Hopefully, this is the very last time a nanokernel object will have been
referred to by the 'channel' terminology.
Change-Id: Ied6243220803492af174571bfed328da007f2c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Make these public:
- SECONDS(x): macro that gives the number of ticks in x seconds
- MSEC(x): macro that gives the number of ticks in x milliseconds
- MSEC_PER_SEC: number of milliseconds per second
- USEC_PER_MSEC: number of microseconds per millisecond
Change-Id: Ic5dbf9349651a477b066edb0c6b6721da2b7e5bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Somewhat useful utility that should only have one implementation, so it
can impede on the normally-available application namespace.
Change-Id: I085850177c231fdf58634f97e897c4d2e1a5cffb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
k_proc was a legacy leftover that does not make any sense, since there
is no concept of a "process" in the system. Rather, that data structure
refers to a 'task control block', i.e. the representation of a task
execution context from the microkernel's point-of-view (not to confuse
with the 'struct ccs', the representation of a thread execution context,
from the nanokernel's point-of-view).
Change-Id: Ic29db565af023be629ce740bbcb652ece7dc359f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When compiling with optimization level 0 (-O0), the linker complains
about missing references to uart functions. This is due to compiler
treating this functions as extern, since -O0 disables function inlining,
as described in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=49653
So change the declaration to static inline.
Change-Id: I5963153dc1efd22083b6b91ae2b70c11d602c6c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When compiling with optimization level 0 (-O0), the linker complains
about missing references to uart functions. This is due to compiler
treating this functions as extern, since -O0 disables function inlining,
as described in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=49653
So change the declaration to static inline.
Change-Id: I59607cffbd1cae141a9eeaca699549ebf8203061
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This converts away from camel case according to the coding style.
Also, the file description has been made into doxygen style.
Change-Id: Ib4dd85a4a96e4e87279c92fa243d3f860ebe63f2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Converts the file description to doxygen format, and updates
the information inside. Also removes empty lines, updates
the comments for function, and adds missing comments.
Change-Id: I7610e8667cd85feb0c4c853b44880f7e29b6c05a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Clean up variables and function arguments to conform to coding
style. Also align the function argument list.
Note that this only changes the parts related to UART.
Change-Id: I84a6ba88963784f6ddc77d5bda653a7d2de6a72b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The files idtEnt.h and segselect.h in shared are linked from
the source tree for no good reason adding and extra top level
directory that might be confusing.
The shared/ here means shared between host and target, this is
not longer necessary in our build system.
Change-Id: Id9665e10de7a1d290888d9069be3db9f4330d284
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is the final step to convert serial to the new driver model.
The dev->driver_api is now being used by individual drivers.
As a side effect, it is now possible to build multiple serial
drivers in the final image (though it won't make much sense).
Change-Id: I5d864e6503a5431b29006c311320155adf81cf5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this, the UART console has its own initialization which is not
dependent on UART init routines.
This will allow the app to utilize all UARTs for other purposes,
instead of always reserving one for console. Future patch
will enable this choice.
Note that the console init is effectively demoted to pure_init
from pure_early_init. The UART console depends on UART being
initialized, but there is no deferred init at this point.
So this initializes the console a bit later than UARTs,
simply to make sure the UART is initialized before using it.
Once there is a mechanism for some type of deferred initialization,
the UART console init can be promoted back to pure_early.
Change-Id: Iba95197b13384cb1a46e34c78638348b7a0bec8c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This restructures the device structs and now utilizes the new
driver initialization model. This is another step towards
converting the serial driver to the new driver model.
Note that the serial driver does not initialize the hardware
unless it is being used by another driver. The configuration
of the serial port needs to be done by the driver utilizing
the port (e.g. baud rate, interrupt priority, etc.).
Therefore, some serial ports are declared but not exactly
configured.
Also note that the UART console is being initialized at
the same time as the serial port. This will be removed
in future patch, so the UART console driver will do
its own initialization.
Change-Id: Idd89954b2d0649a557ba8c869ee96512fec898e4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Highlight the fact that find_[lsb|msb]_set operate on a 32-bit word.
Change-Id: I24cee7709ea6497508dbc7f96a7b4d74fa4bc257
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The new names reflect better what the functions do: they find the first
bit set starting from the least or most significant bit, i.e. they find
the least or most significant bit set, in a 32-bit word.
Change-Id: I6f0ee4b543f6f37c2f08f7067e14e039c92a6f6a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The inline versions are renamed to remove the _inline suffix, and the
non-inline versions are removed from the code base.
Change-Id: Iee2e6adcfb5da1fe0a978a05aa854e10ae82a8b8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add support for signed write with sign parameter for write without
response.
Change-Id: I79008532d88b10d34db1f68898ad4258dd3e761b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The tinydtls.h include file was missing from earlier tinydtls
commits.
Change-Id: I8b8398313c7f598daf81f4fb8c07fd138e22e22d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds validation for passed callbacks. Previously registered
callbacks need to be explicitly unregistered by passing NULL.
It is no longer possible to implicitly overwrite callback
structure.
Input Output Capabilities generation is factored out to separate
function. This is in preparation for adding more callbacks.
Change-Id: Ie809ea2daa80f9c54585efb459b49af1107007d3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register agent with display capability resulting
in DisplayOnly InputOuput Capability being used.
Change-Id: I98931af35c51a71882b60303c0f5d4da19eefbc4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For now this is used only in conn.h. Allows to reduce includes
dependencies.
Change-Id: I60dbe588e711fa0332049cbea43ffb6838a58823
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Documenting the function that returns the used UDP connection
pointer. This function is needed for example in tinyDTLS
server implementation.
Change-Id: I08aae798dab0749912694d6338de91dcbd13df84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add NET_BUF_IP() and NET_BUF_UDP() macros that return
correct struct containing either IP or UDP data.
Change-Id: I43b828ef78c1f13ccee41e6a60daa36145a35eba
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This split the use of ATT Write Command and ATT Write Request since with
the former it is possible to sign the data thus making combinations of
parameters in bt_gatt_write complex/confusing.
Change-Id: I0349acd16d22ea4e38ac3e5ad8c3cdc318851633
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixed the description of what happens if there is a timeout.
Change-Id: Id19a791193b527a8ee086f069e103f42d2d9b0f4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not touch uip_len(buf) value as Contiki IP stack
will use it to determine what it should do with the
received packet. So after we have received the packet,
we update separate datalen variable in net_buf that will
store the correct length of the packet.
Change-Id: Iab79b741508e95e581d1727645e6b1d1eacded4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to specify a timeout in ticks while waiting
network data. The timeout value has following meaning:
TICKS_UNLIMITED wait forever
TICKS_NONE do not wait
value > 0 timeout value (only applicaple if
CONFIG_NANO_TIMEOUTS is defined)
Change-Id: Icbb33fa0eeb462659d4006dd9d948a04f39a87a9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending data to network, make sure to check the return
code from network driver. The driver should return these codes:
0 : If packet could not be sent. In this case buf should
not be released.
1 : If the packet was sent successfully. In this case the buf
should be released by either the send() or some other
lower layer function.
<0: If there is an error, the buf should not be released by
send() function.
Fixed the relevant part in Contiki code so that the tcpip_output()
return correct value
0 = packet was not sent, caller needs to free it
1 = packet was sent, network driver will free the net_buf
after sending it to medium
Change-Id: I4380d7747985fc057f5ef73ca97b76f6e9888a55
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables writing from offset using Prepare Write + Execute Write
procedures including Long Write procedure when the data is bigger than
the MTU.
Change-Id: Id35d66c011ba582a4ba92ffe75444226e479335a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The inline versions are renamed to remove the _inline suffix, and the
non-inline versions are removed from the code base.
Change-Id: I7314b96c42835f15df4c537ec11ab7961d4ee60f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They use the same logic and _k_server handler, so only have one
implementation of the user-facing API.
Instead of using ENDLIST, create a new internal _USE_CURRENT_SEM symbol
that reflects what the implementation is doing.
Change-Id: I5c50efd15f4e97b778b4b5efd5ec931384a8631f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These macros have C language-isms and cannot be used from assembly code.
Change-Id: I07ffc27411300339e08ae7ef9c19249903be4774
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the context switch profile point for x86 and ARM arquitectures.
Change-Id: Ib7205059104ed47b96ba75b8cfefec3ff35f6813
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a standardized mechanism to add profiling points to the Kernel
with a single interface for the user to collect the profiling data.
Change-Id: I4fa34ac1b42f73a73ba1fd805e755ee2fd00dff7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a log event tool with a single interface for the user to
add/collect the event log data.
Change-Id: Ia4b78836748c5d7e44ba1bdd50c28434e8a55d65
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some arches this is an unsigned int, some an unsigned long.
Standardize on unsigned long for all arches.
Change-Id: I1661ea2d895915c0be3eaabdb79d90435f3945b0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix documentation to link to autogenerated API entries.
Change-Id: I0355435c189bff17c4468b1f300dcffcce73e51d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Used to direct the compiler to examine the number and correctness
of arguments based on codes in the format string.
Change-Id: I8e408b3fcd6897a14d30363425f14f81628b3d3f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Extending devices.h to contain values that include error code
values that a driver may need to share. These include things like:
okay, fail, invalid configuration, etc.
Change-Id: Ib3a5e3fdd93ec8115686cf02a75436af31ef6eff
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This enable defining memory maps in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MEM_MAP(mem_map_name, ...). The memory maps created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
memory map APIs.
Define the memory map using:
DEFINE_MEM_MAP(mem_map1, blocks, block_size);
and "mem_map1" can be used, for example:
task_mem_map_alloc(mem_map1, ...);
or,
task_mem_map_free(mem_map1, ...);
etc.
To use the memory map defined in another source file, simply add:
extern const kmemory_map_t mem_map1;
to the desired C or header file.
Change-Id: I9c551b90f9d0a95f961fd8ec1c5278c2ea44312d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_mem_map_list was a static array generated by sysgen,
where it containing all pre-defined memory maps from MDEF file.
To support private memory map objects (aka, defining them within
source files), the list has to accommodate memory maps that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all memory
map pointers go into this section. By doing this, the list
can still be manipulated as an array.
Change-Id: I1f3414b72f685fef4b99850749178661f14d9345
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque memory map object id type is now a pointer to
the associated memory map structure, rather than an index
into the microkernel's array of memory map structures.
This change is a pre-requisite to support for private
memory map objects, which are defined in source code.
Change-Id: I82ecb59eeed00efa54f781f775710c92ff9c9fc9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining pipes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_PIPE(pipe_name, ...). The pipes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
pipe APIs.
Define the pipe using:
DEFINE_PIPE(pipe1, size);
and "pipe1" can be used, for example:
task_pipe_put(pipe1, ...);
or,
task_pipe_get(pipe1, ...);
etc.
To use the pipe defined in another source file, simply add:
extern const kpipe_t pipe1;
to the desired C or header file.
Change-Id: Iae8e04706359bc18aae51acc75df3e3d26388882
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_pipe_list was a static array generated by sysgen,
where it containing all pre-defined pipes from MDEF file.
To support private pipe objects (aka, defining pipes within
source files), the pipe list has to accommodate pipes that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all pipe
pointers go into this section. By doing this, the pipe list
can still be manipulated as an array. The reason behind
putting the pointers to pipe, instead of the pipe objects
themselves, is that some compiler/linker may pad the large pipe
struct. For example, compiling under gcc and march=i686 pads
the struct to 32-byte alignment (march=atom to 64-byte alignment).
This causes issue with sizeof() and pointer arithmetic because
they have no idea about the padding. So use pointers here to
prevent padding.
Change-Id: I6d3b75614c4d8760c037a5c26746410d4e4b17cb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque pipe object id type is now a pointer to
the associated pipe structure, rather than an index
into the microkernel's array of pipe structures.
This change is a pre-requisite to support for private
pipes, which are defined in source code.
This also moves the required struct into more visible
headers such that private pipes can be declared.
Renaming the struct is also being done to conform to
naming convention for private kernel objects.
Since a couple structs have to be moved anyway, so
do the moving and renaming here too (contrary to what
have been done in the past, with separated patches).
Change-Id: Ibb6ec7f62745a81439ae3ea2616688b757439843
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining tasks in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_TASK(task_name). The tasks created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
task APIs.
Define the task using:
DEFINE_TASK(task1, priority, entry_func, stack_size, groups);
and "task1" can be used, for example:
task_start(task1);
or,
task_abort(task1);
etc.
