All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_"
in their names, assumed to be generated by the extracting script,
are updated with the DT_ prefix, to reflect the recent changes made
to the script.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Previously we had a set of magic #define's in board.h that would both
enable and set the GPIO controller & pin if a given board used a GPIO
for USB VBUS. Now we make it a proper Kconfig set of options that
specify if the feature is needed, the GPIO controller device name, and
pin number. In the future this should move to devicetree.
Updated the related boards that used this feature to set the Kconfig
options in the Kconfig.defconfig
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added support for ST B-L072Z-LRWAN1 board configuration.
This board uses the same MCU as Dragino-LSN50.
Signed-off-by: Aleksandr Makarov <seems.deviant@gmail.com>
Removed pin 20 which by default is connected to QSPI memory.
Removed conflict with default pin assignment for UART 1.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Convert the BMI160 to use Device Tree to get SPI and GPIO params instead
of Kconfig. Updated samples, tests, and arduino_101_sss board support
for this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Application should be responsible for enabling various drivers and
features, we should not enable everything by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update olimexino_stm32 configuration to match with default
configuration guidelines:
- Configure available UEXT connector which is available
on olimex boards.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In #10543 some include directives are modified to include some
folders in the path to the nrfx hal headers.
This would break things with the previous nRF52 HW models as the
replacement hal files were not placed in a folder matching that
path, and the include path was not pointing directly at the folder
containing the files.
Therefore, require the latest HW models version (which replicates
that folder structure), and add a new -I for the compiler 2 folders
higher.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This required wiring external daughter board by hand, it's not provided
by the board directly, let's remove this.
Applying the change on relevant samples.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update stm32f469i_disco configuration to match with
default configuration guidelines:
-Configure available connectors
-Update yaml file
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32f723e_disco configuration to match with
default configuration guidelines:
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32f769i_disco configuration to match with
default configuration guidelines:
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32l496g_disco configuration to match with
default configuration guidelines:
-Deactivate features by default
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update disco_l475_iot1 configuration to match with
default configuration guidelines:
-Deactivate features by default
-Configure available connectors
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This makes it possible to "ninja debug" to start debugging
towards the onboard debugger of the TB2 board.
Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
The only difference between the F413xH and F413xG is flash memory size.
STMF413xH: 1536 Kbytes
STMF413xG: 1024 Kbytes
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Remove either duplicate settings between arch & board, or just set
HAS_DTS at the arch level since all the boards for a given arch support
DTS now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This enables the USBHS interface on the Atmel SMART SAM E70 Xplained
Board, by adding an entry to the DTS. It also updates the documentation
and mark usb_device as supported for the tests.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Other ST boards have their openocd.cfg support file updated,
but Nucleo L476RG was still looking for board/st_nucleo_l476rg.cfg
and fails with Zephyr SDK 0.9.5.
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
Options "-clock dynticks" and "-balloon none" are deprecated and
produce warning in recent Qemu versions, so remove them.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the samples use DT generated defines we can remove the
hexiwear_k64 specific ones in board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the Red, Green, & Blue PWM LED info to the device tree. We will use
this in the future for any samples that utilize PWM on these LEDs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No need to check for BT being enabled. The UART entries will be
available for use if BT is enabled and will do nothing if not.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The wncm14a2a modem is an add-on/shield and not part of the frdm_k64f
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board can run in recent qemu versions (>3.0.0), so enable it
instead of a dedicated qemu board.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the uart_miv driver to get params like name, addr, baud-rate,
clock freq from DTS generated defines. Fixup related board and soc code
as needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add minimal DTS support for the m2gl025_miv. The dts just has the core,
SoC, PLIC, and UART described. We still get memory related info from
Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adding watchdog driver for sam SoC. The current implemntation just
diables the watchdog on device boot.
This PR adds the following support for SAM3X, SAM4S and SAME70
1. Activate processor reset
2. Activate all reset
3. Generate interrupt on watchdog timer expiration.
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
