We get the following warning when building nrf52810_pca10040:
Warning (avoid_unnecessary_addr_size): unnecessary
#address-cells/#size-cells without "ranges" or child
"reg" property in /buttons
Remove #address-cells/#size-cells since they aren't needed for gpio_keys
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When we fixed the missing reg property in the cpu node, we forgot to
add #address-cells & #size-cells for the node.
This fix the following warnings we get:
Warning (reg_format): "reg" property in /cpus/cpu@0 has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get the following warning when building nrf52810_pca10040:
Warning (avoid_unnecessary_addr_size): unnecessary
#address-cells/#size-cells without "ranges" or child
"reg" property in /gpio_keys
Remove #address-cells/#size-cells since they aren't needed for gpio_keys
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get several warnings of the form:
Warning (unit_address_vs_reg): /flash: node has a reg or ranges
property, but no unit name
or
Warning (unit_address_vs_reg): /memory: node has a reg or ranges
property, but no unit name
Fix by adding unit address that is missing to flash & memory nodes.
Additionally the Silabs memory nodes didn't have a compatiable or
device_type, so add those properties as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get several warnings of the form:
Warning (unit_address_vs_reg): /cpus/cpu@0: node has a
unit name, but no reg property
Fix by adding reg property to missing cpu nodes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get several warnings of the form:
Warning (unit_address_vs_reg): /gpio_keys/joystick@0:
node has a unit name, but no reg property
Fix by dropping the unit address and renaming the node names to include
more information about the gpio_key.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update all supported features and peripherals in the official set of
boards from Nordic Semiconductor.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_NRF51822_QFAA
CONFIG_SOC_NRF51822_QFAB
CONFIG_SOC_NRF51822_QFAC
CONFIG_SOC_NRF52810_QFAA
CONFIG_SOC_NRF52832_QFAA
CONFIG_SOC_NRF52832_CIAA
CONFIG_SOC_NRF52832_QFAB
CONFIG_SOC_NRF52840_QIAA
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_PART_NUMBER_SAME70*
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have a common DT_SIZE_K macro use it instead of defining
__SIZE_K eveywhere. We also have DT_SIZE_M, so use that in a few
places as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_PART_NUMBER_EFM32WG990F256
CONFIG_SOC_PART_NUMBER_EFR32FG1P133F256GM48
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_CC3220SF
CONFIG_SOC_MSP432P401R
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
The LEDs, buttons and necessary aliases are now configured via dts.
This commit breaks the samples under boards/nrf52/mesh:
- onoff-app
- onoff_level_lighting_vnd_app
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The LEDs, buttons and necessary aliases are now configured via dts.
This commit breaks the sample under samples/boards/nrf52/power_mgr.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This patch adds USB capabilities to the stm32f4 discovery board.
As the board has a MicroUSB port that I would like to use as stdout I
just added USB. The needed entry within pinmux.c is already there but
USB was missing in the dts file and documentation.
I tested it with the upcomming commit.
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
This change adds DTS definition of SPI device for nRF chips.
It also removes SPI pin configuration from Kconfig and moves it to
chip DTS.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
When I2C and SPI are not used (such as when building a simple
bootloader for this target), the current Kconfig is generating a fair
bit of warning spew. Clean it up by moving some explicit _defconfig
settings into defaults.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The version of OpenOCD provided by Zephyr SDK is too old and does not
contain support for EFR32FG1P chip. This patch assumes that user
compiles and installs the newest version of OpenOCD.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This config is only valid for kinetis boards. Fixes the Kconfig warning:
warning: the choice symbol OSC_EXTERNAL (defined at
arch/arm/soc/nxp_kinetis/Kconfig:53) was selected (set =y), but no
symbol ended up as the choice selection.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The LPCXpresso54114 command line example was using a wrong board
name which has been renamed after adding the support for the
Cortex-M0+ core.
Fixes#9649
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
This adds to the adc_api test board-specific configurations
for the following boards:
- nrf51_pca10028
- nrf52_pca10040
- nrf52840_pca10056
"adc" is indicated as supported in the yaml files for these boards
so that they are included in sanitycheck.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
ADC nodes are enabled in DTS for the following nRF development kits:
- nrf51_pca10028
- nrf52_pca10040
- nrf52_pca20020
- nrf52810_pca10040
- nrf52840_pca10056
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use Kconfig specific object "named choices".
Aim is to allow to define config choices selection in Kconfig.*
files instead of _defconfig and hence allow to keep flags
activation conditional.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Now that the corresponding flash definitions have been added to the DTS,
it's possible to enable the nvs sample in the NUCLEO-L432KC board.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds DT description of generic storage flash partition using
the last 16kB of flash when CONFIG_FS_FLASH_STORAGE_PARTITION is
defined. This can be used for FCB or NVS filesystems.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the correct pyOCD target type for the NRF52840.
This fixes b92436a13f.
Tested with: Atmel ICE Debugger
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Removes the platform whitelist, leaving just the depends_on/supported
pattern to select which platforms the sample can run on.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for using non-jlink programmers through pyOCD.
Tested with: Atmel ICE Debugger
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add support for using non-jlink programmers through pyOCD.
Tested with: Atmel ICE Debugger
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This patch is to add support for the WaRP7 board which has an i.MX7
Solo SoC.
The Zephyr is running on the Cortex M4 core and the following features
were validated on this board:
* GPIO: User Switch detection and sensors interrupt
* UART: Zephyr console
* I2C: Communication with fxos8700 and fxas21002 sensors
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
PR #8729 removed the old GPIO_NRF5 driver in favor of an
nrfx-based one. The reel_board still references the old one,
causing CI failures.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As reported in issue #9494, BT samples are using the off-chip
UART-based BT controller on 52810. But the on-chip BT controller is
supported on 52810, so this is the reasonable default when BT is
enabled.
This patch enables BT_CTLR by default when BT is enabled.
This resolves#9494.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