To use the task defined in another source file, simply add:
extern const ktask_t task1;
to the desired C or header file.
Change-Id: Ib2f3572950ca74b359b7fde1ccd6cfd04783eefb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_task_list was a static array generated by sysgen,
where it containing all pre-defined tasks from MDEF file.
To support private task objects (aka, defining tasks within
source files), the task list has to accommodate tasks that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all task
objects go into this section. By doing this, the task list
can still be manipulated as an array, which is required for
task group operation.
Change-Id: I799d6967567079498bc414e0cb809e8af856b53e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque task object id type is now a pointer to
the associated task structure, rather than an index
into the microkernel's array of task structures.
This change is a pre-requisite to support for private
task objects, which are defined in source code.
Change-Id: Idb53ea7f8a8a5b7e6477a74273930b08fc77dcfe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining mailboxes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MAILBOX(mailbox_name). The mailboxes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
mailbox APIs.
Define the mailbox using:
DEFINE_MAILBOX(mailbox1);
and "mailbox1" can be used, for example:
task_mbox_put(mailbox1, &msg);
or,
task_mbox_get(mailbox1, &msg);
etc.
To use the mailbox defined in another source file, simply add:
extern const kmox_t mailbox1;
to the desired C or header file.
Change-Id: I32d4194af740f96fc8df8c6cd3144a0c9accb4ec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private mailbox support.
The struct needs to be moved into more visible header
so private mailboxes can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: Ibd75497e726efd447d27f3bfd0b4695ed1695693
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining FIFOs in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_FIFO(fifo_name). The FIFOs created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
FIFO APIs.
Define the FIFO using:
DEFINE_FIFO(fifo1, depth, width);
and "fifo1" can be used, for example:
task_fifo_put(fifo1);
or,
task_fifo_get(fifo1);
etc.
To use the FIFO defined in another source file, simply add:
extern const kfifo_t fifo1;
to the desired C or header file.
Change-Id: I29667c4cfdcd0e6d189358478acf1a6149ecb826
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private FIFO support.
The struct needs to be moved into more visible header
so private FIFOs can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: I9b90ddccbaf01ff8c7e2ef03c926d0328dd7ec39
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining semaphores in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_SEMAPHORE(semaphore_name). The semaphores created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
semaphore APIs.
Define the semaphore using:
DEFINE_SEMAPHORE(sem1);
and "sem1" can be used, for example:
task_sem_give(sem1);
or,
task_sem_take(sem1);
etc.
To use the semaphore defined in another source file, simply add:
extern const ksem_t sem11;
to the desired C or header file.
Change-Id: Ia9c128648f7a26fc776eeb8f6fcc4158b1712a97
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private semaphore support.
The struct needs to be moved into more visible header
so private semaphores can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: I84ac7d580404ac5e1753c1bd446d38993fd23310
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining mutexes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MUTEX(mutex_name). The mutexes created this way are
the same, in functionality, as those defined in MDEF files.
They can be manipulated by the standard microkernel
mutex APIs.
Sample usage:
DEFINE_MUTEX(mutex1);
void one_function(void)
{
task_mutex_lock_wait(mutex1);
...
task_mutex_unlock(mutex1);
}
To use the mutex defined in another source file, simply add:
extern const kmutex_t mutex1;
to the desired C or header file.
[ DL: This is a slightly modified version of similar patch
by Allan Stephens available at
https://oic-review.01.org/gerrit/3255 ]
Change-Id: Ib9cd8193eaf849a8aad1d217912759324ee8818e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private mutex support.
The struct needs to be moved into more visible header
so private mutexes can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: Ifccb60a837b44e443be0b091c2df4f06373718fe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The footprint-min test cases intentionally turn CONFIG_PRINTK
off to show the minimal footprint. On ARC, printk() is being used
in some core IRQ management code, resulting in a build error.
On other OSes such as Linux, disabling printk() causes any use
of them to compile to nothing rather than generate a build error.
We should do the same here, we shouldn't try to discourage the use
of console logs in the codebase.
Change-Id: Ibbbc044eef715066b3bb9e96b073934320b71aa9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds bitmask to be used for validation of LE features
exchange support.
Change-Id: I96a79f5e5c4fef330933480f9dd5ec567cd9523f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds LE read remote features command and event types.
Change-Id: I3270142379c6f822f6f4be2e720c9cabb5d3df3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The slave may request a change to the connection parameters using
the L2CAP LE signaling channel if either the master or the slave
or both do not support the Connection Parameters Request procedure.
Therefore if local controller doesn't support this, the request
can be made for sure.
Change-Id: I23e70793763693e40dab3bfb6a9634816f5b02b2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This is consistent with the rest of the API since the attribute length
can be at most 512 bytes long.
Change-Id: Ia2e60cf8dadcb93d0d091cda5be1b80de98fae94
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_gatt_unsubscribe which can used to unsubscribe to attribute
value notification using CCC handle.
Change-Id: I8a3b1594787a3322834516d0306a84c8ef7792dd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_subscribe which can used to subscribe to attribute
value notification using CCC handle.
Change-Id: I0983843836b0c2253f750b34b7765dd880cb10a0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Galileo testing uses Linux kexec() feature to load Zephyr OS.
kexec() requires all program headers page size aligned.
Add page size padding to initlevel section in order to make
BSS page aligned.
Change-Id: I7c0e309be70aef45b347b16c6d5c01bdf5659351
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: If38c859338c7cf0de58430336e1046b28f9e9944
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The configuration of SRAM and flash options are no longer hardcoded in the
platform's linker script file, but are instead defined in the platform
configuration file.
Change-Id: I557a8228080d607f6add5f86b9b2509ed3fd31ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It appears more conventional to require callers of function-type
macros to supply the trailing semicolon.
Change-Id: I40c67cf2ec8f7e85bdc9d8a2a29698b56d9715c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fixes the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option dependencies such that
it can be overridden by a modified platform configuration file. This is
particularly important for the LOAPIC timer driver as
SYS_CLOCK_HW_CYCLES_PER_SEC is dependent upon the target's CPU/bus frequency.
Change-Id: I0fb49b4c540888cb1988c76e2a711a85e756f82c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit moves the comments from the nano_sema.c file to the
nanokernel.h file.
Change-Id: Ia1d517da38807d096b349331da72c9c4a81fb44e
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Moves the nanokernel LIFO in-code comments to the .h file. The comments
were changed to the Javadoc Doxygen format. A comment per alias was
created based on the original comment.
Change-Id: Iacd6bf1136ceac439d05669ef51cf28b858b306b
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
All public APIs shall contain the complete documentation including
@return in case the function return something.
Change-Id: I1f16eaf988ace1a3ac760c59eacd71a6a5912df9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_write which can used to write attribute value.
Change-Id: I45a02e6dbf642ed1bcab8234180f2c48a28e2874
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds bt_gatt_read which can used to read attribute values.
Note: Attributes which values are bigger than the MTU need to be read
multiple time until the end since the stack cannot cache any data.
Change-Id: I09c502eeb674a577673182c35a0e1a84519fd3b7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Calling bt_conn_set_auto_conn one can decide if auto connect shall
be used. If so, everytime the connection is lost, passive scanning
will be enabled to listen for connectable advertisements from
remote device and re-establish the connection.
Auto connect can be disabled if one decide to disconnect from
this device using bt_disconnect or call bt_conn_set_auto_conn
with auto_conn flag set to false.
Change-Id: Ic9952e313cb8612ea6c72838be0755805daeffcf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables directly add 16-bit value at the end of operational buffer.
Value is converted to little-endian format before is appended.
Position of buffer's tail is updated during addition.
Usage of bt_buf_add() call enables monitoring available limited room
in the buffer when CONFIG_BLUETOOTH_DEBUG is on.
Change-Id: Id7ac62cd3b11ef03302e94185a7faae747eccb20
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds bt_gatt_discover_descriptors which can used to discover all
descriptors in the given range.
Change-Id: Idf93852ef9d8ba3bfce20dc0b95f4e11aa0dc73d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds above function to stop ongoing advertising.
Change-Id: I16b3913524a61e844a81cbe733f2b8e6072ab442
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Removes a duplicated comment on the FIFO documentation.
Change-Id: Iff81fd0df67e23517c199c866542db28d12cc42a
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
- Lack of some includes
- And bogus function signature
Change-Id: I4d504de83efeaa223c99da3e6fbe69b6e85823ee
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move the comments from k_event.c file to event.h. Only external API information was moved.
Minor changes to adapt comments and parameters.
Change-Id: I05124fc48720105a246826c94f3f21a6e30d6043
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
This commit moves the comments from the k_semaphore.c file to the
semaphore.h and kernel_main.h files.
Change-Id: Ica86945e738f1f61b8ed216981bce55351029645
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
See
https://groups.google.com/forum/#!topic/ia32-abi/cn7TM6J_TIg
for more details.
• Support IA32 without FPU.
• Minimum ISA: Pentium ISA without x87 FPU instructions.
• Don't allow mixing i386 object files with Intel MCU object files.
• Support floating point with software emulation:
a. Long double is the same as double.
b. Use __float80 for 80-bit double.
• Minimize memory footprint:
a. Code size
b. Data size
c. Stack size
Here is the draft of Intel MCU psABI. The differences from IA32
psABI are
1. The minimum instruction set is Intel Pentium ISA minus instructions
for x87 floating point unit.
2. There are no x87 floating point registers.
3. There are no vector registers.
4. Segment registers are optional.
5. Support for TLS relocations are optional.
6. Scalar types larger than 4 bytes are aligned to 4 bytes.
7. There are no vector types.
8. _Decimal32, _Decimal64, and _Decimal128 types are optional.
9. long double type is the same as double.
10. float, double and long double types are passed and returned in
general purpose registers.
11. _Decimal32 and _Decimal64 types are passed in general purpose
registers.
12. Aggregate types no larger than 8 bytes are passed and returned
in general purpose registers.
13. Stack is 4-byte aligned.
14. The auxiliary vector support is optional.
15. Register %edx has undefined value at process entry.
16. New ELF machine code: EM_IAMCU.
17. New predefined C/C++ pre-processor symbols: __iamcu and __iamcu__
Change-Id: I6a0c45ad22d8f710b6f37a041aaa2fc1bf0b1c39
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds documentation to the header files for memory map
adopting javadoc style.
Change-Id: I25ba2b938ea7dc490af97899b4eb10d16351739a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Moves the comments from the k_fifo.c to the fifo.h file. Only the
external API information was moved. Minor edits were performed to adapt
the comments to different parameters and aliases.
Change-Id: I69d2d009f7ec6390e0a2fc9d6a346ddc0111f9f1
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moves the comments of the nanokernel FIFO external APIs from nano_fifo.c
to nanokernel.h.
Change-Id: Ic31e6da8a2f7a4099adc2e847d237b5a73787a23
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Split the pure init level into two phases this allows for easier
migration of the nano kernel init process without resorting to naming
or link order to force the ordering of functions at pure init
time. The need for change was discovered while moving the system
timers to be initialized by the init system. The base timer driver
(eg. HPET) must be initialised prior to the system clock being enabled
both of which need to happen before nano-kernel init.
Change-Id: I7a2994965e48a891a78268080113ac8fccceb261
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The SYS_PREKERNEL_INIT() macro was a temporary item until the new driver
initialization model was implemented.
Change-Id: I052db0c9f41f54bfd0b54b50aa0b18f018be640c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Prepares the _sys_clock_driver_init() routine to interface with the new driver
model. To this end, it must accept a pointer to a device structure and return
an integer.
Change-Id: I3c600ce1efb49c0864aae7b09663ca40d6289372
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Macro definitions must not have trailing semi-colons. Depending upon the
compiler, trailing semi-colons may result in a warning when a user invokes
those macros AND adds their own trailing semi-colon.
Change-Id: I34e8da2b0ce7c21ce67e84fab75ea3edefe19cfe
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
() Adds documentation to the header files for mutex.
() Update whole @file documentation in the mutex source
code to javadoc style, and adds some missing param fields.
Change-Id: Ic54d830ea3382aac94cf93e58cc9eb66e1a241b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move documentation comments to header file and prep
them for doxygen.
Change-Id: I3180cba7c86af97e3b4c0fceb0e1aa523ed4d219
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This defines the generic driver API that SPI controller drivers need to
follow.
Change-Id: Ibd14500fb7f0ca353b89b213914066276339940c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds bt_gatt_discover_characteristic which can used to discover all
characteristics in the given range.
