The original exception handling has space to optimize and
and some bugs need to be fixed.
* define NANO_ESF
* add the definition of NANO_ESF which is an irq_stack_frame
* add the corresponding codes in exception entry and handler
* remove _default_esf
* implement the _ARCH_EXCEPT
* use trap exception to raise exception by kernel
* add corresponding trap exception entry
* add _do_kernel_oops to handle the exception raised by
_ARCH_EXCEPT.
* add the thread context switch in exception return
* case: kernel oops may raise thread context switch
* case: some tests will re-implement SysFatalHandler to raise
thread context switch.
* as the exception and isr are handled in kernel isr stack, so
the thread context switch must be in the return of exception/isr
, and the exception handler must return, should not be decorated
with FUNC_NORETURN
* for arc, _is_in_isr should consider the case of exception
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This patch changes the ARM system calls to use registers for passing
or arguments. This removes the possibility of stack issues when
callers do not adhere to the AAPCS.
Fixes#6802
Signed-off-by: Andy Gross <andy.gross@linaro.org>
During the transition of privilege levels while performing syscalls,
the ARM documentation recommends flushing the pipeline to avoid
pre-fetched instructions from being executed with the previous
privilege level.
The manual says:
4.16 CONTROL register
(...) after programming the CONTROL register, an ISB instruction
should be used.
(...) This is not implemented in the Cortex M0 processor.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The TRNG IP block in the KW41Z is really an entropy source and not
intended to be used as a general purpose random number generator
source. The block has 15 slots to read from and when the last slot
is read it has to regenerate the 15 numbers. This process takes
3-5 seconds and is blocking. The change here is to use the TRNG as
an entropy source to the XOROSHIRO pseudo random number function
and then have the KW41Z use XOROSHIRO for random number generation.
Signed-off-by: David Leach <david.leach@nxp.com>
- Removed OT_PLAT_RADIO_DEVICE_NAME
- Changed OpenThread binding to use NET_AP_IEEE802154_DEV_NAME
- Modified Kconfig chain to ensure NET_AP_IEEE802154_DEV_NAME
is enabled for both native 802.15.4 and OpenThread configurations
- Changed default setting of NET_L2_IEEE802154 in defconfig for mkw41z4.
- Fixed OpenThread api support code to use the state of mIsCcaEnabled
in the transmit frame to conditionally invoke radio_api->cc() on
transmits.
Signed-off-by: David Leach <david.leach@nxp.com>
The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual
Cortex A7 core and Single Cortex M4 core.
Zephyr was ported to run on the M4 core. In a later release, it will
also communicate with the A7 core (running Linux) via RPmsg.
The low level drivers come from NXP FreeRTOS BSP and are located at
ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README
The A7 core is responsible to load the M4 binary application into the
RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer,
and get the M4 out of reset.
The A7 can perform these steps at bootloader level after the Linux
system has booted.
The M4 can use up to 5 different RAMs. These are the memory mapping for
A7 and M4:
+---------------+-----------------+---------------------------+
| Memory Name | Start Address | Size |
+===============+=================+===========================+
| TCML | 0x007F8000 | 32KB |
+---------------+-----------------+---------------------------+
| TCMU | 0x20000000 | 32KB |
+---------------+-----------------+---------------------------+
| OCRAM_S | 0x20180000 | 32KB |
+---------------+-----------------+---------------------------+
| OCRAM | 0x00900000 | 128KB |
+---------------+-----------------+---------------------------+
| DDR | 0x10000000 | 256MB |
+---------------+-----------------+---------------------------+
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
All boards based on STM32 should use dts for I2C and SPI.
Move CONFIG flags selection from boards to arch and select them
for all STM32 SoCs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
srd bits start at bit 8, not bit 5.
To date we are not using sub-regions so this problem was
undetected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Ports F and G are not present on some STM32L0 parts, so
for these parts port H external interrupt should be enabled
by writing value 0x5 instead of 0x7 to SYSCFG_EXTICRn registers
(see e.g. RM0367, 10.2.4).
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Removing ${} variable evaluation fixes the issue.
For sam4s_xplained:
Before:
/repos/zephyr/samples/hello_world/build$ make VERBOSE=1 | grep march
/repos/zephyr/samples/hello_world/build$
After:
/repos/zephyr/samples/hello_world/build$ make VERBOSE=1 | grep march
...
-mthumb -mcpu=cortex-m4 -march=armv7e-m
...
Signed-off-by: Paolo Teti <paolo.teti@gmail.com>
QMSI is not updated to latest SPI API. Switching to native DW driver,
until we find a way either to update the shim drivers in a
non-performant way, or updating QMSI itself enabling support for
scatter-gather type of buffers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This file never existed.
'source' currently ignores missing files instead of throwing an error,
due to Zephyr's custom globbing logic.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Selecting a choice symbol is always a no-op, and the latest version of
Kconfiglib prints a warning. This commit removes all selects of choice
symbols, which might make the Kconfig files a bit clearer and gets rid
of the warnings.
This is just a dumb removal. I did not try to guess the intent of each
select.
Fixes#6849
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Add support for getting some basic params from the DTS for the UART.
The ns16550 driver still needs to be updated to get IRQ and address
info from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all ARC SoCs we can remove code associated with !HAS_DTS and
select HAS_DTS at the architecture level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial device tree support for the em{7,9,11}d SoC and associated
em_starterkit boards. The device tree at this point specifies cpu core,
memory, interrupt controller, uart's and i2c controllers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that dts i2 qmsi ss nodes generate the right options, let's use
them. Apply the relevant fixup on the targeted SoC.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Applying the change to relevant arch/boards, either in their Kconfig or
the dts specific files.
Taking the opportunity in dw driver to rename the variable the same way
as they are everywhere else in the code (s/dev/dw and s/port/dev) in
init function.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move driver specific to dedicated file when relevant (i.e.: more than
1-2 options), use if/endif also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A previous commit had mistakenly overwritten the copyright years instead
of extending the range. Fix this mistake so that the proper range is
recorded.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The existing nrf5_common.h now applies to other Nordic ICs that are not
part of the "5" family. Instead rename this to nrf_common.h to cover the
upcoming ICs that belong to other families.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use HAS_ Kconfig option as intended, those are invisible option that
signify support of a certain feature that can be selected by a hardware
or platform.
For RTT and system view this was not dont in an inconsistent way.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
STM32F0 flash driver already uses FLASH_PAGE_SIZE from HAL
in flash layout part, so CONFIG_FLASH_PAGE_SIZE is redundant
and confusing.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
The xtensa asm2 layer had a function to select the next switch handle
to return into following an exception. There is no arch-specific code
there, it's just scheduler logic. Move it to the scheduler where it
belongs.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was previously just a #define in one header file, but we need
this expressed in Kconfig space in case some feature only works
properly with downward-growing stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we enable CONFIG_DEBUG_INFO, then we need to fixup the stack
on thread entry so that the EFLAGS value in the EBP slot doesn't
confuse the debugger or any runtime stack unwinding code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The DCCM_SIZE is defined in terms of K, not bytes, so we need to adjust
it from bytes (generated from dts) to K (used by e CONFIG_DCCM_SIZE).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the dts.fixup back to board dir in prep for support mps2_an521.
The memory maps between the two mps2_an385 and mps2_an521 differ greatly
so its easier to just keep the fixup files with the board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
