references to pdf files (e.g.,
www.st.com/resource/en/reference_manual/dm00091010.pdf)
were missing the http:// prefix so looked like a relative reference.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding 'config POLL' in Kconfig.defconfig creates a dependency
between CONFIG_POLL and board BOARD_DISCO_L475_IOT1 & SPI.
Remove this definition from the file and set CONFIG_POLL
in board _defconfig file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In flash driver init, write_block_size could be initialized
with FLASH_WRITE_BLOCK_SIZE which is generated from device
tree parsing (dts property: "write-block-size")
Fixes#5305
If not defined, generate a compilation error.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
By default CONFIG_MPU_ALLOW_FLASH_WRITE=n so the example must have been
falling on any write to flash.
This patch adds CONFIG_MPU_ALLOW_FLASH_WRITE=y to project configuration.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This sample implements a custom module, so rename it to allow for other
samples with specific features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename tasks -> threads, task was the common name for threads before the
unified kernel was introduced.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This check is needed to not schedule the delayed work if current
message to be sent is the last heartbeat message.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The timer should be reset before sending to ensure correct
publication period.
This patch allows to pass MESH/NODE/CFG/HBP/BV-02-C.
This patch is ported from mynewt:
Commit: d4b84638df47e7ea21629e6919f547f5dcd47285
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In Qemu 2.10 we can run this board configuration in Qemu directly. Make
this possible by setting the board configuration to allow emulation.
Until we have the latest QEMU in the SDK this can be used with a recent
QEMU like this:
$ mkdir build; cd build
$ cmake -DQEMU=/usr/bin/qemu-system-arm -DBOARD=mps2_an385 ..
$ make run
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some boards are supported natively by qemu. This option will allow us to
run tests using those platforms directly without having to go via a
dedicated qemu board definition.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The library has incomplete tracing support. Given that we are not a true
kernel object, remove support instead of fixing it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to be able to document the build on Windows and UNIX
systems, slight variations are required on the app commands
that are used throughout the documentation system.
This includes getting rid of the prompt symbol and providing commands
for both UNIX and Windows operating systems.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since QEMU currently requires Linux or macOS to run, use "unix" as a
host OS for those documenting the build with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to properly support documenting building on both UNIX and
Windows, a new "host-os" option has been added to the Python script,
alongside with a switch to ninja as the default generator.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since we're switching to ninja as a default generator for CMake, require
the ninja package as part of the requirements on macOS.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
* arc MPUv2 is only available in em7d em starterkit version 22.
Add a default config for this to simply the config.
* The change of board version in menuconfig, e.g, version 23 to
v22, will not cause other options depending on board version
change automatically, users still need to change these options
manually. This is another reason to need a new default config file.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Refering the ARM's implementation, the initial support of memory
domain in ARC is added:
* changes in MPU drivers
* changes in Kconfig
* codes to configure memory domain during thread swap
* changes in linker script template
* memory domain related macro definitions
the commited codes are simply tested through
samples/mpu/mem_domain_apis_test.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
if we are using command line platform filter, no need to list every
other platform as excluded, we know that already. Show only the
discards that apply to the selected platforms on the command line
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we load tests from a file, we do not have the discarded list, this
would have been done already when saving the test file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most boards enable the pinmux by default by setting CONFIG_PINMUX=y in
<board>_defconfig, but several boards did it in Kconfig.defconfig
instead. Several code reviews, such as #5043, have suggested using a
select in Kconfig.board to enable the pinmux, however this caused
warnings:
warning: (BOARD_LPCXPRESSO54114) selects PINMUX which has unmet direct
dependencies (BOARD_FRDM_K64F || BOARD_FRDM_KL25Z || BOARD_FRDM_KW41Z ||
BOARD_HEXIWEAR_K64 || BOARD_USB_KW24D512 || BOARD_GALILEO)
Fix how these boards enable the pinmux so they are more consistent with
other boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Running this testcase on qemu without userspace enabled it
crashes. The testcase was modifing page table information
of the bss region. This in turn caused some variables to be
inaccessible. Fixed it by moving the page manipulation to a
different location.
GH-5646
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
$ENV{ZEPHYR_BASE} was recently search-replaced with ${ZEPHYR_BASE},
but some CMake code, like usage.cmake, is run by a seperate CMake
build system that does not have access to the CMake variable
ZEPHYR_BASE.
This patch reverts the usage of ${ZEPHYR_BASE} back to use
$ENV{ZEPHYR_BASE} in usage.cmake.
This has been proven to work on both Windows and Linux.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Actually set Zephyr's default DNS server based on the corresponding
DHCP option received. This makes DHCP-based setup Zephyr complete:
now it's possible to connect Zephyr DHCP-enabled system to a typical
router, and it will fully auto-configure to access Internet.
This initial implementation uses just first DNS server address as
returned in DHCP message, it may need to be extended in the future
based on the need.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit refactors the nRF5 radio driver of Bluetooth controller
to use symbolic names for PPIs. It also revisits the Radio hardware
timing constants to align with experimental measurements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add configuration for zperf sample allowing to build USB dongle with
zperf for testing.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