Change-Id: Ia7ddb93dfdb0f979409e133c902a1cbd9ae9fe71
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
gatt.h API depend on bt_uuid so make use uuid.h is always included.
Change-Id: If9d4e5a668ac4e0b167eda8fe41e8b4810dfe298
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_discover can be used to discover primary GATT service by UUID in
a selected handle range, after it attribute found the function callback
is called so the user can interact the attribute found and decide to
continue to the next or stop.
Change-Id: I37514f00c82ce5520d7a14757a6ff12ee34f0736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add infrastructure and checks to validate the net_mbuf during
its lifecycle.
Change-Id: Id4b638fff991325d2247b1f24152552038888915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add macros that check that we are not trying to use already
freed net_buf and vice versa.
Change-Id: Ifdb6a7e24cd6d7a0de46fa7b991c358ea8828d6f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Making sure we do not include anything unless they
are inside include guard.
Change-Id: Ie88cbc0ed6dbbf4033f3c8c310df7d084ab8b126
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_reply() can be used if the application wants to reply
something to peer right after receiving the data. The function
will reverse the source and destination addresses and ports,
and set the uIP internal structures in such a way that the
reply is possible. Using this function saves the application
from allocating a separate net_buf for just sending simple
message back.
Change-Id: Ia960c83b77a8f300222159ee085fed99e2b007c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the Command Complete status is read, this status shall be returned.
Change-Id: Ic3fe102c16da4b01d002a2d39952fd401e9f832d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_exchange_mtu can be used to exchange MTU used by GATT, the MTU
is selected automatically based on the amount of data bt_buf can hold.
Change-Id: Id49a506663d922132e81c0a753a983b93579ffd0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The revised name conforms to Zephyr OS naming conventions.
Change-Id: I5bcdaf1df7da9d8ce5787a08b29ead91dd8f24ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removing the parameter to timer_driver() as it is not used.
Change-Id: I09275287eeb541be0dd315056b4f2bc6cbc2573c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all occurances of /*! to /** to match javadoc
style.
Change-Id: I3a759d34e0e928216f61252682266e64c5b875f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds HCI routine to cancel creation of outgoing connection.
bt_disconnect is called to cancel connection or disconnect based on current
connection state.
Change-Id: I462a61308a580bb24aa9a6c398eb7e443b995655
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This was same as low security and is not needed. This also match
security levels with LE Mode 1 security level from Core Specification.
Change-Id: Ia82e1f4d94c281d7e7f88f03a16a1e34eb49f710
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This command will be used to enable encryption when acting as master.
Change-Id: Iaaf1d5b98bfcfcf17a5cc7006a6c40d0905011fd
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This adds bt_conn_security function that can be used to elevate
security on connection. If device is not paired it will trigger
pairing first.
For now only JustWorks pairing is supported so full security level
tracking is not needed as only medium level is supported.
Change-Id: I6d344f55286a79bd989bd18f852a6859dc8ea96a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
6lowpan HC06 and HC01 compression/uncompression functions are
adapted to net_mbuf buffers. HC06 compression and uncompression
works properly. HC01 adapted to net_mbuf but functionality is
failing due to inproper IPv6 link local addresses. buf pointers
from net_mbuf and couple of net_mbuf calls are removed (which
are not used at the moment and saves memory from net_mbuf).
Change-Id: I2711b71b1b8df2eaac67d69275baf4b62b03f9f6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed for enabling RPL and 6lowpan support.
Change-Id: I87f95a08db2cc874bbe841d9b1456803ab16d75d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the bigger members are always list first in non-packed
struct to minimize the use of padding for alignment by the compiler.
Change-Id: I64419e9b27f4e7d3abb4eeb0ef2a88beda5b22e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move packetbuf from net_buf to net_mbuf, update 802.15.4 stack
with net_mbuf (which is smaller in size, and mostly wrapper for
packetbuf) and split sicslowpan(ipv6/sicslowpan.c|h) functionality
to compression and fragmentataion. This patch contains
null_compression and null_fragmentation which is exactly what
uip_driver.c|h does.
Change-Id: Ifee359e20aa57a50fb00c9ce049d9476b2ac67e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After an IP packet has been (reassembled and) received, the driver
submits the IP packet to the IP stack.
Change-Id: Icbd1e7740ce59db16bc1d61002420e86ab101d2d
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We do not need large 1280 bytes long buffers in lower IP stack
layers. After long packet has been fragmented to smaller chunks
it depends on the radio technology how long buffers we need
to use. For 802.15.4 we can use 128 bytes long buffers.
Change-Id: I8cd6085944d78fa26a4aa1a93c58fc436856541b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The uip_len(buf) cannot be used as the Contiki stack zeroes
the buffer len after sending and after processing received packet.
Thus the application can use uip_appdatalen(buf) macro to get
the application data length.
Change-Id: Iaaa508acb96c28919cfc0188ef46bb2b4a693090
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This header defines the public API for I2C drivers and the I2C
driver interface.
Change-Id: I7ed19c0f2a13a34bbaf35b50b648b73b5570bbd7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This header defines the public API for GPIO drivers and the GPIO
driver interface.
Change-Id: Ibd9c1065cda4691c3ab9920fd7a5e2aa178e4f4b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Using the symbolic names in the macros fails to create the correct
object. Likely due to the order of evaluation by cpp. Back out this
change.
Change-Id: I3948228ecdab3c1087faf6e9dc9f25455ed63e7a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changing the spelling to comply with the checkpatch tool.
Change-Id: I7f28fd73bfbc89d91e4d7caccffa2c018dcadf6d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This is helpful when working with UART through dynamic
interrupt stubs.
Change-Id: I91d64f575aa755fcfd894d678a1c078219447f16
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add the call sites for the various init levels defined by the init
system.
These call sites are noops if there is no init proceedure registered
at a given init level.
pre_app_init has been renamed to app_early_init and late_initconfig to
app_late_init to better reflect the ordering and intended use of these
init levels
Change-Id: I71e38d936a97da8fe163f4b7cf0ce6725f1c903e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The kernel version has been converted from a string to a four-byte
quantity that is divided into two parts.
Part 1: The three most significant bytes represent the kernel's
numeric version, x.y.z. These fields denote:
x -- major release
y -- minor release
z -- patchlevel release
Each of these elements must therefore be in the range 0 to 256, inclusive.
Part 2: The least significant byte is reserved for future use.
EXTRAVERSION is used for intermediate releases and customised
builds on top of an existing/released version.
Change-Id: Ibb7dd5654c36daeaa3a53499857d254aaef25bdf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The revised name better reflects the fact that the file defines
macros in addition to declaring variables. In addition, most of
these APIs use the "sys_clock_" prefix, which aligns well with
the new file name.
Change-Id: Ib33517d4b19ec2455303b87200c677e87640fcbc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I608404a762cf9d1100d58fe80c82c0e40ada2ff1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I6c2cacff68d150eaea5d118d582c5f8246911924
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I1e9bf3dc25de537cecb679e0e0b27e5f54b2aa13
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: Ibe1de0dca3488a2a38b620ff0e74e253d8da8d35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: Iee532e9fbbcafbf9ba44c91de0894b7181285e8e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This file defines public microkernel APIs that are utilized
by more than one of the microkernel object types. It contains
both types and symbolic constants.
Change-Id: I2bc39ffe6655e5ddeec1e55c4caee01e02526595
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
IRQ_CONNECT_STATIC() macro provides static interrupt registration.
It creates an entry for _sw_isr_table, table of interrupt handlers.
IRQ_CONFIG() macro provides interrupt controller configuration.
On ARM platform it configures the priority of each interrupt.
_sw_isr_table is implemented the way that each of it's elements
is located in individual section. Sections are marked a "linkonce",
thus when a device driver declares an interrupt handler, it overwrites
the default _sw_isr_table entry.
Change-Id: I182bf7158dd67f45b597783dca038a4f78166a03
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to simplify x86 interrupt stub creation, each interrupt
controller implements an interrupt stub definition macro.
Add IRQ_CONNECT_STATIC() for static interrupt registration, and
construct the interrupt stubs name from device and interrupt
handler names.
Add IRQ_CONFIG() macro for the interrupt controller configuration.
On x86 platform it programs APIC to associate an IRQ number with
the interupt vector.
Add HPET_TIMER0_INT_PRI parameter to Quark platform header to
make it build correctly.
Change-Id: I24ad25e1aa807ffa63733a27ad882877fcad72af
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The Cortex-M0 processor is not supported.
Change-Id: I3ada6615a8b41eb318f80edb13947f70459c761b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When connected, the peripheral/slave can trigger changing connection parameters.
Handle such request on central/master and if needed update controller settings
regarding the relevant connection parameters.
Change-Id: If3c1d91752f8d3875918bd8bfe923330790f530e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function allows to pick connection destination address.
Change-Id: I3e4959eec00905c64de3d8b9ef810b613c2e9f91
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Create IN6ADDR_ANY_INIT and IN6ADDR_LOOPBACK_INIT address
definitions for applications.
Change-Id: Ic864f559cae90a5f85e45ee90d73127b0ed8fde6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network driver should call this when it knows the device MAC or
EUI-64 address.
Change-Id: Ie03a80fcdb9a10cd1cb15f12037b3802da13bca9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network address union that holds IPv4 and IPv6 address
should be anonymous as there is no need to refer the union
separately.
Change-Id: I70bab6b91dcf49dfb5adb405eb2b9c602f932603
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the documentation style consistent and add documentation to
functions that were missing it.
Change-Id: I1822480a604bb2efcb0dbfc63ae0675ebf4b5987
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds user helper functions dealing with formatting bluetooth
address.
Refactors internal helpers using public ones.
Change-Id: If7b9f9a93b2aef3d25df55d6cfae9de05d8830b0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This API is useful for applications wanting to monitor and disconnect
connections.
Change-Id: Ib1a98ece364f137262515fbb1163c6b08ddf792c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To make it clearer that these helpers are intended only for
Bluetooth-subsystem internal code, move them to a separate file.
Change-Id: Iea64780f5c61c1c96e12c9df378676bc49498fe4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of new guidelines to document Bluetooth UUID API.
Change-Id: Ib4c96f97709610b762f6e839294a4db3ac447e73
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds internal HCI interface routine for creation of basic ACL LE link.
Most of the command interface parameters are fixed.
The internal interface is then used directly by simple public interface with
no connection validation.
Change-Id: I8ed72a9d01348e2a05b62facc9e85060e4500631
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As the macros ALIGN_STRUCT(x) and PACK_STRUCT are no longer used, it is safe
to remove them. (Their replacement macros are __aligned(x) and __packed.)
Change-Id: If52302b6fba91ac707af828396592ecc3016934d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The nanokernel time tracking code (ticker) can now exist in microkernel
systems. This allows the ticker that drives nano timers and timeouts to
advance the tick count for these in a microkernel, thus allow their
presence there. Previously, nano timers could not be used in a
microkernel.
Change-Id: I17f2b659691a081b0f9bf3961ed030533aa02a15
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel timers are now available to microkernels, alongside
nanokernel object timeouts.
Change-Id: Ia2f0b93e8f848fd02b7260e35c0322d6501c8280
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel needs access to these values since the nanokernel objects
API will provide a way of waiting with timeouts.
Change-Id: I2b39fccc1c2a2b5ba937aff774ab2ebc649e643b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the _timeout() variants to the _get_wait() routines. Those allow
waiting with a timeout. The return values are the same as for the
regular _get() routines: a valid pointer on success, NULL on failure.
Note that the task_ variant is still polling, and the task is not put on
a timeout queue, instead polling for the ticker change in addition to
data arriving on the LIFO.
Change-Id: Iad8fa00b3fa0656fee9a67b2dd8b316e1e8aac74
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the _timeout() variants to the _get_wait() routines. Those allow
waiting with a timeout. The return values are the same as for the
regular _get() routines: a valid pointer on success, NULL on failure.
Note that the task_ variant is still polling, and the task is not put on
a timeout queue, instead polling for the ticker change in addition to
data arriving on the FIFO.
Change-Id: I6650d0de8494c15698d670442da1e9c8d8c89910
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the _timeout() variants to the _take_wait() routines. Those allow
waiting with a timeout. The return values are the same as for the
regular _take() routines: 1 for success, 0 for failure.
Note that the task_ variant is still polling, and the task is not put on
a timeout queue, instead polling for the ticker change in addition to a
semaphore state change.
