speed,
validation...).
Some notable features are not available with this interface:
- It seems Zephyr does not provide API to offload multicast membership
management. User should be to directly call WiseConnect APIs
- Support for ICMP frames is difficult. Note that WiseConnect
automatically answer to ping request. It is just not possible to
send ping requests and receive ping responses.
- Zephyr and WiseConnect both support TLS offloading. However this
patch does not implement it.
- Reentrancy in the WiseConnect side is uncertain.
This implementation has been tested with samples/net/wifi/ (which relies
on subsys/net/lib/shell).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Driver was tested with a custom application which enabled the BT_SHELL.
Basic functionalities were verified:
- Scanning
- Advertising
- Connecting
Configuration needed for the test:
- CONFIG_BT=y
- CONFIG_BT_PERIPHERAL=y
- CONFIG_BT_CENTRAL=y
- CONFIG_BT_SHELL=y
- CONFIG_SHELL=y
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Network Processor (NWP) is used to run WiFi, Bluetooth and Flash
drivers.
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Implement DMA driver for siwx917 using UDMA peripheral. For now,
Scatter/Gather DMA is not yet supported.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Support for random number generator is required for most of the
cryptographic operations, including support for WiFi and TLS.
This driver has been tested with tests/drivers/entropy:
*** Booting Zephyr OS build v3.7.0-4339-g1ec5ce05f9f8 ***
Running TESTSUITE entropy_api
===================================================================
START - test_entropy_get_entropy
random device is 0x8217298, name is rng@45090000
0x93
0x3e
0xf1
0x68
0xd4
0x22
0xbf
0x4d
0xad
PASS - test_entropy_get_entropy in 0.012 seconds
===================================================================
TESTSUITE entropy_api succeeded
------ TESTSUITE SUMMARY START ------
SUITE PASS - 100.00% [entropy_api]: pass = 1, fail = 0, skip = 0 ...
- PASS - [entropy_api.test_entropy_get_entropy] duration = 0.01 ...
------ TESTSUITE SUMMARY END ------
===================================================================
RunID: d1547c805699201af769cb01331efcce
PROJECT EXECUTION SUCCESSFUL
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Added new parameter "A" in wifi connect command to support
CA certificate used or CA certificate skipped for
EAP-TTLS-MSCHAPV2 and EAP-PEAP-MSCHAPV2.
Signed-off-by: Qingling Wu <qingling.wu@nxp.com>
Due to internal dependencies on other modules init priority
the 802.15.4 priority level must be increased. Former init
priority caused the module to be initialied before those
it depends on, so that lead to hard faults.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Adds a new Kconfig for selecting swap using move in MCUboot which
aligns with the proper MCUboot symbol and allows for adding
additional mode Kconfigs
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The offset value in the PSA ITS non-volatile space is dedicated to
OpenThread key reference IDs. This offset must not overwrite any
other ranges already in use within the PSA ITS non-volatile space.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
During experiments it was observed that workqueue uses a maximum of
3872 bytes, so, with cushion added set it to 4096.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When connecting to a WPA3 connection, the max stack size observed was
5456, fix the SoF by increasing by 200bytes (cushion added).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The LVGL OSAL also tries to set the name of threads. Adjust the function
signature accordingly. Also deal with the fact that the type
`lv_thread_prio_t` is not part of the private api and requires a
LV_USE_PRIVATE_API symbol to be enabled.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Make the alignment of the RTT control block configurable, defaulting to
16 bytes. The default is chosen as PyOCD fails to discover the control
block if the 16 byte ID array falls across a 32 byte boundary.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Recent versions fixed issues for EXMIF and TDM pins as well as support
for dynamic placement of the ETR buffer.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Propagate device tree configuration for the power amplifier to
the HAL configuration header.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
When the SiSDK HAL was introduced, a corresponding Kconfig option
was not. Update Series 2 SoCs to use the new option.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
nRF boards have a ROM crunch esp. with combined with Matter/networking
features, as the advanced features are not essential for typical Wi-Fi
operation, disable them by default. Individual samples can choose to
enable it.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
User can assign callback functions to nrfs ipc backend
to be notified when connection is actually established.
Callbacks register needs to be done before nrfs is
initialized.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
This enables silabs series 2 hal source files for the silabs
acmp module to be compiled when the SOC_SILABS_ACMP
configuration is selected.
Signed-off-by: Christian Galante <christian.galante@silabs.com>
Based on few tests, it was observed that WPA supplicant's maximum usage
for connection and disconnection is 4360.
This would save ~4K which is huge as we have a crunch for RAM.
This was missed when hostap was upstreamed from NCS.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add a Kconfig option which can be used to enable vendor HCI extensions for
Silicon Labs EFR32 devices.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
If BLE has already been enabled, `bt_enable` returns immediately
and does not call passed callback function.
In this case, call `bt_conn_cb_register` to ensure that callbacks
are registered correctly.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Currently, `CONFIG_OPENTHREAD_LOG_LEVEL` is used to set log level
in OT and register log modules in Zephyr. OpenThread allows 5
levels, causing issues when `OPENTHREAD_LOG_LEVEL_DEBG` is
selected ad we are trying to register modules with unknown lvl.
This commit adds `CONFIG_OPENTHREAD_MODULE_LOG_LEVEL` which is
aligned for Zephyr's log levels.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Add clocks property to CPUs. nRF54Lx series is using hfpll as clock
source for CPU (and fast peripherals). CPU clock frequency can be
derived from frequency of the source clock so clock-frequency property
is removed from cpu as it is redundant.
nrfx/MDK expects that NRF_CONFIG_CPU_FREQ_MHZ define is set to correct
CPU frequency. Modified nrfx CMakeLists.txt to use clock frequency of
hfpll instead of CPU clock-frequency property.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
-liblc3 added a library-internal path to zephyr_interface containing
a file that collides with common.h required e.g. by Mbed TLS
This commit fixes build-issues by making this include-folder
PRIVATE to the named library liblc3
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
The commit exports control of MBEDTLS_ASN1_PARSE_C, in mbedTLS
module, via Kconfig.
This allows applications to use ASN1 parser independently from
other functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
What is changed?
- Use the updated TF-M that is compatible with the Zephyr's
latest Ethos-U driver repo.
- Change the default behavior of TF-M builds to use Ethos driver
locally fetched by Zephyr, using west update, instead of
downloading it from external repo.
Why is this change required?
- This is to be inline with Zephyr's rules to not fetch code from
external repo.
Fixes#81656
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Selects CLOCK_CONTROL config whenever nRF 802.15.4 Radio Driver
is enabled.
The driver requires HFCLK api available under the config switch.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
This version of the HAL is based on the 2.1.0 release of the Raspberry
Pi Pico SDK.
Update `modules/hal_rpi_pico/CMakeLists.txt` to add the new include
directories to the build. See https://github.com/raspberrypi/pico-sdk/releases/tag/2.1.0
for more information.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
