Instead of finding the address of the spurious irq function in the
intList section we now rely on the linker to find the address in the
_irq_spurious symbol.
This is a migration from using code generation to using the C language
which we in the general case we should aways strive towards.
In this specific case it makes the generated code 'irq_tables.c'
easier to read as we replace magic numbers with the &_irq_spurious
token.
Also, the path through the build system that _irq_spurious makes is
much shorter, so it is much easier for a user to understand how it is
used.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Duplicate the CMSIS MPU-related macro definitions specifically
for Beetle SOC which is is not compliant with ARM CMSIS and
does not include the ARM CMSIS headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_RASR register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_RBAR register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_CTRL register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Configuration parameter SOC_SERIES_NRF52X is common for all NRF5X SoCs.
Due to that it cannot select: CPU_HAS_FPU because not all Nordic
microcontrollers supports that. Selection of this parameter was moved
to configuration of each SoC in Kconfig.soc file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Created NRF5x peripheral list that can be used to describe each
NRF5x SoC. Basing on this description Kconfig file can display
and allow to configure only these drivers that are available
for particular SoC.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Replace code that handles erratas and performs other SoC-specific
initialization, that was actually copied from SystemInit() provided
in MDK for particular SoCs, with a call to SystemInit().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
The various STM32 reference manuals sometimes define the USB endpoints
as IN or OUT only and sometimes as bidirectional, even in the same
manual. This is likely because the OTG implementation has one set of
registers for the IN endpoints and one other set for OUT endpoints.
However at the end a given endpoint address can both transmit and
receive data.
This causes some confusion how to declare the endpoints in the device
tree, and depending on the SoC, they are either the same number of IN
and OUT endpoints declared, or they are declared as bidirectional. At
the end it doesn't really matter given how the driver uses those values:
#define NUM_IN_EP (CONFIG_USB_NUM_BIDIR_ENDPOINTS + \
CONFIG_USB_NUM_IN_ENDPOINTS)
#define NUM_OUT_EP (CONFIG_USB_NUM_BIDIR_ENDPOINTS + \
CONFIG_USB_NUM_OUT_ENDPOINTS)
#define NUM_BIDIR_EP NUM_OUT_EP
This patch therefore cleanup the driver, the DTS, and the DTS fixups to
only define the number of bidirectional endpoints.
In addition to the cleanup, that fixes a regression introduced by commit
52eacf16a2 ("driver: usb: add check for endpoint capabilities"), which
introduced a wrong check for SoC only defining the number of
bidirectional endpoints.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit enables CAN on the STM32L432.
Tested on nucleo l432ck with external transceiver and loopback mode.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The prepended 0x causes DTC warnings and shouldn't be there.
Tested by compiling hello_world for nrf52840_pca10056 before and after.
Fixes#8334.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
This commit contributes the definition and the implementation
of an API for ARM MCUs to configure and get the configuration
of the security state targeted by a given external IRQ line.
The API is only available in Secure ARM Firmware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Declare and implement convenience wrappers to evaluate Non-Secure
read and write permissions of C variables using the cmse address
range intrinsics.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the CMSE
address range permission checks based on the ARMv8-M
address range check intrinsics exlusicely for Secure state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Refactor arm_cmse_mpu_region_get(.) function, so its signature,
documentation, and implementation align with the rest of functions
for obtaining MPU, SAU and IDAU region numbers via the TT instruction.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines and implements an internal ARMv8-M API
that allows the user to evaluate access permissions of memory
locations, based on the ARMv8-M Tests Target (TT, TTA)
instruction support (for Secure requests).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces additional dependencies and selection
scheme for CPU_CORTEX_M_HAS_SPLIM, for Zephyr Non-Secure builds
on ARMv8-M MCUs with Security Extensions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the ARMV8_M_SE K-config option
to signify the use of an ARMv8-M MCU with support for
Security Extensions. It also introduces dependences of
ARM_(NON)SECURE_FIRMWARE on ARMV8_M_SE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the K-config option
ARM_NONSECURE_FIRMWARE, to indicate a Zephyr firmware image
that is intended to execute in Non-Secure state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the help text description for K-config
option: ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
lib/libc/minimal/source/CMakeLists.txt and
lib/libc/minimal/source/stdout/CMakeLists.txt was introduced in
12f8f7616 but it is not used by the build system. CMakeLists.txt in
the parent dir lib/libc/minimal/CMakeLists.txt adds C files to the
target with the lines like:
${CMAKE_CURRENT_SOURCE_DIR}/source/stdlib/atoi.c
${CMAKE_CURRENT_SOURCE_DIR}/source/stdlib/strtol.c
To make other empty CMakeLists.txt explicit, this commit adds a
comment line to them.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
On Cortex-M7 CPU (at least on STM32F723), the dummy move FPU instruction
is executed before the FPU lazy state preservation is disabled. Add an
instruction synchronization barrier before it to avoid that.