Change-Id: Idef357f99a5ca30e20665a25abc54d253a848a52
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This new API allows starting a fiber with a delay. It returns a handle
to allow cancelling it before the fiber starts, via the cancel API.
It also adds an API allowing a fiber to sleep for a given amount of
ticks.
NOTE: CONFIG_NANO_TIMEOUTS must be enabled.
Change-Id: I608dc47b5f08321cfd0c1dd9bb18d1d77eab87e3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The timeout queue interface will allow having fiber interacting with the
nanokernel objects wait with a timeout. It can be completely excluded
from the kernel if not needed, via the CONFIG_NANO_TIMEOUTS option.
Most of the timeout queue interface is contained within timeout_q.h.
However, this file should never be included directly: rather, the
wait_q.h file is to be included instead, which itself provides NOOP
abstractions for some timeout functions when timeouts are not enabled in
the kernel.
Change-Id: Ifeb1b934e0c71d00c59ebc88a54ab26e49686807
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The old doubly-linked list implementation had only support for very
basic operations, i.e. add at head and remove.
The new implementation is highly enhanced, allowing these operations:
- initialize list
- check if a node is the list's head
- check if a node is the list's tail
- check if the list is empty
- get a reference to the head item in the list
- get a reference to the next item in the list
- add node to tail of list
- add node to head of list
- insert node after a node
- insert node before a node
- insert node at position based on condition
- remove a specific node from a list
- get the first node in a list
The implementation is completely inline, since the operations are rather
simple and do not warrant a function call.
Change-Id: Id85c04e67f6a88b005390172f1276daa12bcf8ce
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Obtain the pointer to the encompassing object from the location of a
field in the object.
Change-Id: If8f9ffa4998c4c19b4cd17293610fff677fa0158
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename nanokernel's _do_sys_clock_tick_announce() to
_nano_sys_clock_tick_announce() so that it can be called from the
microkernel tick handling code without name ambiguity.
Change-Id: I2ec9dd92ceda51f00be1dd95bc3239d6b2e82943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The #include <__assert.h> in nvic.h must be guarded by __ASMLANGUAGE
since nvic.h is usable by asm code, and __assert.h is C-only.
Change-Id: I16d72e4579705dbd0bfb55a787525c5938fd1f22
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This mega patch changes how Contiki uses buffers. In standard
Contiki there is only couple of static and global buffers.
This makes the stack non-reentrant and only usable in one
thread. This patch replaces the global buffer with buffer
supplied by caller (net_buf.h). The Contiki stack is still not
fully re-entrant after this (packet reassembly needs more TLC)
but it is a good start.
Change-Id: I63abc230b36b14f33f687d3ef64cffb0f3a69f5d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network context defines a network connection.
Change-Id: I29a186be6c9de9d824f10b6442fa1dfd3711d24d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Functions to receive data from apps and transmit it to network, and
receive from network and pass data to apps.
Change-Id: I1b1b8c041e6c5e20294081d2cd403636e9909cdc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I79c7e82e73653315ba1a609edbf11336694b9dd4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API is now a private microkernel API.
Change-Id: I5b26aa927d42923f2076d06f9bdfef371572543e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allow the delevoper to specify the address of the driver instance data
object at build time.
Change-Id: I6b311cfc4d38b3425f6283d87d2da65aceb42faa
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Functions bt_init and bt_start_advertising are referenced in the
doxygen documentation. Documenting them gives better overview.
Change-Id: I70cb19a0a3232ce5abfb22c3a352bf3868c6f8fb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add BT_GATT_CEP and BT_GATT_LONG_DESCRIPTOR so which can be used by
a task to declare long attributes.
Change-Id: I37a0bb1851b60f3cdfa7e2f00ade70d5c344abbf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Characteristic Extended Properties has 16 bits not 8 bits as value.
Change-Id: I307fd27a6d589d6614829df178ff890301a9b6be
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduce a new callback called flush to bt_gatt_attr to indicate
when and attribute can cache data, the data is automatically flushed if
regular write request happens and in case of prepare write it checks if
flush is supported otherwise return an error, then upon receiving an
execute write it perform flush over the entire database and respond
with result:
< ACL Data TX: Handle 42 flags 0x00 dlen 6
ATT: Execute Write Request (0x18) len 1
Flags: Immediately write all pending values (0x01)
> ACL Data RX: Handle 42 flags 0x02 dlen 5
ATT: Execute Write Response (0x19) len 0
Change-Id: I2c47f962858b8a741bf40509a648fe2cd6755691
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of new guidelines to document the GATT API.
Change-Id: I5544f449e11dd72c68b0efb15bd06db44ec30279
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a connection is made, track its role.
Only peripherial/slave role may trigger update of L2CAP connection
parameters.
Change-Id: I72244581650248c7b020c9e5673b73ce46e7399d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The spec says that CCC shall only be persistent accross connection for
bonded devices:
'The Client Characteristic Configuration descriptor value shall be
persistent across connections for bonded devices. The Client Characteristic
Configuration descriptor value shall be set to the default value at each
connection with non-bonded devices'.
To handle this now each configuration has a valid field indicating if the
configuration is valid.
Change-Id: Id74ac54f5e23a7a0b286f90dbc9af4e9ee966dd4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds callbacks to notify app about connection and disconnection.
Change-Id: If8091254d929fe53d12b153e6f216223a8913f2d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The PACK_STRUCT macro will be removed soon and __packed is what all
code should use. Convert all the usages in Bluetooth code.
Change-Id: Id5c724566565f67fa8167b61398c508194ece89b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reorganize and compress some of the buffer variable to achieve smaller
struct size.
Change-Id: I1ce711c22844470403b085b0f13e77f762f25262
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All public headers should be self-contained. Since gatt.h uses the
ARRAY_SIZE macro it should also include the <misc/util.h> header file
that provides it.
Change-Id: I1fea66d10f452e51d9af5f5c6c345b5bb5a92d00
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This event comes instead of Encrypt Change when we re-encrypt an
already encrypted connection.
Change-Id: I7fe9545e6c58392a34d72f3dd3962c475ebb7871
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The public header file buf.h uses stdint.h definitions and should
therefore have the necessary include statement (since public header
files are supposed to be self-contained).
Change-Id: I9e2a9e13e5d2c35aa61c7552c3ba9fa73b8886a6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_gatt_notify can be used to send ATT notifications:
< ACL Data TX: Handle 3585 flags 0x00 dlen 8
ATT: Handle Value Notification (0x1b) len 3
Handle: 0x0010
Data: 64
Change-Id: I908f10f9e60dc7cef221e4b27c3b6e49e7b0cfc9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_GATT_CCC uses _bt_gatt_ccc internal struct to handle peer
configurations and special helpers to read and write to minimize the
code necessary to handle CCC in the task.
Note this not yet include handling of connection and disconnection but
the idea is that the core would automatically disable the configurations
while disconnected and re-enable once peer connect back.
Change-Id: I89325b8a074766b9fd2423085565df669f7275e1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To implement CCC properly it is required to know the remote address since
it is per client, futhermore bt_gatt_notify requires an address where to
send the notification.
Change-Id: I9d9fdf72d668831bed76e2aef06816af3620f4b8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hexadecimal values should be in lower case.
Change-Id: Id79347997bab0673fb90f6f00ec9c2cff1440ee2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is needed when one wants to avoid gcc
"dereferencing type-punned pointer" warnings.
Change-Id: I7bfd68fabb07deb64908cb0eaa833bdc5c8a4e08
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This driver is a very simple UART driver that can be used to implement
a protocol in application. It has no protocol logic and just allow
application to receive and send data over UART in platform independent
manner.
API is designed to minimize number of required memory copies.
Application is able to provide new buffer every time it decides to
consume received data. It is also able to just alter offset and
reuse current buffer eg if data was corrupted or otherwise invalid.
Change-Id: I8d3827fe2e242196e986d0419bc5487357481558
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Eliminates references to the obsolete OS name. In most cases the
name is simply removed, as it isn't necessary.
Change-Id: I32f9e7390e436aec008a9454b72657e129d65152
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add operations to manipulate individual bits in an atomic_t variable
or array of atomic_t variables.
Change-Id: I40133e203af36ebadbef93cfa1a9df04b62a94c9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The atomic_get() function is a read-only API which doesn't modify the
value given to it. The input parameter should therefore be declared as
const.
Change-Id: I084b7beb623610412f9237fc9dae6139580e2636
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This feature is still under development, so it's APIs shouldn't
be publicly advertised yet. And while they are being relocated,
they are renamed to adhere to kernel coding conventions.
Change-Id: I7a41d98e2fbb3b975fa42814cf64854f8cc0b623
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The ENDGROUP symbol isn't needed as it is identical in nature to
ENDLIST. The EMPTYID symbol isn't referenced anywhere (or described).
Change-Id: Ic2ba115ee6cde65fa5e57f8607ffa95979ba5f5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of #includes that are no longer required as a result
of recent reorganization of file content.
Change-Id: I9d74b4f1506e26c235e2621099561a4ac3067e43
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The tCCS type doesn't need to be publicly exposed; any public APIs
that need to use this kind of type should be using nano_context_id_t.
Change-Id: Ife1e73c4a21326bf54e2d52bfa1f1281245935a1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This file doesn't belong in the architecture-specific portion of
the tree, and its contents don't warrant their own file, so the
content is moved to the main nanokernel public API include file.
Change-Id: I0455fc9eb4f5ca31a8e6b487f56b09d0562fdb77
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Introduces nano_internal.h, which will declare all architecture-
independent non-public nanokernel APIs. This file is automatically
incorporated by the various architecture-specific include files
for non-public nanokernel APIs, and will not normally be included
directly by any other files.
Change-Id: I9f3de812a5747cc720fa0ff739007315e8d07dd9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These declarations are now co-located with the declarations
for the routines that utilize them.
Change-Id: I70940923d9e424345aeac60cb5ddd7f7a2a54734
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since microkernel task monitoring is currently experimental
anything related to it shouldn't appear in a public include file.
Change-Id: Iff0e6137085ed0743fb34e97f5cee1bb98aecaed
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These files now have no useful content.
Change-Id: If5d2df361eb8769ca38c4ae63f68a5681b3ad85b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These now appear in the files which declare other non-public
nanokernel APIs.
Change-Id: Iea01d6de44851a08b308004b2c3104c08b020970
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since cputype.h no longer has any meaningful content it can be
eliminated, along with the arch-specific files it incorporated.
(This means that the arch-specific nanokernel public APIs are
now referenced only via cpu.h and its derivatives.)
Change-Id: I7f35b6c3c6c092d61c372ff85d73e49414474938
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of places where there is no need to include these files
at all, or places where these files are being indirectly included
due to the inclusion of nanokernel.h.
Change-Id: I7b58148af454b977830c00a6b519a78d0595603b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Moves these macros to the main public API include file for each
supported architecture, since the <arch>type.h include file is
to be eliminated.
Change-Id: Ia87b9c0bed1501bcce7f363bd4155f7ef642376a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises and documents the confusing and inconsistent set of
dependencies for the kernel's two main public include files.
The files now now clearly exhibit the following behaviors:
1) microkernel.h provides access to all public microkernel APIs,
public nanokernel APIs (both architecture-independent and
architecture-specific ones), and public "generic kernel" APIs
(such as kernel version and system clock APIs).
2) nanokernel.h provides access to all public nanokernel APIs
(both architecture-independent and architecture-specific ones),
and public "generic kernel" APIs.
Change-Id: I64d1e88bb033ef10692033bb78e44cdcbe8124bc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several files were not explicitly including APIs that they reference,
which could eventually lead to trouble.
Change-Id: Ib33cadfa658280df3fcb4c670463d41b63097b31
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard NULL symbol defined
for C99, rather than having its own custom symbol.
Change-Id: I74342f192e95899a83db879e8b1c8fe89ac8b92d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard boolean type library
defined for C99, rather than having its own custom boolean type.
Also revises sample projects that used the non-standard type.
Change-Id: Ib41b7f836da25352aa5ae9dfbbfdd29739017b6f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add infrastructure support having multiple instances of a driver
configured into the system each with its own compile time
configuration information.
Change-Id: I1e447af18311139b43f74fe0439483ccd132b63f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The "__stack" tag is to be used to align an array (to STACK_ALIGN) for stack
use by either a fiber or task.
Change-Id: I5828f3ee1b09b0b5ba894ea30689d179de347494
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The __attribute__ keyword is toolchain specific.
Change-Id: Ia3c0ff54d778785679c864704f8db6a3ba898948
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The __attribute__ keyword is toolchain specific.
