While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.
curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
* Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit does not introduce any functional change to the
codebase. Just removes certain redundant checks from
various CMakeLists.txt files in order to bring more coherence
in the codebase.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Send a fw ready reply message as soon as possible.
This is usually used on host side which is waiting
for this message in order to establish the
communication with the remote processor - see
imx_dsp_rproc driver from Linux.
This can be enabled by IPM_IMX_FW_READY_REPLY config,
which is by default N.
Set CONFIG_IPM_IMX_FW_READY_REPLY as Y for
openamp_rsc_table sample, running on nxp_adsp_imx8m.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
MEC172X has 2 package sizes with additional pins on the -LJ package.
This commit separates the package-specific parts into different files.
In addition, this patch removes unnecessary package-specific enums in
favor of calculated offsets into the desired registers.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Use the new Pytest integration to run testcases against Leshan.
Test with:
twister -T tests/net/lib/lwm2m/functional -p native_posix -vv
This requires Leshan running in localhost using following setup:
tcp/8080 Leshan web interface and REST API
tcp/8081 Leshan bootstrap server REST API
udp/5683 Leshan non-secure CoAP
udp/5684 Leshan DTLS CoAP
udp/5783 non-secure Bootstrap CoAP
udp/5684 DTLS Bootstrap CoAP
Leshan and Boostrap server must be reachable from native_posix
run using IP address 192.0.2.2 as in most of the examples.
Tests are written from test spec;
OMA Enabler Test Specification (Interoperability) for
Lightweight M2M
Following tests are implemented in this commit:
* LightweightM2M-1.1-int-0 – Client Initiated Bootstrap
* LightweightM2M-1.1-int-1 – Client Initiated Bootstrap Full (PSK)
* LightweightM2M-1.1-int-101 – Initial Registration
* LightweightM2M-1.1-int-102 – Registration Update
* LightweightM2M-1.1-int-104 – Registration Update Trigge
* LightweightM2M-1.1-int-105 - Discarded Register Update
* LightweightM2M-1.1-int-107 – Extending the lifetime of a registration
* LightweightM2M-1.1-int-108 – Turn on Queue Mode
* LightweightM2M-1.1-int-109 – Behavior in Queue Mode
* LightweightM2M-1.1-int-201 – Querying basic information in Plain Text
* LightweightM2M-1.1-int-203 – Querying basic information in TLV format
* LightweightM2M-1.1-int-204 – Querying basic information in JSON format
* LightweightM2M-1.1-int-205 – Setting basic information in Plain Text
* LightweightM2M-1.1-int-211 – Querying basic information in CBOR format
* LightweightM2M-1.1-int-212 – Setting basic information in CBOR format
* LightweightM2M-1.1-int-215 – Setting basic information in TLV format
* LightweightM2M-1.1-int-220 – Setting basic information in JSON format
* LightweightM2M-1.1-int-221 – Attempt to perform operations on Security
* LightweightM2M-1.1-int-401 – UDP Channel Security – PSK Mode
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fix CIS assymmetric PHY usage by adding implementation to
use correct PHY in radio when switching transceiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds note on addition of
MCUBOOT_BOOTLOADER_MODE_WITH_DOWNGRADE_PREVENTION
to MCUboot Kconfig module.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add the MCUBOOT_BOOTLOADER_NO_DOWNGRADE Kconfig option that allows,
when paired with MCUboot mode Kconfig, to indicate that the MCUboot
has been configured with downgrade prevention, which means that only
application with version higher than running can be swapped on next boot.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
NOCACHE_MEMORY depends on ARCH_HAS_NOCACHE_MEMORY_SUPPORT, so
don't try to select the symbol if not supported.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Fix missing NRF_CCM subscribe clear which can lead to
spurious trigger of TASK_CRYPT in NRF_CCM. This may
lead to corruption of Rx PDU buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refines the `system_mm.h` to include `zephyr/types.h` instead
of `zephyr/kernel.h` as that is all it needs.
Updated the includes of `mm_drv_ti_rat.c` accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Update loramac-node to release v4.7.0 from v4.6.0. The `v4.7.0-zephyr`
branch contains the same 4 additional commits as `v4.6.0-zephyr`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
We must send the packet without queueing it. The pkt has already
been queued for sending, once by net_if and second time in the ARP
queue. We must not queue it twice in net_if so that the statistics
of the pkt are not counted twice and the packet filter callbacks
are only called once.
