There are 2 other timers that could be selected, let's just take the
first 32bits one. This should be sufficient to verify the driver.
Enabling the timer in relevant board's dts file as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configuration item custom busy wait is required for all MEC1501
series if its RTOS timer driver is enabled. We moved the selection
of the timer from board level to MEC1501 SoC level.
Frequency selection remains at the board level.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Enables the arm v7m mpu on the lpc54114 m4 core. Reuses the mpu
configuration from the i.mx rt, which has the same mpu.
Tested on hardware with tests/kernel/mem_protect
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update configuration of arduino_due board to use a common gpio_sam
driver rather than sam3x specific gpio_atmel_sam3. The gpio_atmel_sam3
driver is going to be deprecated.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
stm32mp157c_dk2 Arduino header lack A2 and A3 pins which
are assigned to non GPIO pins.
Remove optional shields properties that are using one of these
pins by providing board overlays to the impacted shields.
Fixes#19079
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Rename doc/nucleowb55rg.rst to doc/nucleo_wb55rg.rst so the file name
matches the name of the board it is documenting.
Signed-off-by: Robert Weber <robertweber95@gmail.com>
As recommended in cmake/app/boilerplate.cmake, ZEPHYR_BASE should
be preferred to PROJECT_SOURCE_DIR.
Do the change for all boards still referring to PROJECT_SOURCE_DIR.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* Exlude _m4target from net tests as they assume SERIAL is enabled,
which is not the case (yet).
Fixes: #19065
* Zephyr drivers headers were moved from include/ to include/drivers.
Update pinmux.h path to the new location.
* Add missing status line on joystick_left dts node.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix nucleo_f411re default configuration by deactivating I2C support.
Additionally fix wrong comment and end of file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The LIS2MDL is not a combo device, but pure magnotemeter.
Hence, '-magn' extension is not adding information and can
be removed from dts compatible name as well as binding filename.
Instead specify '-i2c' or '-spi' to distinguish between the names.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
From the Jailhouse days, this has been a function call. That's silly.
We now inline the EOI in the ISR when in x2APIC mode. Also clean up
z_irq_controller_eoi(), so it now uses the inline macros.
Also, we now enable x2APIC on up_squared by default.
Fixes: #17133
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
XIP support in x86 was something of a mess. This
patch does the following:
- Generic ia32 SOC no longer defines a "flash" region
as generic X86 devices don't have a microcontroller-
like concept of flash. The same has been done for apollo_lake.
- Generic ia32 and apollo_lake SOCs starts memory at 1MB.
- Generic ia32 SOC may optionally have CONFIG_XIP enabled.
The board definition must provide a flash region definition
that gets exposed as DT_PHYS_LOAD_ADDR.
- Fixed definitions for RAM/ROM source addresses in ia32's
linker.ld when XIP is turned off.
- Support for enabling XIP on apollo_lake SOC removed, there's
no use-case.
- acrn and gpmrb boards have flash and XIP related definitions
removed.
- qemu_x86 has a fake flash region added, immediately after system
RAM, for use when XIP is enabled. This used to be in the ia32 SOC.
However, the default for qemu_x86 is to now have XIP disabled.
- Fixed tests/kernel/xip to run by default on boards that enable
XIP by default, plus an additional test to exercise XIP on
qemu_x86 (which supports it but has XIP switched off by default)
The overall effect of this patch is to:
- Remove XIP configuration for SOC/boards where it does not make
any sense to have it
- Support testing XIP on qemu_x86 via tests/kernel/xip, but leave
it off by default for other tests, to ensure it doesn't bit-rot
and that the system works in both scenarios.
- XIP remains an available feature for boards that need it.
Fixes: #18956
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update a number of boards that have arduino_gpio and arduino_i2c
support in their dts files to show that they support that in the
board.yaml file. This allows coverage on several shield tests that
utilize the tags 'arduino_gpio' and 'arduino_i2c'.
Exlucde stm32mp157c_dk2 from some of the samples right now since the
connector on the board doesn't support A2/A3. Also remove the duplicate
of exluding disco_l475_iot1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for the NXP FRDM-K82F development board. This board
features an NXP MK82FN256VLL15 CPU, a user RGB LED and two buttons,
two 32 Mb QSPI flashes, Arduino R3 compatible headers, and a FlexIO
header.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Since lpuart4 is enabled by default on mimxrt1015_evk but not configured
in the device tree, this leads to a build error after adding the
instance to the lpuart driver. Adjust the mimxrt1015_evk to be the same
as other mimxrt evk boards and enable the lpuart only if BT_UART is
enabled.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
This patch is to add support for the Pico-Pi board which has an i.MX7D
Dual SoC.
The Zephyr is running on the Cortex M4 core and the following features
were validated on this board:
* UART: Zephyr console
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
- dts updated for UART1/2
- Additional check added to _INIT macro to configure flow control mode
- Additional check added to _INIT macro to set CTS/RTS gpios values
- Additional check added for gpio config
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
- Fixes#3981
- Implement UART Polling functions
- Implement UART Interrupt APIs
- Remove dependency on esp32_rom_uart_xxx functions
- Update Device tree with UART addresses and pin config
- Update ESP32 UART KConfig
Notes about implementation:
- Interrupts now defined as a local macros, and should be removed
later on, when interrupts for esp32 are supported in dts
- Threshold interrupts are used for TX/RX
- Reseting FIFOs using _RST bit will corrupt FIFO of UART2 when used for
UART1 and vice-versa, so a generic way is used for all three UARTs
- Old Silicon rev is not supported
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
As a precursor to the new GPIO API in which GPIO_DIR_OUT isn't a dts
flag move setting of GPIO_DIR_OUT from the dts to explicitly in the
code. We remove setting the flag in intel_s1000_crb.dts as part of this
cleanup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We should use OpenOCD from the latest Zephyr SDK as opposed to using TI
OpenOCD.
There is a known issue with the current release (0.10.2) of the SDK in
how it resets the network processor, but we can deal with it
subsequently.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Moved arduino_spi to spi2
Set sck-pin in arduino_spi correctly as pin 25
Moved disabled spi0 miso pin assignment to pin 28
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
Promote a handy and often-overlooked sys.exit() feature: Passing it a
string (or any other non-int object) prints it to stderr and exits with
status 1.
See the documentation at
https://docs.python.org/3/library/sys.html#sys.exit.
This indirectly prints some errors to stderr that previously went to
stdout.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Simplify two loops in create_memread_cmd() by looping over elements
instead of indices, to fix two pylint warnings.
Fixing warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix pylint warnings like these:
Comparison to True should be just 'expr' (singleton-comparison)
Comparison to False should be 'not expr' (singleton-comparison)
I checked that GPIO.read() only returns True/False in the
python-periphery docs.
Getting rid of pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Doesn't use 'self'. Fixes this pylint warning:
boards/xtensa/intel_s1000_crb/support/messenger.py:50:4: R0201:
Method could be a function (no-self-use)
If this function is meant to be internal to messenger.py, then a better
option than @staticmethod might be to turn it into a regular function.
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reported by pylint's 'bad-whitespace' warning.
Not gonna enable this warning in the CI check, because it flags stuff
like deliberately aligning assignments and gets too cultish. Just a
cleanup pass.
For whatever reason, the common convention in Python is to skip spaces
around '=' when passing keyword arguments and giving default arguments:
f(x=3, y=4)
def f(x, y=8):
...
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