Change-Id: I2183d154ccdb9b5bed3bc245cc37cbf4c5cc62cc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The names "__aligned(x)" and "__packed" are more generic than ALIGN_STRUCT(x)
and PACK_STRUCT respectively and are to be used in their stead.
NOTE: ALIGN_STRUCT(x) and PACK_STRUCT are now considered obsolete.
Change-Id: Ic5e859092643dde53bb8fa1117c6d877c2c4296f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Completes the renaming of nanoFiberStart() -> fiber_fiber_start().
There is little value in listing the callers of _NewContext() in its function
header. Not only was the (deleted) list both incomplete and wrong, keeping
it around and properly updated requires error prone maintenance.
Change-Id: Ic45f51b285c027a2e8be331c0d28c16bdc97647d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As it is impossible for GETTIMER() to return a NULL pointer, task_timer_alloc()
will never return INVALID_OBJECT.
Change-Id: I270732f31033d9ce55847dc9324f215680865273
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It is a fatal error if the microkernel is configured with either too few
command packets or too few timer packets.
NOTE: During this refactoring of _Cget(), not only is it renamed to
_nano_fiber_lifo_get_panic(), but it is moved into "nano_lifo.c".
Change-Id: I1d866cda1b444da04877f7eda03762b6e83c9a6f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This reason code will be used indicate that the kernel failed to allocate a
critical resource (such as a command packet or a timer packet).
Change-Id: I6d4c3d96fc70b2b8cab4027b1b8e4febf4d6c474
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Since ARC does not support the microkernel, there is no need to
define any microkernel event symbols for it. (And TICK_EVENT is
an architecture-independent concept anyway ...)
Change-Id: I918a55743f8685ef23b9bb5a8afc67b905ab9766
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The toolchain-specific macros used to generate absolute symbols
are now part of the main include file for that toolchain, since
there doesn't seem to be a good reason to have them in a separate
file.
Change-Id: Ic97800485b20d6c5b23d14f69f67ee845cf076f5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates the need to reserve the "kernel_" prefix in the
kernel namespace. Also, aligns versioning with other APIs
that are neither nanokernel_ or microkernel-specific, such
as the system clock APIs.
Change-Id: I81e43cd03849b45a4b432b0875dc8b1d5862dba9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now located with the other public APIs related to kernel versioning.
Change-Id: I60e0111d696b3a4f2f56b7d2021a391b6b00432e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Renames APIs to align them with conventions used by other
general-context nanokernel APIs.
2) Relocates implementation of these APIs to the architecture-
independent portion of the nanokernel.
Change-Id: I1aa60029aaa96697cd8fcb594bbae23ba6656661
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The atomic APIs are not really tied to nanokernel-specific
capabilities, and can be used by anyone at anytime -- even
during system initialization!
Change-Id: I427954029b4b465127cb5b4b642c2f9968c17d5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These APIs are no longer referenced anywhere.
Change-Id: I56e3410b9fb6bc4eb72bc9299b33f75227916434
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This is not required since the secure string library routines
have been removed.
Change-Id: I284a21e4167d9bb6f78354d809c563a4c52f619c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Convert the existing non-public random number generation APIs
into public APIs (i.e. sys_rand32_init and sys_rand32_get).
Change-Id: Id93e81e351a66d02c08cf3f5d2dd54a3b4b213c5
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Added BAR (Base Address Registers) as a parameter for PCI scan.
Some devices (as UART in Quark) use two set of BARs for different
purposes. A driver may require only one of them.
BARs are numbered from 0 to PCI_MAX_BARS.
PCI_BAR_ANY means ignore the BAR number. Constants are defined
in drivers/pci.h
If device class is not specified as a scanning parameter, and
set to 0, ignore it.
Change-Id: I6b7116c5c6cf9c470ab22bec9eb74842f15b5d99
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit fixes issues to allow build on ARM architecture.
- It fixes the include paths in Makefiles.
- It fixes the include path for the offsets.c compilation.
- It fixes the linker command. This changes is needed because gcc
ARM cross-compiler does not accept an AT() command without
specifing an address explicitly. This corner case appears
on ARM architectures when XIP is disabled.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ief8b53c4cc154abba7b7827121ec5a56f62b7b26
bt_gatt_foreach_attr iterates over attributes via callback, it will be
used to implement discovery functionality.
Change-Id: Ice66f4b3d0d12b3616986931d5da0fe0f202e533
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_uuid_cmp compares 2 UUIDs returning if they match, if the types are
different it converts both to 128 bit format before performing the
comparison.
Change-Id: Iacf330cc0271a7e5429cbb2f405a7d9ef249a1a3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds initial API and definitions to create a database.
Change-Id: I69d5b3f5fd2f04cc309c2f76a84581673aa54e7b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We use addresses in lots of places and with LE we always need to pass
around the type in addition to the address value. Defining dedicated
types for addresses makes the code much simpler.
Change-Id: Ie8b495dce50e3f084685909c19acc5d08e2cca10
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
UUID types don't come from any spec so it is safe to have a enum which
can be changed whenever we want.
Change-Id: I7549f3a487191eeb847a239936f882ff88f4d345
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
UUID defines, etc, will be needed by multiple files including GATT.
Change-Id: I855d3934242f54a8b5bf31652a4f8b9dfb63ef06
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There will be various scenarios where we need to know what the current
encryption mode for a connection is.
Change-Id: I9836ffe51bfb6ebfc09497c7c716bd13a4064305
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an event handler for LTK requests that looks up the LTK using the
new bt_keys API.
Change-Id: Ifc4e5f96e84026d7e8c68eacb64154dc0a9c72b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BLUETOOTH_DEBUG config option bumps the stack sizes to cope with
printf requirements. Since all the logs use printf now they should
only be available with the bigger stack sizes to avoid surprises.
There are still basically two levels of log enabling where
BLUETOOTH_DEBUG enables the ERR/WARN/INFO everywhere and the
BLUETOOTH_DEBUG_* enables BT_DBG for a specific subset of the stack.
Change-Id: Ie8d64e47f44485efde32b40cd5bb34389c8e39da
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
printf() '%x' expects type 'unsigned int' for 'x', but parameter has
pointer type.
Change-Id: Id2d365a32b2e3e711359bd56741370d8167db868
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Including the context ID in debug logs can help track down various
issues, e.g. stack corruption.
Change-Id: I3cd70edd5bfd1d726f6d35e7331afb313cf3cacb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The printf API has a much richer support for various format
specifiers. Switch the Bluetooth logging macros to use printf instead
of printk and make sure STDOUT_CONSOLE gets selected when
BLUETOOTH_DEBUG is selected (so printf actually works).
Change-Id: I9a9818d51a677c6c79a35fef6daca7979f61c78d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SMP procedures require us to establish a local random number. Use
the HCI_LE_Rand command to generate the necessary 16 bytes (the
command needs to be called twice since it only returns 8 bytes at a
time). Store this number in the SMP context.
To help debugging with various crypto related values add a local h()
helper function for printk/BT_DBG to do hexadecimal conversion.
Change-Id: Id3e8793a77ac635023b3cc3a94e8679170455870
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To make the bt_buf APIs consistent with the recent bt_but_add changes
and more user friendly, change the pull() and push() return values
also to 'void *'.
Change-Id: I25242635c87882db99152735c22316d4de00d363
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Almost all callers of bt_buf_add end up having to do explicit type
casts of the return value since 'uint8_t *' rarely fits what's needed.
Changing the return type to 'void *' removes this extra type casting
need and makes the API friendlier to its users.
Change-Id: I6a79605006153b6d09f0d662a051cb599af68c37
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_buf_pull_le16 convert the initial 16 bits to little endian.
Change-Id: I6f6e9d63fc19b0579d9f445e15e975929fc63ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IRQ and registers are hardware and driver specific information and as
such should no be exposed through the generic API.
Change-Id: I33e6d7ec7bd9fb82a4e343d99b7a5c17886d1470
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a tiny change s/which/port.
Change-Id: I69be83f9805d71f5ec0ad68b146816d2a4fe221a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This fixes many issues around PCI enumeration from old API:
- a static internal table was fed with scanning results, thus eating
memory, and worse: due to the limit of its size, scanning for new
classes was impossible unless growing statically the size of this
table --> more memory eaten! Not to mention PCI enumeration is done
once at boot time for driver initialization and that's all, so this
table is hanging around for nothing afterwards.
- one needs first to scan a class, then maybe he will be able to find
his device via pci_dev_find. Where all could be done at once.
- pci_dev_find was not trustworthy due again to the internal table. Now
if the device is not found, one will know it really went through all
the possbilities.
- still let the possibility for hard-coded BARs value on driver side
(thus no PCI scan required). However this is greatly advised not to do
so as BARs might change over a firmware/BIOS update.
Comparison:
old pci_dev_scan: could only filter out via class mask.
new pci_dev_scan: can filter out via a class, a vendor and device ID
(it could easily do the same for Function and BAR index as these are
usually fixed and informed through datasheet)
old pci_dev_scan: was limited in its findings by the size of the
internal result table.
new pci_dev_scan: can proceed through all the buses and devices every
time (there are optimizations to avoid useless work of course)
old results did not tell about the function or BAR index.
new one tells, and the structure has not bloated.
old internal code: was storing a big table of results
new internal code: is only storing a small lookup structure and an
array of Bus:Dev pairs for each PCI class for optimizations purpose.
(though, if needed, we could disable this through some #ifdef)
Usage:
- Have a local struct dev_info
- Fill it with what you want to look for, currently: only class and
vendor_id/device_id. Function and BAR index could be added if needed.
- Call pci_bus_scan_init(): this will reset the internal lookup
structure.
- Call pci_dev_scan(<a pointer to your dev_info>): at first call, the
internal lookup structure will pick up the informations from dev_info
and will try to find out what has been requested. It will return 1 on
success, or 0. On 1, your dev_info structure will be updated with the
found informations. If more devices can be found against the same
lookup informations, just call again pci_dev_scan(<a pointer to your
dev_info>) as long as it returns 1. When 0 is hit, it will mean you
found all.
Change-Id: Ibc2a16c4485ee3fed7ef4946af0ece032ae406e4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These structures are only used by the microkernel itself, so they
now reside with other non-public microkernel structures.
Change-Id: I4bbba22e46c5336b7b3c41dcdc76e0d9de4e7e2b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There's no need to expose option combinations that are only used
internally by the microkernel itself.
Change-Id: I4e2725b060ce5edefdd1918c00fbd915cd67d8dc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Aligns file name with revised terminology for pipe objects.
Change-Id: I247f151f0496f33212f8a2ff7c6d126ecaf520ba
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Now invokes pipe routines directly, without the use of function
pointers.
2) Eliminates unreferenced _DEVICE_CHANNEL symbol.
Change-Id: I6e26476265ed8f33febb5a06c9d03daf7147ee5e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Routines are no longer flagged as constructors using the FUNC_CONSTRUCT(level)
macro. This is because some compilers do not support constructor levels.
To indicate that a routine should be a constructor, the SYS_PREKERNEL_INIT()
macro should be used AFTER the definition of the routine. For example ...
void my_library_init(void)
{
...
}
SYS_PREKERNEL_INIT(my_library_init, 500);
The first parameter to SYS_PREKERNEL_INIT() is the name of the routine. The
second is the priority level (000...999). The lower the number, the higher
the priority. NOTE: It is important that all three digits are specified;
otherwise the linker may put the constructors in an undesired order.
Change-Id: Ic334875c60a453b39c10a2ffdee856b4851cb16c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces various stringify type macros with _STRINGIFY(x).
Change-Id: Ic029d1e6ae344e960464310067eb1a648869919a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Not only is __start is a neutral label, but using a common entry point for all
architectures allows the entry point to be hoisted out of the linker script and
specified by the build system.
Change-Id: Ibcbb11a40ff964e0fc3c90afcfe231746071b040
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Keys off variations of "ICC" to remove references to the Intel C Compiler as
it is not supported.
Change-Id: I09f67880b39839982ed1c450e564c274440628a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames the include file defining non-public microkernel structures
from k_struct.h to kernel_structures.h, and relocates it to the
microkernel's non-public include file directory. This means that
applications and drivers including the microkernel's public APIs,
using microkernel.h, can no longer access non-public information.
Note: This change also eliminates some redundant #includes by the
microkernel's own subsystems, since the inclusion of minik.h brings
in the vast majority of public and non-public APIs.