Fixes#62483
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Added a test case that generates a 160 MHz system clock
using a 16777216 Hz HSE clock and also using a 16 MHz HSI
Signed-off-by: Jatty Andriean <jandriea@outlook.com>
Based on RM0456, each PLL in the STM32U5 has the
capability to work either in integer or fractional mode.
In this update, the fractional mode can be enabled
by setting the fracn value in the device tree.
Signed-off-by: Jatty Andriean <jandriea@outlook.com>
Split the read function into 2 versions (date and no date) since they
don't have common code.
It improves readability.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add support for using the sub second registers. It allows reading and
setting alarm with the sub second tick resolution.
The RTC module is configured to get as high frequency as possible, which
equals the source clock (RTCCLK) divided by 2. To get such frequency,
the asynchronous prescaler is set to 1.
According to RM, setting the asynchronous prescaler to a high value
minimize consumption, so the change increase the power consumption.
Use a config to enable the sub second support.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
RTC drivers uses only seconds, so transition to microseconds is
necessary.
Change way of calculation tick<->time to avoid unnecessary
conversations.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Synchronize reading two separate registers. In some edge cases the read
registers could point different dates.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The config values have been hardcoded as magic values. Introduce
universal calculation based on the DTS entries.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
This code uses the `NRF_DT_GPIOS_TO_PSEL` macro, so it should include
`<soc.h>` explicitly and not rely on the header being included by some
other one.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The commit adds support for uploading image to board with MCUboot
configured with DirectXIP with revert.
It allows to set uploaded image either for test or as permanent
boot application, until newer image gets confirmed.
Note that in DirectXIP with revert MCUboot will remove image
that has not been set for test nor confirmed and MCUmgr does not
set either mode unless image has the mode set within uploaded
binary.
The commit adds Kconfig option
CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP_WITH_REVERT
that enabled the new mode of operation within MCUmgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
These headers are using things like `uint32_t` & devicetree
macros, so they should include the `devicetree.h` & `types.h`.
Otherwise they depend on the parent file to have those headers
included before they are included.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When these base addresses are defined to be zero, the
assertions test will be comparing an unsigned int against zero
which result in compilation warning, and will be raised to
error in Twister
Fix them by conditional compilation
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This adds a note on the changes related to the device
initialization macros and removal of two kconfigs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This separates the DT device init macros into two: one for
UART accessed via IO port or MMIO, the other for PCIe UART.
All the conditions needed to setup the device structs are
getting complicated. Hopefully separating them would make
them easier to decode, and to avoid the conditions having
too many levels.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The old CONFIG_UART_NS16550_ACCESS_IOPORT has been used to
indicate whether to access the NS16550 UART via IO port
before device tree is used to describe hardware. Now we have
device tree, and we can specify whether a particular UART
needs to be accessed via IO port using property io-mapped.
Therefore, CONFIG_UART_NS16550_ACCESS_IOPORT is no longer
needed (and thus also CONFIG_UART_NS16550_SIMULT_ACCESS).
Remove these two kconfigs and modify code to use device tree
to figure out how to access the UART hardware.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of PCIE0 and PCIE1, use no suffix for IO port/MMIO IRQ
configuration funct, and suffix PCIE for IRQ config on PCIE
bus.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use CODE_CODE_1() instead of macro trampolines when
CONFIG_UART_NS16550_PARENT_INIT_LEVEL is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using COND_CODE_1() is more intuitive when looking at the code,
instead of some macro trampoline magic.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This simplifies DLF and PCP enabling devicetree macros with
DT_ANY_INST_HAS_PROP_STATUS_OKAY() instead of the complicated
ones.
Also, this moves the macro to initialize struct elements into
the struct initializer itself. This makes it clearer on which
element is being initialized directly inside the struct
initializer instead of having to do mental macro trampoline
to find the correct macro.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The table of contents for the samples' catalog was showing too many
levels for some sections.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled intel LPSS DMA interface using dw common to support
usage of internal DMA in LPSS I2C to transfer and
receive data.
Signed-off-by: Bindu S <bindu.s@intel.com>
hal_radio_tx_chain_delay_ns_get() was incorrectly
returning the microsecond value, resulting in a 1us
error in the timing => Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align the header a bit with the one for the real radio,
adding missing Tx power levels and removing TODO which did not
need doing.
The old one originated as a copy of the nrf52833 one, and did not
evolve like the real ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
