This patch provides initial support for the SoC STM32F107. This SoC
belongs to the Connectivity Line devices.
Connectivity line family incorporates up to 14 communication
interfaces such as: 2 x I2C, 5 x USART, 3 x SPI, 2 x CAN, USB 2.0,
10/100 Ethernet MAC.
Change-Id: I5cb2c458bce9ec1558b4168e87a7003ad9f606a5
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all the ksdk/mcux shim drivers use the config HAS_MCUX, we can
remove the config HAS_KSDK.
Change-Id: I94b7db41efae10c9234681aeb57f94e67a33c262
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the ksdk random generator shim driver to mcux.
Change-Id: I8bc376937fed3024c809782139a0a72c7332f89a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the Kinetis SDK (ksdk) to the MCUXpresso SDK (mcux) to reflect
the recent rebranding by NXP to include support for LPC and i.MX SoCs.
Temporarily leaves the config option HAS_KSDK to allow renaming each
shim driver in a separate commit.
Change-Id: I738f3687755fcd429a105e723fa25f1da815b519
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes unnecessary CONFIG_ETH_KSDK project settings from the net
samples. Some of the configs no longer exist (MAC0-2), some are not
valid (MAC3-5) due to RANDOM_MAC=y, and the rest are already enabled by
default by the SoC and board.
Change-Id: I27079b8bb142ebc507885f3b1de07e282c813506
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The ksdk pinmux dev driver was previously merged into the regular ksdk
pinmux driver, and the config PINMUX_DEV_KSDK was removed. Two
references were inadvertantly left behind, so remove them now.
Change-Id: I77394be5459d55a9f16e7bd2b3c9d688c4605b4f
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
stm32f411re SoC could run at system clock above 84MHz.
This was not taken into account in __setup_flash function which configure
flash latency depending on system clock. This is now corrected.
Assert added to ease error detection.
Change-Id: I49b92256d611ef464171fb1d8812a4c4d3c27ab8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide USER button and LD2 Led defines in order to get basic samples
"blinky" and "button" available on nucleo boards.
Defines have been named in order to match with board printing.
Aliases are provided to get compatibility with zephyr sample code.
Change-Id: Ie23a4f63c406def50b94a644d4e136d3bda1ceff
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Previously, CC3200 drivers had two options to use the peripheral
driver library APIs:
1) Build driverlib SDK files in Zephyr, in ext/hal/ti/cc3200/*
2) Link directly with the driverlib.a, from an externally installed
TI CC3200 SDK.
A new option is added to replace option 2), and is now the default:
3) Use the driverlib functions already provided in ROM.
This enables a savings in code size, which will depend on the
types of device drivers configured and the number of SDK
APIs actually used.
A rom_report build of the shell sample application showed
a savings of about 2kb in code space using this new config option.
Change-Id: Ie1ede6f7aacd23db20f5292e776f1dfeab5c7fe0
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The cortex-m7 is an implementation of armv7-m. Adjust the Kconfig
support for cortex-m7 to reflect this and drop the unnecessary,
explicit, conditional compilation.
Change-Id: I6ec20e69c8c83c5a80b1f714506f7f9e295b15d5
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged that conditional compilation hanging
on CONFIG_CPU_CORTEX_M3_M4 provides support for ARMv7-M, rename the
config variable to reflect this.
Change-Id: Ifa56e3c1c04505d061b2af3aec9d8b9e55b5853d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged all conditional compilation hanging on
CONFIG_CPU_CORTEX_M0_M0PLUS such that it actually represents support
for ARM ARMv6-M, rename the config variable to reflect this.
Change-Id: I553fcf3e606b350a9e823df31bac96636be1504f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The ARM code base provides for three mutually exclusive ARM
architecture related conditional compilation choices. M0_M0PLUS,
M3_M4 and M7. Throughout the code base we have conditional
compilation gated around these three choices. Adjust the form of this
conditional compilation to adopt a uniform structure. The uniform
structure always selects code based on the definition of an
appropriate config option rather the the absence of a definition.
Removing the extensive use of #else ensures that when support for
other ARM architecture versions is added we get hard compilation
failures rather than attempting to compile inappropriate code for the
added architecture with unexpected runtime consequences.
Adopting this uniform structure makes it straight forward to replace
the adhoc CPU_CORTEX_M3_M4 and CPU_CORTEX_M0_M0PLUS configuration
variables with ones that directly represent the actual underlying ARM
architectures we provide support for. This change also paves the way
for folding adhoc conditional compilation related to CPU_CORTEX_M7
directly in support for ARMv7-M.
This change is mechanical in nature involving two transforms:
1)
#if !defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
2)
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#else
...
#endif
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
#else
#error Unknown ARM architecture
#endif
Change-Id: I7229029b174da3a8b3c6fb2eec63d776f1d11e24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The cortex-m related memory map definitions in memory-map.h are all
CPU specific. In preparation for replacing
CONFIG_CPU_CORTEX_M0_M0PLUS with CONFIG_ARMV6_M and
CONFIG_CPU_CORTEX_M4_M4 with CONFIG_ARMV7_M, adjust memory_map.h
conditional compilation to hang on CONFIG_* variables for specific
cortex CPUs.
Change-Id: I2af0b75eaa5b16f88836dbdae41446beacaeba71
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Adjust the layout of various ARM assember files to conform to the norm
used in the majority of files.
Change-Id: Ia5007628be5ad36ef587946861c6ea90a8062585
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Merges the ksdk pinmux dev driver into the regular ksdk pinmux driver,
which now exposes the public pinmux API. Removes the private ksdk pinmux
API and converts the frdm_k64f and hexiwear_k64 boards to use the public
pinmux API.