Change-Id: Ic7d9ec1ebb8a124ccd0aaad98b50e16c197ffa00
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises several trivial task APIs to avoid exposure of task object
internal fields.
Change-Id: Iefa8028042dff1abd1f447eb1cc1ee49f0c2eda5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hard-codes the size of the command packet structure so that the
public microkernel semaphore API can utilize command packet sets
without utilizing non-public microkernel API information.
Also adds code to generate a build error if the hard-coded size
is too small, just in case the size of the command packet changes.
(Can't check for size equality, since the structure size may vary
from one compiler to the next. If the value is too large any extra
space in the command packet set will simply go unused.)
Change-Id: I69e7c2f08e3fe75d74bd712459d5587e22443c04
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes non-public type definition used to implement the microkernel's
task IRQ support from the public API.
Change-Id: I42c22f0fa323c5b9abbc7d3d29a89a9b2b903a36
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Eliminates declaration of variables that are already being
included by a microkernel subsystem include file.
2) Eliminates duplicate declaration of timer_driver().
3) Moves definition of well-known events to the event-specific
include file.
4) Moves declaration of a task-related routine to the task-specific
include file.
5) Moves declarations that are only needed by kernel_main.c
to kernel_main.h.
Change-Id: I6f387915a5ce208879482522586b977118f657e7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer drags in include file defining non-public structures.
Change-Id: I91098867b31e34e8d16639339bbd938dcd8869af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This structure is no longer referenced anywhere.
Change-Id: I41eb69dbab9a6e73b947a0a46fced9d8f7166922
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Needed to quite compiler warning which is turned into an error by
-Werror
Change-Id: I1f84af332e516edbeaa5e1836653c21935ca7924
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the local APIC timer driver is configured into the system it needs to
ability to enable/disable the local APIC timer. The definition of the
LVT mask bit was moved into the APIC interrupt driver as part of the
driver reroganization effort. Move the definition to the public header
file.
Change-Id: I8e7f8eab9f39aa17b96079836c182bde6f7b4fd1
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The variable task_irq_object is global because the test_task_irq project
needed to access it. That data should only be accessed through the API.
To make the variable local, break that dependency to the test project
and restrict the access to the variable.
Change-Id: I1ccb21625d456714a038e0374d124b42aa72e577
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit fixes the issue marked as SPACING by the checkpatch script
deleting the whitespaces between the function name and the open parenthesis.
Change-Id: I972b1646904bf6e1131263f94ab5024a528ae07d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The gain is two-fold:
- Removes the need of preprocessor conditionals in the timer drivers'
ISRs.
- Allows removing the duplication of the 'tick announce' code across
all timer drivers.
Change-Id: I6078a0b00a833c1d1ca76474987c3214a0c05f7b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
No longer passes arguments to _nano_init() that aren't needed.
Note: Also eliminates duplicate declarations of _nano_init()
that are obsolete.
Change-Id: I36ddfc9ceb18e3e5d6942a23574e38c1dfd3eb65
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the "scp" and "scs" sections to ".scp" and ".scs" respectively
signals the "truesize" tool to ignore them as they occupy neither normal ROM
nor normal RAM space.
Change-Id: Ic22013965b20d0c14e08d4d0332f2b7d028d10d9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Similar to PACK_STRUCT it provide safe access to possible unaligned data
but it is much more convenient to use with non-struct types since all
one need to do is add a cast e.g. UNALIGNED_GET((uint16_t *) data).
Change-Id: I46402bdf1dd13081fe340a7214a84750a6cf04d2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make serial console interface more robust. Enables interrupts only
when registering input, all memory is managed inside application.
Interface to application is changed to have two fifo queues. One
queue is a free line slots and another queue is keeping entered
lines. This way memory for lines is managed inside application which
provides free lines queue. It is also simpler to manage entered
lines by sleeping on fifo_get on app layer.
Change-Id: I4776c03eddd1e7d880df3b902bd48f5f2c901cad
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds remaining AD types definitions that can be used in BLE.
Change-Id: Ic9c63a111a5269a53326005012dff955cf399fcf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The revised option name more accurately describes its purpose, and
avoids potential confusion with the microkernel's tickless idle
capability. Also, inverting the "polarity" of the option means that
conditional code that references it does not have to use negative
logic, which make the code easier to comprehend.
Change-Id: I0c6f82f077a87a28544048d214efa7020939e566
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates and renames the include file which declares non-public
APIs needed by sysgen from the directory containing the microkernel's
public API to the directory containing its non-public API.
Note: Need to come up with a more elegant way for generated
kernel_main.c to access kernel_main.h, since the current relative
path approach is kludgy.
Change-Id: I5e4b07038e566f1f161001d676a3b0faa487a480
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these routines from the microkernel's main
public API include file, but allows both sysgen and the microkernel
itself to continue accessing them.
Change-Id: Iaf1beff81d045e9df29eb07517793e4b4410f51e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these routines from everyone but the
microkernel's initialization code.
Change-Id: I5dc0a1395c7f01f39d8f283e4f48b0c95578902e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these variables from everyone but the
microkernel itself.
Change-Id: I03854f8fcfbd798f5cf1795fc8c261e6a31a9067
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of _task_nop() from everyone but the
microkernel's no-op subsystem itself. (This change forces the
sample benchmark project that measures no-op performance to
explicitly declare this API itself.)
Change-Id: I0cb2ec32d1c56b10743d5b2e727de2d5a99c95ea
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the K_TIMER type is a non-public API used within the micro-
kernel itself, it doesn't provide any real type abstraction benefit
that isn't served equally well by the struct k_timer type it is
based on.
Change-Id: I482d7c0459d5734402be541322ff752dd1a3714a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The encoding of the microkernel object identifier fields is
something that only the microkernel needs to know.
Change-Id: I3701760cdce5768e082b6d2432b75382f5a2f557
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these APIs from everyone but the
microkernel's timer subsystem itself.
Change-Id: I49482a6e16fee28f1ed3e2244e47df401854c9fc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of the microkernel timer list variables
from everyone but the microkernel itself.
Change-Id: I81b64040efce849328e860067e37731b755a094d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no longer any need to differentiate between kernel-visible
and user space-visible APIs, as only kernel space is supported.
Change-Id: I681ed15d3fa0b90f3e2ba2ed793031ec3dd02b3b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Spaces between the function name and the open parenthesis are not allowed.
This commit fixes the case where only one open parenthesis with leading
whitespaces is present in the line.
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces between function name and open parenthesis
for line in $(eval $checkpatch_script $file | grep "WARNING:SPACING: space prohibited between function name and open parenthesis '('" | cut -d":" -f2)
do
echo "$file : $line"
sed -i ''$line' { /[ \t](.*[ \t](/ b skip_it s/[ \t]*(/(/ ; :skip_it }' $file;
done;
done;
Change-Id: I1e026eaee930e297374e5f2f725b78f29824dee3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Changing each four whitespaces for one tab at the beginning of the
lines that the checkpatch script marks as having the warning LEADING_SPACE.
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "WARNING:LEADING_SPACE" | cut -d":" -f2)
do
sed -i -r -e ''$line' {s/^ /\t/; s/^([\t]*) /\1\t/g}' $file;
done;
done;
Change-Id: I999e59710f52098ad3ec336b99c05356215cc671
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The open braces of the 'if','for', 'while' and 'do' statements should be at the end on the
same line of the statement to comply with the defined coding style. E.g.:
if (x is true) {
we do y
}
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*" ! -path "*/outdir/*");
do
if [ ! -h $file ];
then
# obtaining the line's number where the error is reported in a reversed order
reversed_lines="";
for line in $(eval $checkpatch_script $file | grep "ERROR:OPEN_BRACE" | cut -d":" -f2)
do
reversed_lines="$line $reversed_lines";
done;
# fixing the issues in reverse order due to lines can be deleted affecting futher lines
for line_reported in $(echo $reversed_lines);
do
# search for the line where the open brace is
char_found="";
let line=$line_reported-1;
while [ ${#char_found} -eq 0 ]
do
let line=$line+1;
char_found="$(sed -n ''$line' { /{/ p }' $file)";
done
let statement_line=$line-1;
let brace_line=$line;
# condition to avoid modifying lines that ends with the character "\"
char_found="$(sed -n ''$statement_line' { /\\$/ p }' $file)";
if [ ${#char_found} -eq 0 ];
then
# fix the issue
echo "$file : reported on $line_reported (found on $brace_line -> moved to $statement_line)";
sed -i ''$statement_line' { s/[ \t]*$//; s/\([ \t]*\/\*.*\*\/\)$/ {\1/; /{/ b already_done s/$/ {/; :already_done }; '$brace_line' { s/{[ \t]*//; /^[ \t]*$/ d }; ' $file;
fi
done
fi
done;
Change-Id: I517c40bb33840ef531f2319354350f578b238abb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There are many scenarios where it is convenient to have a helper to
evaluate the number of elements in an array. Having this helper in a
common place helps avoid duplicated code.
Change-Id: I05e9513bca756675483276cb6ae777c487f5a949
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ia753f8415b656e3b819a9cdb1eb24d02b750f9d2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Explicitly moved from __ to _ by direction of Ben Walsh
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idd6f7c3c2fdd818f0a794985f3689705cac3c0a2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5c4719458d7bb90af2ba21594deed6885f958d34
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4f0c65fb93cfac7d91d89c034a4bccd46d33a2f0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I7fc572f869c5f104538cfb3f84b1b36071e54dde
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The 'proc' name was a remnant of legacy naming.
Change-Id: I1ee47e47728e4bd927d7fe2284f72ace6b9aebc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel LIFOs could only have one fiber pending on one of
them concurrently. If a second fiber wanted to take a contested
LIFO, if would kick the pending fiber out of the wait 'container',
but would not put it in back in the ready queue with an error. Instead,
it would, for all intents and purposes, remove it from the scheduling
mechanism of the nanokernel: the fiber would be 'lost' at that point.
The nanokernel LIFOs now make use of the fiber pend queue, and thus
allow multiple fibers to pend concurrently.
sysgen is updated since the microkernel initializes statically two
LIFOs, one for the command packets and one for the timer packets, and
the LIFO data structure has changed.
The nano_timers use the LIFOs and look at their internals, so they are
updated as well.
Change-Id: I250a610fcdee9d32172c88d38e6c3cfd5b437d15
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The nanokernel semaphores could only have one fiber pending on one of
them concurrently. If a second fiber wanted to take a contested
semaphore, if would kick the pending fiber out of the wait 'container',
but would not put it in back in the ready queue with an error. Instead,
it would, for all intents and purposes, remove it from the scheduling
mechanism of the nanokernel: the fiber would be 'lost' at that point.
The nanokernel semaphores now make use of the fiber pend queue, and thus
allow multiple fibers to pend concurrently.
Change-Id: If8a8cee55d47fa1454ee84c56950fd4da20cd436
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adapt nano_fifo to use the struct _nano_queue and the _nano_wait_q
interface built on it.
The nano_fifo is the first to be adapted to use these since it currently
is the only nanokernel object that can handle multiple waiters, and the
_nano_wait_q abstraction was taken directly from it. This allows an easy
transition and can reuse the same tests to verify the abstraction is
working correctly.
Change-Id: Ie96e6cf1cb21c99ab2fb9832f9b454a9e1ebd300
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow using it for nanokernel objects wait queue, and thus
having all the code for multiple-waiter nanokernel objects in one
location and reusable by all objects.
Change-Id: Ica27fea3d4bc74342e4c54fc8ea5a3425c293e80
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The microkernel server's stack area can be defined by the kernel
library itself, without relying on sysgen to do it.
Change-Id: I9359946ce9ca9138970db4e264fd25d8b92034c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Shorten API name by removing extraneous wording.
Change-Id: Iff67c4d7e82b7093e3d4d8a7ce61a3011e0ff517
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change _nano_ticks to 64-bit with the functions that operate it
for the consistency with microkernel.
Introduce *_tick_delta() functions that return 64-bit value
and *_tick_delta_32() that return low 32 bits.
Change-Id: Id02c9f4b2b5c309ad9aa0a82bb7f4330af7e34a3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
If a source code file depends on a configuration option,
that, in turn, depends on a compiler, this file has to
include toolchain.h.
toolchain.h includes a compiler specific header file that
sets the proper configuration option.
Change-Id: I7c9002522a8c6d6fd945e27a450ebe46ba9d4892
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order for better compiler support make sure that
absolute symbol macros are specific for a supported compiler.
As the patch modifies gen_config_abssym sources, at least,
host/src/gen_config_abssym host tool needs rebuild.