At the same time, remove the data synchronization barrier after the
dummy move as it does not have any effect on RAM or registers.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds basic support for declaring gpio nodes in dts for nrf52.
The dts.fixup provides mapping for the generated defines to the config
defines currently used by the nrf gpio driver.
Existing boards that use nrf52 are updated.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
The extra region is wrapped in an "ifdef" as two MPU regions are used
only if the total memory size is not a power of two.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no need for two RAM regions when the total amount of memory is
a power of two. With this change it will be possible to map the whole
memory and save one MPU region for such cases.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This symbol was removed by commit 17c6456678 ("drivers/uart: Use dts
to set uart priorities for QMSI driver"). The setting should come from
DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The NSIM symbol was removed in commit 9bc69a46fa ("boards: Update arc
em_starterkit support from 2.2 to 2.3").
Guess that UART_NSIM should be used here now, similar to what was done
in commit 45221a9706 ("serial: nsim: Fix impossible-to-enable
CONFIG_UART_NSIM").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added a hidden Kconfig option in arch/arm/soc/nordic_nrf
which is selected by selecting DC/DC circuitry being present
in the board.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since they are not used anymore because can be replaced
by CMSIS definition or generated from device tree,
remove IRQ definition file soc_irq.h
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit sets VECTOR_ADDRESS in prep_c.c directly to the
value of _vector_start for XIP images for MCUs which have the
VTOR register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Replace all register defines and calls with Nordic nrfx HAL.
Simplification of uart shim - assumed only one uart instance.
Added parity bit to configuration options.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add fixup info for PWM nodes on STM32F0/F1/F3/F4/L4 and remove the
conflicting Kconfig symbols to fully switch STM32 PWM to device tree.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The PendSV handler sits below the priority of other OS interrupts, but
it was inspecting kernel state before masking those interrupts out!
Move the locking to the top.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit removes the arm_mpu_enabled status flag in the ARM
MPU driver. This flag is not needed, because the value of the
MPU_CTRL register stays the same while the MPU is enabled, and
is cleared to 0 when the MPU is disabled. Therefore, we do not
need to prevent from having the enable or the disable operation
to be called multiple times.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In _arm_mpu_config provide a more detailed description of the
effect of MPU PRIVDEFENA flag when enabling the ARM MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM Cortex-M0+, M3, and M4 MCUs have a fixed number of 8 MPU
regions, if MPU support is implemented. Therefore, we can
implement _get_num_regions() to return a constant, if CPU
is one of the above Cortex variants. _get_num_regions() is
invoked often in the code, so this solution increases processing
efficiency. A sanity check is implemented in arm_mpu_init(), to
ASSERT if the number of regions provided by hardware does not
match the expected (default) value.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commits adds a dependency for ARM_MPU on !CPU_CORTEX_M0,
so an accidental selection or ARM_MPU in ARM Cortex-M0 MCUs
will signal a K-config warning.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
IRQ priorities for CAVS and DW were previously defined in Kconfig.
They are now defined via DTS and removed from Kconfig.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Considering the case of call of printk, interrupt and
other cases, adjust the privileged stack size of arc to
384 bytes to avoid the the overflow of privileged stack.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* re-use top of isr stack as exception stack
* bug fixes in irq offload's implementation
* improve kernel oops implementation
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit improves the reset of arc:
* make the processor in the correct status
* clear interrupt related regs
this may improve or fix#6515
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Whether it should hang the system it not decided finally.
But remove it here to let some tests pass.
Fixes#8032
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