Jira: ZEP-958, ZEP-1432
Change-Id: Ie5f60b604133093050b9c596050cad776d7b7cb3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable PORTD on the frdm_k64f only if SPI_0 is enabled. Otherwise, there
are no pins in the pinmux table for this port and it should be left
disabled.
Change-Id: I7f8a05552f6a320debfd11a780be1092da831101
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Disable PORTA and PORTB by default on the hexiwear_k64 since there are
no pins in the pinmux table for these ports. Enable PORTE only if UART4
is enabled.
Change-Id: Ifdb01cacf0c475a9478454eb61474a930e22a628
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adds the documentation page for the ARM V2M Beetle board into
the Zephyr tree.
Jira: ZEP-1300
Change-Id: I4f2fd9a4e496c0a674272f94bedcadf3c71d9971
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For some of our samples/test we disable all console support, yet enable
BOOT_BANNER in tests/include/test.config, this can generate warnings
like:
warning: (BOOT_BANNER && BLUETOOTH_DEBUG_LOG && BLUETOOTH_DEBUG_MONITOR)
selects PRINTK which has unmet direct dependencies (CONSOLE_HAS_DRIVER)
So having BOOT_BANNER depend on CONSOLE_HAS_DRIVER cleans things up.
Change-Id: Ia6a6348fc08b0808ea6eaedb8c8833507f82c702
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get odd warnings associated with Kconfig because of this:
warning: symbol value '0# empty for now, use this file for global kernel
configurations and overrides.' invalid for CLOCK_STM32F4X_APB2_PRESCALER
Change-Id: I77c2828ab29dfa179f345953cc490dbd67fd0b5a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This trick was pioneered in Linux as the config_enabled() macro. The
madness has the effect of taking a macro value that may be defined to
"1" (e.g. CONFIG_MYFEATURE), or may not be defined at all and turning
it into a literal expression that can be used at "runtime". That is,
it works similarly to "defined(CONFIG_MYFEATURE)" does except that it
is an expansion that can exist in a standard expression and be seen by
the compiler and optimizer. Thus much #ifdef usage can be replaced
with cleaner expressions like:
if (IS_ENABLED(CONFIG_MYFEATURE))
myfeature_enable();
Change-Id: I40657d2aa3f802429ac33675a1fe245a5da86615
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fixes the following warning:
warning: override: reassigning to symbol UART_CONSOLE
Change-Id: I09805bdfa31146faf276ca4ec06487a5d71cdff5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A few CONFIG options got set twice in sensors_n_z.conf, remove the
duplicates as we get warnings associated with this:
warning: override: reassigning to symbol GPIO
warning: override: reassigning to symbol SENSOR
warning: override: reassigning to symbol SPI
warning: override: reassigning to symbol SYS_LOG_SENSOR_LEVEL
Change-Id: I7a723218db8e365bdb45c004e93bd2c4f55ab5ac
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
select is more intuitive and easy to remember, and it is shorter too :)
Change-Id: Icc79e5cb88163344c1e2fcf65e313c33c4afa2cc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ICCM memory, when present, can be both written and read,
so changing the attributes to be read-write-execute.
Change-Id: I432bd36f4a6ef632b7c4ce3bf8aa138895d52642
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
I've moved the call for icache_setup from nanoArchInit() to
_PrepC(), because there is a lot of code executed now before
nanoArchInit() is called, and all this time the i-cache would
be off. It should be turned on as early as possible to make
initialization faster.
Change-Id: I76a809d57a1bf9aacf51e7bb9fe8c8425f37aa13
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The main, idle, interrupt and workqueue call stack definitions are not available
to applications to call stack_analyze() on, but they often require to be
measured empirically to tune their sizes in particular applications and
use cases.
This exposes a new k_call_stacks_analyze() API call that allows the
application to measure the used call stack space for the 4
kernel-defined call stacks.
Additionally for the ARC architecture the FIRQ stack is also profiled.
Change-id: I0cde149c7366cb6c4bbe8f9b0ab1cc5b56a36ed9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch moves pwm driver samples to samples/basic and also convert
documentation of PWM samples to RST.
Jira: ZEP-1536
Change-Id: Ib2b3ff8b1722a26618e9a6fe416e2138d82ca28b
Signed-off-by: Punit Vara <punitvara@gmail.com>
Includes for HCI drivers are found in include/drivers/bluetooth/.
Change-Id: I80ef8c60aa972f0f4d625c998dac5a3896fb2ab4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This had been erroneously reported as a build error.
Issue: ZEP-1460
Change-Id: Idddaf833011beb1165bd766dd115c021c5b90cdf
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-add board documentation and integrate into the project online
documentation.
Setup sphinx to pick any new board documentation added to boards/*.
Change-Id: Id208d5ef923f8806135879dd33a55ed527dc5f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These samples/tests fail to build on some of the nRF5x platforms. We
don't need Bluetooth enabled for these tests so we can reduce footprint
by turning it off.
Change-Id: I87e62a1d70f80d2bc22414d6a9e591e36ad9fa06
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The 16k RAM nRF51 variants pose a challenge to get applications to fit
within the available memory. Make the default ISR stack size smaller
than the previous 2k default, but big enough to run fully functional
Bluetooth controller and host stacks.
Change-Id: Ie7c5bb21a3ba620d283e6228a2482d280f85119d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
RAM size has increased on arduino_101_ble which causes it to no longer
be able to build test_controller_dbg.
Change-Id: Iab8ed2857db23d048cfa6b04e2d1fea31efbb13c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
