This commit adds test to assert that thread specific data is deallocated
on thread termination.
Signed-off-by: Jakub Michalski <jmichalski@antmicro.com>
`_current` is now functionally equals to `arch_curr_thread()`, remove
its usage in-tree and deprecate it instead of removing it outright,
as it has been with us since forever.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
As the test uses reentrant time functions like asctime_r or ctime_r,
it should select POSIX_C_LANG_SUPPORT_R. Otherwise there are build
failures observed with the default test configuration if these
functions are not provided by the toolchain.
Signed-off-by: Ilya Tagunov <Ilya.Tagunov@synopsys.com>
Use a string for the mipi-mode property over an integer value, as this
significantly improves the readability of the MIPI DBI device binding.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
flash_copy() is performed on a page.size span but following flash_read()
verification step is performed on EXPECTED_SIZE length (512).
This doesn't work on devices where page.size is lower than EXPECTED_SIZE,
such as STM32L1 where page size is 256.
To fix this, perform verification on the smalest value between page.size
and EXPECTED_SIZE.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Fix some test simulation length be greater than wait time.
These tests completed within 12 seconds, 15 second wait
time is a good value with included margin and a 20 second
simulation time.
These tests failed on this PR CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
What looks to be a copy-paste typo was not caught in
code review.
Change .rwlocks to nothing and move the filter to the
common area.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
To increase coverage.
Note that we call twister separatedly for this target, due to the 54l15
overlays using UARTE20 which is indexed in simulation as "2", but as
the nrf52833 does not have 3 instances. So "-uart2_loopback" is not
a valid option for a 52833 executable.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf54l15 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf54l15 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add minimum flash requirement to the tests. This will effectively
exclude nrf5340dk/nrf5340/cpuapp/ns as it does not have
enough flash for the application.
Fixes#81608
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Optimize filters and remove build_on_all, this option is already used in
the synchronization sample which has more coverage on small platforms.
Since we only build, it does provide basic sanitcheck for the kernel as
well.
This reduces testplan on PRs and push events by almost 1000 entries that
would only be built or filtered at runtime.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add second instance to be tested on nrf54h20dk. uart120 is a fast UARTE
which works on fixed pin locations. It is not available for cpuppr core.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Replace NULL checks for the set and clear registers with BUILD_ASSERTs
in the iCE40 device instantiation.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Change in default flash map generation, where partitions hanging of
disabled devices will not have flash area generated.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit changes the BSIM tests to use the same recv callback
for all tests. The purpose of this is to reduce code duplication
and make it easier to maintain the tests.
This also changes the recv_cb so that in case of any error we log
the most recently received SDU, which should provide more
information about why a test failed in case of RX error.
PBP had to be updated a bit to support the audio_stream
struct.
Also modifies a check and log in bap_stream that was less than
helpful to determine if it was the stream or the endpoint that
was NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor tests to be a bit shorter, so its easier to read
and copy-paste for a new testcase
All idioms like "ret = somecall(); zasser.." are replaced with just
"zassert_ok(some_call());"
Commonly used structures are global and initialized once.
To avoid cross-test side-effects, suite_after-function is added
to cleanup all requests.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Use real-time scheduler with 100x speedup, so timeouts are
accurate enough, but still fast for tests to run.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Updates and aligns the project config file to enable usage of multiple
keys so that users are not required to manually update the project
config file for testing most common mesh scenarios requiring multiple
netkeys and appkeys.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These two new ICs are variants of the nRF54L15 with different memory
sizes:
- nRF54L05: 500KB RRAM, 96KB RAM
- nRF54L10: 1022KB RRAM, 192KB RAM
- nRF54L15: 1524KB RRAM, 256KB RAM
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds two new tests for the Subnet Bridge feature, testing group and
virtual addresses as destinations. The tests are based on the existing
`brg_simple.sh` test, with the addition of a new node and a new subnet
to make sure that messages are bridged to multiple subnets, but only
subnets that have a corresponding entry in the bridging table.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames `bt_mesh_test_send_ra` to `bt_mesh_test_send_data` and changes
the corresponding callback funciton as it is used outside of the replay
attack tests, and can be used to send custom data. The function is
extended to accept a UUID parameter to allow sending data to virtual
addresses.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