Change-Id: Iece19611e2410a9753e538c725c5c81a447bf978
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to have a better compiler support consolidate
inline assembler code in a set of header files.
If another compiler is used, that supports a different
inline assembler format, asm_inline_<compiler name>.h
heder files have to be provided.
Change-Id: Iecc7d96419efd767a8463933badd4db4a557de5b
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Revises comments to make it clear that the timer structure and
its fields are not part of the public API. Also eliminates an
unnecessary forward reference issue by defining the linked list
fields of the timer structure using the structure name itself.
Change-Id: Ic6489c38ab4e3a6408a0b9475bdd2956ae51c4a4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This renaming will impact the following functions:
nano_node_tick_delta
task_node_tick_delta
Change-Id: I5d3fdfe0121674d88b8f3d8777150b2242b88d1a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes.
This will impact:
task_node_cycle_get_32
isr_node_cycle_get_32
nano_node_cycle_get_32
This change also updates the nanokernel test API to work with the change.
Change-Id: I68de883b07d4775b09fda13e503c040b3f14baa7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the
following function names:
task_node_tick_get
isr_node_tick-get
Change-Id: I2591193976578689e70b9d6833d5a89a4dc0c4ce
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the following
functions:
task_node_tick_get_32
isr_node_tick_get_32
nano_node_tick_get_32
Change-Id: I27184c76516da16a0c3f335656f9efcee2fb549d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Eliminates unnecessary "node_" portion, as there is only a single
source for which workload information is collected.
Change-Id: Id7c03e2149d1b7979a6921e99e1db0288da09c0c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the microkernel now supports only a single processor, there
is no longer a need for a means to identify it.
Change-Id: If5b2d8e114d8a3bfdd597bc23d70be5e1fa2238c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer referenced, and not part of the public API.
Change-Id: I97b7bbfe695fc867f93cb222ad893d112f25f755
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several lines wrap beyond the recommended width. Cleaning up those lines
to be limited in size
Change-Id: Ie4b15087043886d481ce379d225cb9b96816d004
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
There is no code that these are attached to any longer. Removing the
dead externs to K_debug_req and K_debug_ack functions.
Change-Id: I169e6d13ff9d5c89029dea5322cecce62c27e3b1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
With the recent cleanup, the code no longer has the concept of a node, and
therefore no longer needs the following function.
Change-Id: Ib40886c0fc07a465327c95a13106d90f2aef5f0a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer have the concept of nodes, so this function doesn't
accomplish much of anything.
Change-Id: I273d0a6b746147c96046c13b8d46c17a7d0c2758
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method. This specific change maps the macro to the
function naming used by the OS.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
echo "Checking C, CPP, H, HPP, and s files..."
find . -type f \( -iname \*.[ch] -o -iname \*.[ch]pp -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
echo "Checking KCONF, LST, and PY files..."
find . -type f \( -iname \*.lst -o -iname \*.kconf -o -iname \*.py \) \
-not \( -path host/src/genIdt -prune \) \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: If41030c6b9f0417356807b0cc6f4c287378e0c17
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Instead of having global command completion handler we can keep the
code more concise by letting bt_hci_cmd_send_sync() give back the
return parameters straight to the caller. This patch extends the
buf->hci.sync variable to not just contain the initial semaphore, but
to have the return parameter bt_buf once the semaphore is given back.
The bt_hci_cmd_send_sync() function receives an extra parameter which
may be NULL if the caller isn't interested in the return parameters.
Change-Id: I41e3e4b1189c4a19d0159947a03fd7052cc98fa9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In certain scenarios we want to keep the buffers around for longer
and avoid the default bt_buf_put() calls from putting them back to the
available buffers queue. This patch adds reference counting for the
buffers, along with a bt_buf_hold() API to increment the reference
count. Now bt_buf_put() will only put the buffer back to the pool if
the reference count hits 0.
Change-Id: I1590c5574e18600939f55e5339a6da3d061f7682
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BLUETOOTH_DEBUG option enables extensive debug output to serial
console. Disabled by default.
Change-Id: I71a6ca4c4f1dfb5bd818e6b8320a07249befadfb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some logs indicate potentially problematic situations but are not
necessarily errors. Since we do want to log these regardless of the
debug setting it's better to have a separate BT_WARN macro for them.
Change-Id: Iad13fc4b58329113458c97b02855033836618f5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We're already sending 'dummy' buffers to wake up the connection
fibers. The problem is that if we provide a real buffer type it may
have unintended consequences. E.g. with BT_ACL_OUT when bt_buf_put()
is called it may trigger an invalid HCI_Host_Num_Completed_Packets
command.
This patch creates a new BT_DUMMY buffer type to avoid this scenario.
The new type is an alias for BT_CMD since the pool where these buffers
come from is not quota-controlled and synced up with the controller.
Change-Id: I42ac235811dc242345853f7858c10bfc43e4f07d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Every time we put a BT_ACL_IN buffer back to the pool we should report
this to the controller so it knows it can send us more data. This
patch makes the necessary modifications to the bt_buf_put() function
to trigger the HCI command.
The Host Number of Completed Packets command is special in that it
doesn't need to obey the reported ncmd value and also doesn't generate
any command status/complete events. Because of this we need an
exception for it in the bt_hci_cmd_send() function.
Change-Id: If65f28078fd0d81af853447e95bc53822fea75b7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To start supporting controller to host flow control we need to tell
the controller our supported packet count & MTU and send the enabling
HCI command. This patch does the necessary addition to the HCI init
procedure.
Change-Id: I51a66f8cc3a85782a5085f9aae0f4aeb59decad3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To track which ACL handle each buffer belongs to (needed for host flow
control) add the necessary information into a new ACL-specific struct.
Change-Id: Ie6cc7c32a70b43a4ff5954bb9dca34e4f62da292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To accommodate for ACL user data move the HCI command/event data into
its own struct and put it inside a union in bt_buf.
Change-Id: I680500b15709d14b1e9f70ced88664d607a6568c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to do proper flow control of ACL data to/from the controller
we need to have precise management of the available buffers. Mixing
with the events/commands buffers would make this impossible. This
patch splits the buffer pools into three separate ones:
1. HCI commands/events
2. Incoming ACL data
3. Outgoing ACL data
The total number of available buffers is also increased to match
what's the smallest number supported by current controllers (to avoid
the stack from becoming a bottle neck).
Change-Id: I7e131d61c83a4dda554068d7917c5ee09f2f837d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We may soon want to have a _wait() variant of bt_buf_get, so to avoid
the number of 'get' function growing too large consolidate the
existing get() and get_reserve() functions into a single one. The new
consolidated function also takes the type as input parameter so that
we know this from the very start and thereby plan for the split into
multiple buffer pools.
Change-Id: Ia09448565349def2be9bc08d9510fedd029480b4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon want to have dedicated pools for outgoing and incoming ACL
data. To know from which pool to get and put the buffers each buffer
should contain enough information to distinguish the two types. This
patch splits the old BT_ACL type into two new BT_ACL_IN & BT_ACL_OUT
types.
Change-Id: I7d3c05c26d2a70f80fb1229e245aa21673ec378b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The hci.h header file depends on the integer type definitions from
stdint.h and the PACK_STRUCT macro from toolchain.h. This patch adds
those so that users of hci.h don't need to be concerned of this
detail.
Change-Id: Ib1856cdec75a3bab1b86bc832cdec6ad0461db6d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The buffer handling code is quite large and will continue to grow. As
it's not strictly HCI core material it's better to just manage it in a
separate file. This patch moves the code to include/bluetooth/buf.h
and net/bluetooth/buf.c.
Change-Id: Ie1ff79ac2cfa132359ce9f7674ff812d34b228aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a simple event handler for the LE Disconnection
Complete HCI event. An extra thing the handler needs to do is to
re-enable advertising if necessary, since it will have been implicitly
disabled by the controller upon a connection event.
Change-Id: Ie6f2eecb8c1d7de16fea24c8fd1533545f41baa5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a basic event handler for the LE Connection Complete
HCI event.
Change-Id: Iea099fe1b8c87fcd00d13e8793ebce8ced7adec6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All LE related HCI events come wrapped in a LE Meta 'super' event.
This patch adds a basic event handler for it.
Change-Id: I4a037d4af080c3ba0f982586065c0c49b6cf7640
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We shouldn't be sending more ACL packets to the controller than it
is capable of accepting. This patch adds a semaphore to track the
number of available controller-side ACL buffers.
Change-Id: Ib280afa06aade68eee03e44e33624eebb700dad5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a simple API for enabling advertising and specifying
the friendly name in the advertising data. The API is probably not a
final one but fulfills the initial need to create apps that are able
to act in the LE peripheral role.
Change-Id: I3ff7e72ece377d872ef1b0e4ad44aeb293cc13e5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To manage LE advertising we need basic HCI definitions for the
commands and events involved. This patch adds those to the hci.h
header file.
Change-Id: Ic6cf17369ad09d97ca5c098f25ba786d265d0bfd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Revises microkernel memory pool code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: I38fc3916681bbd3ac678399724ddb679a16f6ead
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel mailbox code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: Ibd3ff657e0cad1320d037d7c1e3e3c673c56c9e9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel task IRQ code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: Idc9bd120151e5c18798e1ed98af30dabe245fe64
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel event code so that it properly handles the
case where the kernel does not have timer support.
Change-Id: I72b0cef0e6a8cd19206857ec6c7564edf94edb72
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updating the micro kernel structures and variable names to create a
more meaningful context by their name.
Change-Id: Ib3ae2cd9055f0690d454a0f52488721541c0fb62
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating the micro kernel structures and variable names to create a
more meaningful context by their name.
Change-Id: Ie7b14787d36d99ed131db6ac3d4fbb652dc39b57
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
As for 16 bits integers, let's add utility byteordering macros for 32
bits integers.
Change-Id: I3113b9890992e4335d300a17738e5bb772b719ae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Converts all remaining references to the obsolete LITE symbol by
changing them to CONFIG_TICKLESS_KERNEL.
Note that the tickless kernel capability remains experimental,
as more work is required to properly support it.
Change-Id: Ie0d2514d00c3fd86297f38499e79f4d9c9edc15c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Most kernel code that depends on the state of the LITE symbol
has this dependency removed, since the symbol was used for an
incomplete feature that could not be enabled. This change has
no operational impact, as the LITE symbol was never defined
by the build system.
In a handful of timer-related references to LITE are not removed,
as they will be useful in adding a tickless kernel capability.
Change-Id: I4ae37f484e3ab08093b732d45aca87d2e8678adf
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Section garbage collection is to be always enabled.
Note that this does not have any impact on performance measurements of any
existing sample project as they all use the default section garbage collection
value (enabled).
Change-Id: I57baa55dd52d45b633d8ca319e799ef483a5246b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of drivers/pci/, the public API headers will be found in
include/drivers/pci.
Change-Id: I577036660383e6bd9c015d6bbbcbc14bf8fb67ec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only moving the header from drivers/console/uart_console.h to
include/drivers/console/uart_console.h so source file did not need to be
changed, only the defs.objs files to look into include/drivers/console.
Change-Id: I585e16b50d9ffecf01ca9225e80f0e101f62ee4c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I6b3d61c9ae7b024bb82356678cc2fc1d433dd3bc
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I1a4bdbb5d7248896830ea25d2126b1bb9b918878
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: Id6215f2aaab918ce13e99909c21f67647cf7229e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I9f3fc202c580d158a18737ff0f16a25952902ae4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I0eb8925e53f00b7993374fd8ed3e6ac950dfc1ef
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I6e0edb61dcac091f87c9ffc8fd8bf507ba075367
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I5f879ff27f8b7d02ab148cb05dd1916a831a51a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I79b03884f154507aa22c42c3c89136c202c2c9e0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: If7f5e78d6dd5492dbbbcc080c2e822f33eb1c967
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I3de0a16879f142ef20830dfc429c989f10c2cd92
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I628e057f54eb72901c3753b6b8b4849c4cd046c0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I02122837d74c9d7c5c406e644feda6923b5161f2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Not only is the file mallocInit.h not used, that file is the wrong place to
declare the prototypes for malloc() and free() (which do not even currently
have definitions).
Change-Id: I4733085602eb106f629ba6b98cecec04d117728e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Revises this option to make its purpose clearer, and to align it
with other experimantal monitoring-type configuration options.
Change-Id: I593bb7560b5a0544eb05affaa07b59dd78ea907e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of code that depends on VXMICRO_HOST_TOOLS, which is
never defined by the build system.
