Now that we have SDK 0.10.0 we can enable building this board with the
Zephyr toolchain. SDK 0.10.0 introduced support for the ARM v8m based
cores which these boards utilize.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Appears within an 'if BOARD_NRF52_BSIM' in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Appears within an 'if BOARD_NATIVE_POSIX' in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The nRF52840-based Particle.io boards have an external flash
module that is connected via SPI interface. Originally,
the goal was to place the flash part into deep power down
mode and save 9 uA in sleep mode, but this was never
implemented in a board initialization file.
Let's remove the default y behavior for SPI as each sample
will turn it on if needed, and it can cause certain out of
tree samples to behave badly (where CONFIG_MULTITHREADING=n).
Long term: we need a better solution for handling samples
that don't fit the requirements for certain drivers, but
for now this will clean up some board usability issues.
Signed-off-by: Michael Scott <mike@foundries.io>
Most of these are from source'ing a file within an 'if PINMUX', and then
adding another 'depends on PINMUX' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. There are no "conditional includes" in Kconfig, so
'if FOO' has no special meaning around a 'source'. Conditional includes
wouldn't be possible, because an 'if' condition could include (directly
or indirectly) forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
JLink V6.44 (2019-03-01) added support for the imx rt1064 soc, including
programming the internal flash on flexspi2. Updates the mimxrt1064_evk
board to use the internal flash and external sdram memories by default,
now that the debug tools support them.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Do not enable by default both I2C and SPI nodes for the peripherals
with the same instance number, since they use the same MMIO base
address and DTC will issue a warning in such situation.
This patch corrects dts files for the following boards:
- nrf51_pca10028
- nrf52_pca10040
- nrf52840_blip
- nrf52840_pca10056
- nrf52840_pca10059
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
SPI_0 cannot be used simultaneously with I2C_0, since in nRF52832 SoC
these instances share certain hardware resources.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To build apps for mcuboot, a zephyr,code-partition needs to be
identified in the DTS chosen block. Without this entry, the
following configs will always be 0:
CONFIG_FLASH_LOAD_OFFSET
CONFIG_FLASH_LOAD_SIZE
Signed-off-by: Michael Scott <mike@foundries.io>
According with MISRA-C every switch-clause must terminate with an
unconditional break.
MISRA-C rules 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Reduce unnecessarily large images of boards (> 1MB)
Also fixed typo in doc title for mec2016evb_assy6797
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The creation of the udev rule requires the user to be root else
it will fail. Update the text of the documentation to make it clearer
and change the shell prompt of the command to '#'
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever. Disabled log in qemu_xtensa board due to lack
of backends.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
UART_QMSI_0_BAUDRATE was removed by commit 17c6456678 ("drivers/uart:
Use dts to set uart priorities for QMSI driver").
There's a reference to CONFIG_UART_QMSI_1_BAUDRATE as well, but getting
rid of it requires documentation updates.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We expect that identifier in yaml will match board name for sanitycheck.
Change the identifier to match so sanitycheck runs propertly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The MMIO addresses for peripherals are being assigned by BIOS
at boot. Different BIOS versions and number of enabled peripherals
affect how those addresses are assigned. This invalidates
the addresses for UART defined in DTS. Turn on PCI enumeration
so UART addresses are probed at boot to avoid non-usable
UART and black console.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On nrf52810_pca10040 board, the nRF52810 SoC is emulated on nRF52832.
This patch overrides for this board the number of cycles consumed by
one iteration of the internal loop in `nrfx_coredep_delay_us()` (used
by `k_busy_wait()`), so that the value adequate for nRF52832 is used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In the recent MDK brought by nrfx 1.6.2, these legacy peripherals have
been revealed as available also in nRF52810. This patch allows their
use in Zephyr drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The i.MX RT1064 evk has one ethernet (10/100M) connector via KSZ8081RNB
phy. Enable related dts nodes and config flags
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The command to create the board image binary file assumes the input
is always called zephyr.bin. This is not always the case if custom
name is defined in CONFIG_KERNEL_BIN_NAME. So update the call of
command to use CONFIG_KERNEL_BIN_NAME.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Recent versions of GCC won't build grub-2.02 because they're more
pedantic about warnings. This has been fixed upstream but is not
yet part of any release. The build script is modified to apply the
relevant commits before building.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This fix allows Renode to resemble the time flow of the hardware more
precisely. The performance value was established manually, there is no
indication in the docs on what is the average performance.
It allows tests/posix/common/portability.posix to pass, but fails on
tests/kernel/lifo/lifo_usage/kernel.lifo.usage.
The latter also fails on hardware.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
This commit adds a patch in the Kconfig.defconfig file of
nRF9160_pca10090 board, that instructs the linker to restrict
the Secure image to the size of its code partition, if the
image is to be combined with a Non-Secure image. Secure images
without accompanying Non-Secure firmware (i.e. with symbol
TRUSTED_EXECUTION_SECURE not set) can use the entire flash.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to overwrite the reg property of flash0
in nrf9160_pca10090 default partitioning. The property
reflects the flash resources of the SOC, and is passed
in the .dtsi file of nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Most of the other nRF52832 boards have the following settings for
scratch and storage partitions:
scratch_partition: partition@70000 {
label = "image-scratch";
reg = <0x00070000 0xa000>;
};
storage_partition: partition@7a000 {
label = "storage";
reg = <0x0007a000 0x00006000>;
};
Let's adjust the scratch size to align with the others and add the
storage partition so that settings and FS samples will work.
Signed-off-by: Michael Scott <mike@foundries.io>
The MPU should have been enabled on all these boards since they have
Cortex-M7 and need mpu for caching support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Most of the other nRF52832 boards have the following settings for
scratch and storage partitions:
scratch_partition: partition@70000 {
label = "image-scratch";
reg = <0x00070000 0xa000>;
};
storage_partition: partition@7a000 {
label = "storage";
reg = <0x0007a000 0x00006000>;
};
Let's remove the snowflake settings in BLENano2 which coincidentally
are incorrect: storage overruns the flash area by 0x1000 and causes
a crash when enabling FCB storage.
Signed-off-by: Michael Scott <mike@foundries.io>
Remove most unnecessary instances of `export` and `cmake` use that can
instead be replaced with `zephyr-app-commands` or similar. This is to
avoid documentation using different mechanisms to describe the same
actions and in preparation for documenting `west build` everywhere.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove DCACHE_WRITEBACK Kconfig variable definition in Intel S1000
DMA driver. Remove the variable from default configuration as well.
Cache configuration is fixed and the cache operation routines
internally take appropriate action based on the cache configuration.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added more detailed information how to connect Zephyr instance
to host system like Linux desktop.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mimxrt1060_evk was missing hwinfo in the supported list. All other
imx rt boards already have it.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes Segger RTT on the hexiwear_kw40z and usb_kw24d512 boards by
setting CONFIG_RTT_CONSOLE=y and CONFIG_USE_SEGGER_RTT=y.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
