Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_. The driver mostly used DT_INST_ defines but
a few IRQ priority defines needed conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_.
As part of this change we utilize the device tree for GIRQ info and
rename timer3 to 2 since we are doing this by instance number.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. There was just one case for
CS_GPIOS that wasn't using DT_INST defines already.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to fully use DT_INST_ defines. Currently IRQs are not
generated from DTS on esp32 so we create #defines for what they should
look like. Convert the IRQ defines to match DT_INST style so if/when
we have that info in DTS it will look the same.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. Replace dts_fixup.h use
for DT_RTC_0_NAME with DT_INST_0_NXP_KINETIS_RTC_LABEL to be
consistent. Also, remove the aliases that had been used for this
driver in various nxp_k*.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines and remove Kconfig per instance
enablement in favor of DT_INST_ define existing. Also, remove the
aliases that had been used for this driver in nxp_rt.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert pms7003 sensor driver to utilize device tree.
DTS would look something like the following for the pms7003:
uart {
pms7003: pms7003 {
status = "okay";
compatible = "plantower,pms7003";
label = "pms7003";
};
};
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ak8975 sensor driver to utilize device tree.
This also supports the ak8975 embedded in a invensense MPU9150. In such
a case the device tree node should look something like, where the ak8975
is a child of the mpu9150.
mpu9150@68 {
compatible = "invensense,mpu9150";
reg = <0x68>;
label = "mpu9150";
#address-cells = <1>;
#size-cells = <0>;
ak8975@c {
compatible = "asahi-kasei,ak8975";
reg = <0xc>;
label = "ak8975";
};
};
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix build failure when CONFIG_NET_L2_OPENTHREAD is not enabled. The
failure looks as follows:
drivers/ieee802154/ieee802154_nrf5.c:187:12:
warning: 'nrf5_energy_scan_start' defined but not used
[-Wunused-function]
static int nrf5_energy_scan_start(struct device *dev,
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Previously, endpoint configuration would reserve memory in the packet
memory area which would never be reclaimed. After this patch, endpoints
will reuse previously allocated memory when possible. We still leak
memory when reconfiguration increases the max packet size for a given
endpoint number, but this fixes the common case.
Bug: https://github.com/zephyrproject-rtos/zephyr/issues/23178
Signed-off-by: Josh Gao <josh@jmgao.dev>
Update hal_nordic's revision, so that NRFX_ASSERT uses __ASSERT_NO_MSG
directly, not through the assert macro that comes from from libc,
as the definition of the latter might be different when some specific
libc version is used, and this could generate troubles.
Replace also uses of assert() with __ASSERT_NO_MSG() in nrfx driver
shims that use this macro without including the corresponding header
file (i.e. that implicitly rely on assert.h being included from
nrfx_glue.h, which is no longer the case).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Rework USB_DeviceNotificationTrigger(). Fix style.
Drop messages from USB_DeviceEhciCancel().
MCUX EHCI driver notifies about canceled transfers,
but there is no specific code for this event in
usb_device_callback_message_struct_t, the only way to
recognize it is to check the length value.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
User is currently able to enable verbose packet debugging for
received packets. This commit enables the same for sent packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this patch, the specific flag IWDG_STM32_START_AT_BOOT
is replaced by the zephyr generic WDT_DISABLE_AT_BOOT.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Implement function and necessary callbacks to handle Energy Scan feature
of the nRF radio driver needed by some radio stacks.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Data toggle should be reset after SetConfiguration or
SetInterface request.
Always reset data toggle in usb_dc_ep_enable.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
USB Host expects dtoggle to be cleared after ClearFeature(Halt):
"[...] clearing the Halt feature via a ClearFeature(ENDPOINT_HALT)
request results in the endpoint no longer returning a STALL.
For endpoints using data toggle, regardless of whether an endpoint
has the Halt feature set, a ClearFeature(ENDPOINT_HALT) request always
results in the data toggle being reinitialized to DATA0."
- Subsection 9.4.5 of usb 2.0 spec (usb_20.pdf)
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Add I2C and SPI bus communication routines in separate files,
and register one or the other as read/write callbacks based
on bus selection in DTS.
This commit is fixing issue #22348 as well, as the SPI part
is handling in the proper way the CS GPIO part.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
