Erratum 19: SPU region size is 32 kB instead of 16 kB.
The config should be used for alignment for data that must follow SPU
region boundaries, and to enable runtime checks when configuring SPU
regions.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enable counter driver support for H7 series. Tested with H743ZI MCU
using samples/drivers/counter/alarm.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
The sole purpose of init options has been to enable hardware flow
control on NS16750 when asked. Use the proper DTS tags for this.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
This commit updates the `qemu_cortex_a53` platform to use the
refactored AArch64 interrupt system.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the `xilinx_zynqmp` platform to use the refactored
AArch32 interrupt system.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add support for sleep states. Sleep state 1 corresponds to idle mode,
and Sleep state 2 corresponds to standby mode, as per the Technical
Reference Manual.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit adds an option to configure the frequency
in Hz for the HFRCO clock source. The default value
for this option is 0 which skips the configuration of the HFRCO.
This feature is supported for efm32gg, efm32jg, efm32pg, efm32fg
and efm32mg SOCs currently.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
Ring buffer in memory backend does not depends on xtensa adsp board,
so make it general: remove to log_backend_rb and remove dependency on
up_squared_adsp.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The 48MHz PLL on MEC1501 is shut off during deep sleep (i.e. heavy
sleep in datasheet). When coming out of deep sleep, this PLL needs
about 3ms to lock. Most peripherals are using this PLL as clock
source and timing would be off before PLL is locked. Example of
this is seen on serial console where garbage characters are sent
as the UART block is not pushing characters out at the configured
baud rate. This likely affects all other peripherals such as I2C
and eSPI. Luckily, there is a register to indicate whether the PLL
is ready. So spin on it when coming out of deep sleep.
Fixes#23207
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_. The driver mostly used DT_INST_ defines but
a few IRQ priority defines needed conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_.
As part of this change we utilize the device tree for GIRQ info and
rename timer3 to 2 since we are doing this by instance number.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The max-value should just be an int and not an array. Change the type
to 'int' in the binding and fixup the driver to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ILITEK ILI9340 should have been in the dts and added as #defines in
dts_fixup.h. Fix this by adding a display node in the dts.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. Replace dts_fixup.h use
for DT_RTC_0_NAME with DT_INST_0_NXP_KINETIS_RTC_LABEL to be
consistent. Also, remove the aliases that had been used for this
driver in various nxp_k*.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines and remove Kconfig per instance
enablement in favor of DT_INST_ define existing. Also, remove the
aliases that had been used for this driver in nxp_rt.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the hal_nordic module revision, to apply the following changes:
nrfx_config: Fix translation of symbols for _S or _NS only peripherals
For peripherals with only one type of access available (either secure
or non-secure), the common symbol translation scheme cannot be used
as it leads to mapping to non-existing symbols (e.g. NRF_FICR_NS).
Instead, use fixed translations for these symbols (e.g. NRF_FICR to
NRF_FICR_S, only for secure images).
nrfx_config: Add missing _S/_NS symbol translations for nRF5340/nRF9160
Add translations of names with _S and _NS suffixes for peripheral
access symbols that are available for a given chip but were not used
so far in any nrfx HAL or driver, to make the lists of translations
complete and consistent.
This commit corrects also the translation of NRF_I2S symbol for nRF5340
whose name for this SoC contains also the index 0 (so it needs to be
handled similarly like NRF_PDM0 is).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Configure the LDO supply when initializing H7 (M7) SoC. I have
observed MCU hanging on LL_PWR_IsActiveFlag_VOS() wait loop when
doing a cold boot if LDO supply is not explicitely enabled.
According to the datasheet LDO should be enabled by default,
however HAL examples also configure LDO, so there may be a
reason to perform such step.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
