When both NRF_CLOCK_HAS_XO_TUNE and NRF_CLOCK_HAS_PLL evaluate to 0,
one break statement can end up not associated with any case and become
dead code. Refactor a bit the related switch to avoid such situation.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add nRF specific test to check if it possible for multiple users
to enable XIP independently and also if XIP can be successfully
re-enabled (see fb1d0785ae).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add reference counting in nrf_qspi_nor_xip_enable() so that XIP is
kept enabled as long as there is at least one user that needs it
(boot time enabling done with CONFIG_NORDIC_QSPI_NOR_XIP also counts).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On arrays DT_ENUM_HAS_VALUE() and DT_INST_ENUM_HAS_VALUE()
were only checking the first index, this changes it to check all indexes.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Configure the active discharge feature for both the BUCK and LDO/LDSW
blocks through the appropriate registers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
#78615 Added a check for disallowed Kconfigs which does not work
on Windows machines. Windows machines seem to behave differently when
faced with the \b word boundary marker. I have removed the \b word
boundary marker from the grep commands when os.name=='nt'.
The script performs the same as before for any other os.
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
CM33 must write MEMCONF.POWER[VPR].RET = 0 before entering System OFF.
This bit drives the vprSavedCtx input to VPR. Forcing it low will
disable the Hibernate wake feature in VPR, so that VPR will remain
in its reset state when waking from OFF.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Some macros haven't been properly renamed in previous commits.
Fixes the wrong names that caused compilation errors.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Fix the zperf TCP RX accept error when start both UDP and TCP zperf
server, as the fdtable size is not enough and reserve fd table failed.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
This driver uses the NRF_CLOCK_HAS_HFCLKAUDIO symbol that is defined
in <hal/nrf_clock.h>, so it should explicitly include that header,
not count on this inclusion being done by some other header, like
<zephyr/drivers/clock_control/nrf_clock_control.h>.
Extend also the build assertion that checks if the audio clock can
be used so that now it ensures that the above symbol is defined
(to prevent the driver from silently discarding the audio clock
configured as the clock source).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 7a2ce2882a.
Inclusion of <hal/nrf_clock.h> should not be done based on the NRF_CLOCK
symbol being defined, because it depends on the order in which headers
are included - that symbol gets defined when <nrfx.h> gets included and
this is not necessarily always happening earlier. Instead of adding
inclusion of <nrfx.h> here, move inclusion of <hal/nrf_clock.h> under
`#if defined(CONFIG_CLOCK_CONTROL_NRF)` where it is actually needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
As a software construct that depends upon Bluetooth being enabled,
this device should not be enabled by default. Most nRF SoC's have
internal `RNG` hardware that is much more efficient to access.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Explicitly enable `rng_hci` on nRF5340 application core boards, as the
application core dos not have access to a dedicated RNG hardware
peripheral (limited to the network core).
Signed-off-by: Jordan Yates <jordan@embeint.com>
For 'wifi connect' or 'wifi ap enable' CMD, there is 'invalid option'
error log when input '-i' parameter. Parsing '-i' can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The nucleo_f746zg board doesn't handle RX/TX buffers in
non-cacheable memory when required. This leads to an error
in the test_adc_api with the log:
Supplied buffer is not in a non-cacheable region.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add basic board definition of the u-blox EVK-IRIS-W1-rw612 board.
Adds maintainer info for u-blox boards.
Signed-off-by: Tarang Patel <tarang3399.patel@gmail.com>
If gpio-reserved-ranges to reserve some pins which used by other CPU
Core's OS, we could only handle usable pins owned by current CPU
Core in interrupt handler.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
If GPIO_DISCONNECTED is not supported by GPIO driver, then try to configure
the pin to be input, otherwise there will be some unstable signal between
two test pins.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
If the platform uses SCMI pinctrl driver, pinctrl regitster can't accessed
by CPU Core directly, and currently SCMI pinctrl driver has no API to read
back the register value, so use default pad config value for GPIO pad
configuration, and in theory we could use a fixed pad config value in this
driver as each new GPIO configuration has no relation with previous
configuration.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
It looks like the file was originally copy-pasted
from frdm_mcxn947_mcxn947_cpu1.yaml
but the name was not properly updated.
This commit corrects the name to match the actual board.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Updates the LE legacy pairing procedure as a result of errata ES-24491.
New part:
If the initiating device receives an LP_CONFIRM_R value that is equal to
the LP_CONFIRM_I value, the pairing process shall be aborted and fail
with "Confirm Value Failed" as reason.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Add missing tests for edge cases (ex. peek on empty heap, push to full
heap, ...) to get to 100% coverage (lines & branches)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
make test cases more readable using more direct assert_ macros, for
example zassert_not_null(foo, ...) instead of
zassert_true(foo != NULL, ...).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Increased the default number of TX and RX buffer descriptors from 4 to
16. Since the current default buffer size (CONFIG_NET_BUF_DATA_SIZE) is
128, increasing the number of RX buffers is needed to be able to receive
at least one frame of a maximum size split between multiple buffers.
The default number of TX buffers was increased to match the number of RX
buffers and to be able to transmit large frames with many fragments.
Added build-time configuration validation to ensure that the combined
size of all RX buffers is sufficient to receive a maximum-sized Ethernet
frame.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
DMA copies frames which cannot fit into a single buffer into
multiple receive buffers. Updated the receiving code to combine
these buffers into a net_pkt with multiple fragments.
This allows the driver to handle larger Ethernet frames that
span across multiple DMA buffers.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Always reading from descriptor with index 0 could cause processing
of the buffers in a different order than they were received. Fixed by
reading from the next unprocessed position in the ring of descriptors
instead.
Fixed unused variable warnings.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add test case verifying that offloaded DNS APIs are called as expected
and that enabling/disabling DNS offloading at runtime works.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new socket offloading functions, allowing to enable/disable
offloaded DNS implementation at runtime. This may be useful if there is
a mix of offloaded/native network interfaces in the system, so the
application can choose which DNS backend to use.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