Change-Id: I51fefaa6d17899454211781ae4b925560fbc9383
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This patch adds a full HCI initialization routine to retrieve all
relevant information from the controller.
We also need to introduce a new blocking bt_hci_cmd_send_sync() API
since some commands are conditional to the results of others. The API
is implemented with the help of a semaphore that's part of the
command's bt_buf struct. We wait on the semaphore and get it back once
the command has completed (with the help of the hci_cmd_done
function).
The patch also adds variables for storing various controller specific
parameters which will be needed later during the operation of the
stack. These variables are part of 'struct bt_dev' and get updated
through the respective command complete handlers.
A new bt_hci_reset() API is added which allows an application to reset
the controller state at any time by re-running the HCI init procedure.
Change-Id: I5b1a38e910d79ad5fe806467bc51388eedc9c8f9
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a basic HCI driver registration API along with a fiber
to process data from the driver. A FIFO is used for receiving data
from the driver and waking up the respective fiber. To open and set up
the HCI transport for operation there's an open() callback passed to
the HCI core. This function will be called as soon as an application
initializes Bluetooth functionality through bt_init().
Change-Id: I780cca517a0dfc714f1ca35527e1c61e307345a0
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to manage incoming and outgoing HCI data (events, commands &
ACL data packets) we need to have some way of storing this into
buffers. This patch implements a 'pool' of buffers with the help of
the nano_fifo API. The pool is initially populated with all available
buffers. After this code can on demand request buffers from the pool
with the help of bt_buf_get() and return buffers back into the pool
with bt_buf_put().
Since we don't always know the execution context from where the API is
operated on, this patch also adds convenience fifo_get/fifo_put
wrappers that look up the exact context before calling the correct
nano_fifo API.
Change-Id: Ie7f6d450de865273171e21a000d5a14274d27d32
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For performing a basic HCI initialization procedure we need
definitions for the related HCI commands and events. This patch adds
these into separate hci.h header file. More content will be added to
this file as corresponding functionality gets added to other areas of
the stack.
Change-Id: Ida7555cb0a3d30b8a44324cb14699eba8a1bcdee
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To introduce the Bluetooth stack to the tree we need some additions to
the configuration options, as well as the very basic header files. The
patch also adds a skeleton for a bt_init() function that applications
will need to call to initialize Bluetooth functionality.
Change-Id: Ideb24dfea584b71f514e05eb47654b659776133e
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I56ee3d3ab6d1254359adcffa4d86c1bf2e20537a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idcd3b4dfd86b6e835638623fa7b39401cabdee06
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I0a807704a81b1faf4b79fe3832830c4994795fe3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5e774c9b78ace93049a41824cee0305ceb69228d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I8ad0774ad26836e193ed94165491e0bb1e6e9a0c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic81b4ad7edf476da61ae62df627866e0446714d7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I10a1bff593c56cf6703920b9feccd10e32cc65ef
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I413e59e0200c2b8eba1bee79e444b3492de8fb7c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifdfb9042ff4e83f6d7a8430d47c573b85eca9048
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iafa862861cc6b56212c036acc0bb182e2c620e7b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2e501394b7fa4264d9854659e2dd008e5c94b540
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iebefec0e02cbb838564dd71fd4424c1adbff31f5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1b3cb984fa75cd1a83649c81787a40aee97f8a32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Not only is the OBJ_NODE() macro unused, its name suggests
multi-node functionality.
Change-Id: I5967c03a0e526f63261d9b7e0e03b9f3bf01a1cd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_PrioCount is not used.
Change-Id: I21e4b929dd0bed097ff4453c4a1a02faab7d0019
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The mailbox count K_MbxCount is not used.
Change-Id: I9f1f7907ca5b966c3ff3bedff7a3318523d3a89f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The routine DefaultHostDriver() does not exist and it is not used anywhere.
Change-Id: I9b64bab9516f1ba4cc4b9f11b1958981206c9de6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The system node count K_NodeCount is both not used and irrelevant to a
single-node system.
Change-Id: If5b2b05d25c0ec2678962ae7ddc2b2dd292ac655
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The mutex count K_MutexCount is not used.
Change-Id: I7a51f2cbff1fc2b2bb628dfce22971d62d8d8821
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The semaphore count K_SemCount is not used.
Change-Id: Ia23d721d9790c34258c366b8b6ead135cd6eb289
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The fifo queue count K_QueCount is not used.
Change-Id: Id7b3cba2d1f58c070e895a1fd5de8e911e15a037
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol ppdrv is not used.
Change-Id: I5536d9924cca85a12547c866ef2cdbbe597f3710
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The host communication objects hostrxmbx, hosttxmbx and hostrxpool are not used.
Change-Id: I8ee4f62198625802ae526b4eaa46635810d78c3f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The MTS_xxx symbols are not used.
Change-Id: Ic24379d5027dc0be3dd898d024abe6cbf602410e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol _minik_stckp is not used.
Change-Id: I61c774c92d31a930264552d58a7f587ea2291866
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_TimerBlockPtr is not used.
Change-Id: I8421f1a690bf5a05970264696d8e0f8c347867f4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_ArgsBlockPtr is not used.
Change-Id: I0098e5a52324d116f0433b6e1fa6498b2f0520c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_DataBlockPtr is not relevant to a single node system.
Change-Id: I3c63b11063b7dcf4d3c7bfa155fdcf0e1ae35fc8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_TimerNall is not used anywhere.
Change-Id: I4289bf16699bcbf8733dec2ca40d9aa7003d1b42
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_ArgsNall is not used anywhere.
Change-Id: I5b5661ab26986960130ef51fd63936fa5c7dfb6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_DataNall is not relevant to a single node system.
Change-Id: I3203a9c72b6e5bb8f2719c4161fe753a3040c8d3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The symbol K_DataSize is not relevant to a single node system.
Change-Id: Ie57e0610520c5d43d3b8fa90f2a2685fc95ac668
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The host server channels are not used; their function pointers are always NULL.
Change-Id: I7616499f5695b83a015e6ee18c004aba96838d63
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ENABLE_DEVICE_CHANNEL macro is never defined. Furthermore, there are no
records about what it is supposed to do even if it is defined.
Change-Id: I6b9df005daebcd5af2ca4b3a9f98af8754d41488
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes a number of pipe related function declarations out of the publicly
available header file "microkernel/k_chstr.h". The removed function
declarations were already declared in the private header file "ch_buff.h".
Change-Id: I389b0b898cddfb9320831b94d85054e4cf9458dc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The files k_boot.h and flashboot.c are obsolete.
Change-Id: Ieab69e714462079c2a836dacb7c5bab53d2e3b2b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The TIME_TYPE bits are only unsed internally.
Change-Id: I5afb64a7492ee6defe79f4a570ab1ea119501b55
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The REQ_TYPE bits are only used internally.
Change-Id: I80df7c8a6498ab5624f234df190ffe61267076fd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The _z1arg structure is not used.
Change-Id: I6ff90aa5ea0d3e7a7dfdebf91e7806dd50075dd1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The _z2arg structure is not used.
Change-Id: I99c1617459ef1f9d9713fd62ed63173b95762654
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The _z3arg strcture is not used.
Change-Id: Ia4f243d57a1a0fc52bda18d3c0e95ad22489f26c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The _x1arg structure is not used.
Change-Id: Iba4a0727647bfe5e879684874207739206cfeb04
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The moved_req_args_rcv structure is not used.
Change-Id: Idc855b7bf5e5a6710ee995e935c1414700b59ca5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The moved_req_args_snd structure is not used.
Change-Id: Id8fc9142c3a52ad6815b237fc94e0277f6957fe0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The raw_data structure is not used.
Change-Id: I754875c4eb24502791537dbcafc53a6eb15ceb44
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'DataNode' field in the k_chproc structure is not used.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: If87a667953811772c918c12e1c03f8a5c6f7fafd
The 'srcnode' field in the moved_req structure is only relevant to multi-node
systems. Furthermore, with the absence of the 'srcnode' field, the routine
setup_movedata() requires one less parameter.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I00bbee2d78ef345a00399708215bd9e1ef5298d2
Since multi-node systems are not supported, the 'Srce' field now only serves
one purpose--to indicate whether the packet was allocated from the command
packet pool. As such, a better name (and type) for it is 'alloc' (of type
'bool') since 'Srce' (of type 'knode_t') suggest multi-node support.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I47a935af13fd55dbca23c879841d68caf895eae4
The 'destnode' field in the moved_req structure is only relevant to multi-
node systems. Furthermore, with the absence of the 'destnode' field,
the routine setup_movedata() requires one less parameter.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Ib5deb1369730ccd42ba25d8352d2365d404f9ed3
The 'Dest' field in the 'k_args' structure is only relevant to
a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I6942f503af6ebadd62a2bf10b2a3bd0c81850bb8
Changes the definition of CMD_PKT_SIZE_IN_WORDS from a hard-coded value to
one that uses sizeof(). This makes the system less brittle should the size
of k_args change.
Change-Id: If9ccb7f2a2a6d13bcf62eea3b0cf52942db0071c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine _task_mem_pool_move() is only relevant to a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I191e43f24aa56159a4c4669ff135beceade56284
Removes references to 'local' CPU from IRQ locking/unlocking comments. On
a single node system, the CPU must by definition be local.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I56297f01db82a2ed798a7d6b5cabf4c04950d15e
Move time calculation macros from application directory to kernel
directory, since it is used by a kernel component.
In order to follow namespace and naming conventions, convert
macros to SYS_CLOCK_HW_CYCLES_TO_NS* form.
Change-Id: I96e9149c399adc363aed5095ae82a1abc78d2977
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
When the exact scheduling context is not known it's convenient not to
have to spell out the context in the name of the *_fiber_start()
function. All of the fiber starting APIs map to the same _FiberStart()
implementation, so all we have to do is to declare another alias for
it.
Change-Id: Ic6862383422f89ad7dc4f401e76d610826163bb9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the exact scheduling context is not known it's convenient to have
a wrapper API that uses context_type_get() to call the right function
at runtime.
Change-Id: I02b2ac9039519468f5501571243426a6a57ffc4d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the exact scheduling context is not known it's convenient to have
a wrapper API that uses context_type_get() to call the right function
at runtime.
Change-Id: Ie72a4b78d53f664575c1d9dfeace52b53d018850
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The helper function _nano_start() is no longer required (due to the
recent relocation of boot banner and kernel build timestamp code),
so the kernel's initialization code calls _nano_fiber_swap() directly.
Change-Id: I06b9f473715afbfbdd4105b0def3445f1b2e3583
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The K_memcpyrpl() routine is not applicable to a single node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Ia778a6fc43e390a6c0478d641c206d2423a93c27
The K_memcpyreq() routine is not applicable to a single node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I6cdc056f4575099a8838f0bcf32e87479295452d
The K_remreply() routine is not applicable to a single node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I0e99a9db077d5625c981ed219461efa7c955072e
Boot ports are not applicable to single node systems.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I3512a5a0e2a2ba35d4e73a00d8329d301f2bd637
The header file k_boot.h does not need everything that "k_types.h" drags in.
It only needs "stdint.h" for the uint32_t type. This has an immediate impact
on "flashboot.c" as it was improperly relying upon the extra items that
"k_boot.h" dragged in.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Ib8bfbec52a1198846295d549091dc30bf041d97a
"NODEx.c" is no longer used. The correct file is "kernel_main.c".
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I62523b9181a446097ef3bd278553e097183ed307
Makes the _NANO_ERR_xxx error code values continuous.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: Iec0a5d0d6c54a94511a20608ba59626148baaca4
Add endian conversion functions needed for network protocols.
Currently Bluetooth needs sys_le16_to_cpu and sys_cpu_to_le16
to implement endian safe stack. Note that the OS is not guaranteed
to be endian safe generally.
Change-Id: If7faf9568e0f2b1817139a76d9b00888d5b7d76c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit changes the pointer's location in order to comply with
the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Ibcf1ef0e4fc53b0cb5286b36119e76d017f24cd9
This commit deletes spaces after open parentheses '(' and spaces before
close paratheses ')'.
This modification were done with the following script:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces after open parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited after that open parenthesis '('" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/\([ \t]*/\(/g }' $file;
done;
# fixing spaces before close parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited before that close parenthesis ')'" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/[ \t]*\)/\)/g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I4482fc50ec45542afa2e60c5f2fef4e75fb24dd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>