Instead of waiting forever for the SPI transfer to complete, let's use
a timeout value and bail out if elapsed. The timeout value logic is,
xfer_len/frequency + tolerance
Tolerance value can be modified using a Kconfig symbol,
CONFIG_SPI_COMPLETION_TIMEOUT_TOLERANCE. It defaults to 200ms.
Fixes: #33192
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
hal_espressif repository was updated from esp-idf v4.2
to esp-idf v4.3 to allow latest Espressif chips integration.
As a consequence, it added a few changes in drivers
and peripherals. To maintain bisectability, changes in this
PR cannot be split. Here are some details:
wifi: update linker script by adding libphy and new attributes.
spi: update some APIs and fixed missing wait_idle check
west.yml: esp32: update hal to new version
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit reverted while loop on tx only.
This commit solves SPI loopback failure and SPI wrong behaviour on RX.
fix:
* zephyrproject-rtos/zephyr#35297
* zephyrproject-rtos/zephyr#35539
Revert "drivers/spi: STM32: This solves SPI infinite loop on Tranceive"
This reverts commit 50c2acbc03e7a48a09880b6fcb8c22256bffa70c.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
This commit loops on rx not empty only if rx_buf is enabled.
And if rx_buf is not enabled, it loops on tx empty status.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This patch fixes a bug of SPI driver for SiFive FE310.
Current implementation sends/receives only first buffer even if
an user passed two or more struct spi_buf to driver.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Limit the maximum SPI frequency to that supported by the instance
hardware. This stops peripherals supporting >8MHz on slow instances
from wrapping around on the clock frequency for undefined behaviour.
Fixes#34402
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move emul.h out of the top level include/ dir into
include/drivers/emul.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove SPI_[0-8] and SPI_[0-8]_OP_MODES Kconfig symbols as no driver
uses them anymore. We also cleanup board and sample code to remove
use of these symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can utilize the devicetree macros to determine which instances to
enable. This will allow us to phase out the per instance Kconfig
symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Nothing sets the op mode to anything but master. For now default the
mode to master-only and we can determine a devicetree property in the
future if we need to support other configurations.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace Kconfig symbols SPI_DW_PORT_n_INTERRUPT_SINGLE_LINE with just
seeing how many IRQs are defined in the devicetree to determine single
or multiline interrupt support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SoC that utilized the clock support isn't supported in Zephyr
anymore and there are no users of this code. Remove it for now as it
should get converted to utilize devicetree if needed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We will need this to be able to DEVICE_DT_GET() bus devices from
tests/drivers/build_all in an upcoming commit.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove conditionals (PM_DEEP_SLEEP_STATES and PM_SLEEP_STATES) from
power management code. Now these features are always available when
power management is enabled.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The cc13xx_cc26xx driver uses "inst" so we need to use
DEVICE_DT_INST_DEFINE instead of DEVICE_DT_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The spi_nrfx_spis driver uses nodelabel so we need to use
DEVICE_DT_DEFINE instead of DEVICE_DT_INST_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the devicetree node as the source of object name and other
information used when defining the device structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Change to spi_context_lock missed one spot in the flexcomm driver and
this causes a build issue. Pass spi_cfg to spi_context_lock to fix
the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On the STM32MP1 and STM32H7 Series SoC, if slave select pin control by
software on master mode operation, the SS input/output polarity (SSIOP)
should be set to high level avoid the mode fault (MODF) error.
Signed-off-by: Harry Jiang <explora26@gmail.com>
Keep locking for SPI_LOCK_ON from the first call of transceive until
spi_release release the lock. Use owner parameter to in the spi_context
to store the owner of the lock.
The locking is in line with the SPI_HOLD_ON_CS
Signed-off-by: Stefan Bigler <stefan@bigler.io>
