Reworks the programming and debugging section in the mimxrt1020_evk and
mimxrt1050_evk board documents to leverage the new debugging guide
covering debug probes and host tools.
These boards support both the OpenSDA J-Link onboard debug probe and the
J-Link external debug probe.
Corrects an error linking to the wrong OpenSDA J-Link firmware.
Updates the flashing section to reflect that the ``flash`` build system
target is now supported.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
* the original configurations are configured with stack checking
* the new configurations are configured with mpu stack guard
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The GPIO driver is required by this board's initialization code, hence
it is forced to be enabled always, not only enabled by default like on
other boards equipped with an nRF SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch enables the GPIO driver by default on all boards equipped
with an nRF SoC (all boards having `CONFIG_SOC_FAMILY_NRF=y` in their
`_defconfig` file).
In vast majority of cases the driver is needed, so it is more
convenient to enable it at board level than in particular
applications.
And if the driver is undesired for some reason, it can be still
disabled in the application config.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Set FLASH_LOAD_OFFSET correctly (accounting for Nordic MBR) when
BOARD_HAS_NRF5_BOOTLOADER is defined and we're not compiling MCUboot.
MCUboot will select USE_CODE_PARTITION, which will make it link
correctly regardless of which board DTS is used (stock/debugger).
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Python tip:
for i in range(n):
some_list.append(0)
can be replaced with
some_list += n*[0]
Similarly, 3*'\t' gives '\t\t\t'.
(Relevant here because pylint flagged the loop index as unused.)
To do integer division in Python 3, use // instead of /.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
nrf52840_pca10056 and nrf52_pca10040 was enabling RTT by default
for all samples. It has some implications like forwarding printk
to logger and that, as a default behavior, may not be welcomed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The nRF91 DK User Guide clearly says "the LEDs are active high,
meaning that writing a logical one ('1') to the output pin will
illuminate the LED".
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable TIMER1 by default in nrf9160_pca10090 so it can be selected
by user for hardware byte counting in UARTE or other purpose.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Making a clean slate for some pylint CI tests. Only enabling relatively
uncontroversial stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Following fix SRAM size to take into account CCM,
enable CCM and update yaml files in boards including fixed soc
dtsi definitions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
One of the bullet list items didn't get rendered properly because
continuation line wasn't indented.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As em7d is configured with HARVARD, CCM will be used not DDR,
SRAM should point to DCCM.
This bug will cause the wrong caculation of heap area,
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
When using V0.10.0 SDK, flashing is not working anymore on
stm32f4_disco.
Using st_nucleo_f4.cfg instead of stm32f4discovery.cfg solves
the issue.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move the original documentation in the arduino_101 board to a common
section in the Bluetooth documentation and document the use of `btmon`
in general.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add the bt-mon-uart chosen node to all the nRF-based boards so that they
can all use CONFIG_BT_DEBUG_MONITOR without additional changes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Based on prior work by @dcpleung. It's suboptimal, but it provides a
working starting point for ACRN work. The x86 board/SoC abstractions
really need to be refactored to make this "board" (and other x86-based
"boards", both extant and future) cleaner and easier to maintain. Punt.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Added some more content to the section about how to simulate
with BabbleSim and a couple of extra links.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixes the apds9960 i2c address on the reel_board. Found while converting
the apds9960 driver to use the i2c address from device tree rather than
a hardcoded value in apds9960.h.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
It is also possible to use 'west' to build the 'hello_world' sample
application for the UP2 (up_squared) board. This patch makes it
explicit in the documentation.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
USB is already being configured in pinmux.c, but for it to be
availiable it also needs to be enabled in the device tree.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This is a vestiage of how board ports use to work, we have since removed
the need for board.h to exist on all board ports. Remove the file since
its not needed and doesn't do anything useful.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* separate the ARC MPU driver into 2 parts
* arc_mpu_v2_internal.h for ARC MPUv2
* arc_mpu_v3_internal.h for ARC MPUv3
* For ARC MPUv2, keep the main design, but update and optimize the code
* For ARC MPUv3, implement mpu region split to supprt MPU region overlap
* misc updates and bug fixes
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The build_grub.sh script cherry-picks 3 commits from the master branch
of grub because more recent build tools fail to build the latest stable
release (which is 2.02). This solves the problem on Fedora 29 for
example, but is not sufficient for Clear Linux.
This patch modifies the build_grub.sh script to use
grub-2.02-285-g5bc41db75 (latest from master as of 13 of March 2019).
That version compiles 'out-of-the-box' in the latest Ubuntu, Fedora and
Clear Linux.
There are additional tools required on the host system and the
documentation has been updated accordingly.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Updates the documentation to show PC13 instead
of PB12 as deafult LED Pin. Also adds note
about the default LED based on version of board.
Includes the change that needs to be made to
the dts file for changing default LED pin
Signed-off-by: Suryansh Sharma <suryansh@evilscientist.cc>
efm32pg_stk3402a and lpcxpresso54114_m0 board yaml files didn't set
xtools under the toolchain category, fix that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can turn this off in application code, but the default should be
SMP.
Oddball note: the SMP setting is in the soc layer and not arch, even
though I think it would be better there. We don't actually have a
per-arch defconfig file included by kconfig.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000 to nucleo_l053r8_defconfig.
All STM32 boards seem to have this defined.
Makes samples with ksleep work properly.
Signed-off-by: Anthony Kreft <anthony.kreft@gmail.com>
Since NET_L2_BT no longer "select"s BT and the rest of required BT
features, enable them within the defconfig file.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Configure lvgl defaults for imx rt boards in their respective board
defconfigs rather than the lvgl sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This build target is intended to verify that enabling the
IAMCU ABI doesn't have any bit-rot since we can easily
run this under emulation.
However, the QEMU boards all derive from the generic IA32
SOC definition, which is any pc-like hardware. We need
to disable these mitigations for this target since the
IAMCU compiler doesn't even recognize instructions like
'lfence'.
Fixes: #14315
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fedora 29 (and possibly other disctributions) are nowadays coming with
very recent versions of gcc (8.x) and binutils. These will cause some
compilation error when running the 'grub_build.sh' script to create a
GRUB2 boot loader image.
Fortunately, both issues have been fixed and merged in the upstream
project. This patch modifies the build script to cherry-pick those to
the local cloned version of grub before building it.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
