drivers: uart: miv: convert to DT_INST defines

Convert driver to fully use DT_INST_ defines.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2020-02-17 10:16:39 -06:00 committed by Kumar Gala
commit 4372efe4ef
4 changed files with 6 additions and 21 deletions

View file

@ -6,7 +6,6 @@ CONFIG_BOARD_M2GL025_MIV=y
CONFIG_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_MIV=y
CONFIG_UART_MIV_PORT_0=y
CONFIG_UART_CONSOLE=y
CONFIG_PLIC=y
CONFIG_RISCV_MACHINE_TIMER=y

View file

@ -9,10 +9,3 @@ config UART_MIV
select SERIAL_HAS_DRIVER
help
This option enables the Mi-V serial driver.
config UART_MIV_PORT_0
bool "Enable Mi-V Port 0"
depends on UART_MIV
help
This tells the driver to configure the UART port at boot, depending on
the additional configuration options below.

View file

@ -379,7 +379,7 @@ static const struct uart_driver_api uart_miv_driver_api = {
#endif
};
#ifdef CONFIG_UART_MIV_PORT_0
#ifdef DT_INST_0_MICROSEMI_COREUART
static struct uart_miv_data uart_miv_data_0;
@ -388,16 +388,16 @@ static void uart_miv_irq_cfg_func_0(struct device *dev);
#endif
static const struct uart_miv_device_config uart_miv_dev_cfg_0 = {
.uart_addr = DT_MIV_UART_0_BASE_ADDR,
.sys_clk_freq = DT_MIV_UART_0_CLOCK_FREQUENCY,
.uart_addr = DT_INST_0_MICROSEMI_COREUART_BASE_ADDRESS,
.sys_clk_freq = DT_INST_0_MICROSEMI_COREUART_CLOCK_FREQUENCY,
.line_config = MIV_UART_0_LINECFG,
.baud_rate = DT_MIV_UART_0_BAUD_RATE,
.baud_rate = DT_INST_0_MICROSEMI_COREUART_CURRENT_SPEED,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
.cfg_func = uart_miv_irq_cfg_func_0,
#endif
};
DEVICE_AND_API_INIT(uart_miv_0, DT_MIV_UART_0_NAME,
DEVICE_AND_API_INIT(uart_miv_0, DT_INST_0_MICROSEMI_COREUART_LABEL,
uart_miv_init, &uart_miv_data_0, &uart_miv_dev_cfg_0,
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
(void *)&uart_miv_driver_api);
@ -412,4 +412,4 @@ static void uart_miv_irq_cfg_func_0(struct device *dev)
}
#endif
#endif /* CONFIG_UART_MIV_PORT_0 */
#endif /* DT_INST_0_MICROSEMI_COREUART */

View file

@ -1,7 +0,0 @@
/* SPDX-License-Identifier: Apache-2.0 */
/* UART 0 */
#define DT_MIV_UART_0_BASE_ADDR DT_MICROSEMI_COREUART_70001000_BASE_ADDRESS
#define DT_MIV_UART_0_CLOCK_FREQUENCY DT_MICROSEMI_COREUART_70001000_CLOCK_FREQUENCY
#define DT_MIV_UART_0_BAUD_RATE DT_MICROSEMI_COREUART_70001000_CURRENT_SPEED
#define DT_MIV_UART_0_NAME DT_MICROSEMI_COREUART_70001000_LABEL