Tested on nrf52_pca10040 and nrf51_pca10028 using hello_world sample.
Change-Id: I7cdf1d21e7f8232da737a06e5afbfb1eaec05cde
Signed-off-by: Michał Kruszewski <mkru1992@gmail.com>
At present 'make flash' target for boards that support flashing with
OpenOCD works only with Zephyr SDK. This patch enables flashing
without Zephyr SDK as long as openocd itself is installed.
Change-Id: I4594d795225e54b7638839d590e4c0620f9ca88c
Jira: ZEP-1893
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Only the IRQ prasing was using cell_prefix and cell_string does the same
thing so lets just use that everywhere.
Change-Id: I2ef9b1e2c1baef54b71d811c835b29a9ca8fe81b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Flashing the Arduino 101 board over DFU can be tricky: the
dfu-util command line is cumbersome, and the reset button
must be pressed at the right time.
This script brings the convenience of 'make flash' for the
Arduino 101 board and for other boards that support the DFU
protocol. It checks whether the board is in DFU mode, and
prompts the user to reset it when needed.
The dfu-util command line is constructed from the following
environment variables, to be exported from the Makefile:
- DFUUTIL: path to the dfu-util executable, default: dfu-util
- DFUUTIL_PID: vendor_ID:product_ID of the board in DFU mode
- DFUUTIL_ALT: alternate setting name of the DFU interface
- DFUUTIL_IMG: path to the binary image sent to the board
Change-Id: Ia9577ec96102a92d4c60481f980f30f4f6e7cd9e
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
This is a corner case that barely hits and thus we had not seen it
before.
Change-Id: Ie1420a4c866834e5a233985c6b8a19643426a1f5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Adjust the checkpatch script to recognize the volatile keyword as
forming part of a declaration. This prevents inappropriate checkpatch
gripes for patches such as:
https://gerrit.zephyrproject.org/r/#/c/10345/
Change-Id: Ia29a9002bb9ef15f747d29231d938ae12790724d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
We default DTC to /usr/bin/dtc so we can build targets that are using
devicetree and not using the zephyr SDK (which provides a version of
dtc).
Change-Id: I84c3e3181eda75b4da715e16bbde2e67f28785e7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the hardwired #! python path with a PATH search. This is
necessary to allow build tools to execute from a virtualenv.
Change-Id: Ib83131fd96656bc9f76c606356b1f92c877cc117
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
By convention Kconfigs are in all uppercase, but not strictly
required to be so. Currently the Xtensa build defines
CONFIG_${XTENSA_CORE} which can have lowercase letters. This
is marked for cleanup in ZEP-1711.
Issue: ZEP-1711
Change-Id: Ia901ea1688202129f1629001a77f498522859f14
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This toolchain Makefile defines CC/CXX directly so we need to add
a USE_CCACHE case here.
Change-Id: Iee8dc6ab030db8dc45b16e21c5b17864e51341b4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A ctrl-c in the script wouldn't terminate the child process.
Only do the pid trick if we're communicating with sanitycheck over
pipes.
Change-Id: I79da7362958b5fac00defd74d4b709076085575b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Manu command lin eoption are not supported by xt-c++. There are filtered out
when calling Makefile.toolchain.xcc.
Change-Id: I1e60843d2b23f90250fbb493487c6fc838b7485a
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
If passed after the file they are just ignored silently!
Change-Id: Ic9b04c3023e4d312382850fa5e1b5ae4ef555856
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
When current directory is a symbolic link or in a symbolic link then os.getcwd
return the real path leading to os.path.relpath returning not so nice relative
path.
Change-Id: I3e24d3e6f1fe7185992f64803d3728e9588d67e1
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Sanitycheck actually creates the pipes, using a naming convention imposed
by QEMU. We also need to leave a PID file.
'xt-run' Make target removed, we don't need it.
Change-Id: Ie9fd9dbb1327eb4b10424e7ee5d2f4dc09b121a4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows handling options like --fatal-warnings that are passed by
sanitycheck.
Change-Id: Ia78dcef480d9d81cab6051453204c05d52917af2
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This completely breaks all the cc-option checks. It's not clear
why this was done for everyone running sanitycheck.
Change-Id: I3f944423869ccb15fab29c28130820a93cd94917
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In scripts/Makefile.qemu, the target qemu is already an alias for taget run.
In scripts/Makefile.xt{,sc}-run there is no target qemu but a target run.
Change-Id: Ib9dce3561ef9367b17d30070354e709df4d7e528
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
XCC does not recognize __builtin_unreachable() and thus cause a link error.
Change-Id: I5dadf5a49d971d5e0a5ef88d582bb5ad2c36bced
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
These libraries are unlikely to be uesd by GCC port and thus should not be in
a generic make file. Moved to specific toolchain make file.
Change-Id: Ib585b87700e409d678f7a5cb60cff67b6022ab05
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use this configuration file with the uncrustify tool to fix style
issues. the configuration should apply the zephyr coding style on
source code files with a few minor excrption. Do not take the output for
granted, always check for correctness after running.
To use, for example:
uncrustify --replace --no-backup -l C -c $ZEPHYR_BASE/scripts/uncrustify.conf
This will do the changes inline.
Change-Id: Iecfd2e10bc7e475ca83de0d921ebb5d72156d286
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many users set USE_CCACHE=1 in their envionment. Sanitycheck was
disregarding that and placing USE_CCACHE=0 in the generated
Makefile unless --ccache was added to the command line every time
it was invoked.
Issue: ZEP-1663
Change-Id: Id3c1379f5039d4d2f4a3ae01d2ec8d0dd216f523
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As decided during the Zephyr Mini Summit in December 2016, we're going
to use the same Device Tree format as used by the Linux kernel to store
device configuration from vendors.
This is a parser written during the summit that will parse *.dts files,
and will be used as part of the solution to read in the files provided
by manufacturers and generate board configuration files.
The script will also optionally generate files in the DOT language so
that DTS files can be graphed using the Graphviz suite.
Change-Id: I6e2b7a64a6dcc349b2888332a660b4700af6cd63
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds initial support and documentation for the frdm_kw41z board.
- Configures the kw41 to use the 32 MHz external oscillator on the board
to generate a 40 MHz system clock. The clock settings match the MCUX
SDK hello_world example project.
- Provides pinmux settings for the uart, i2c, LEDs, and switches
- Enables pinmux, gpio, uart, and i2c driver instances
- Configures the fxos8700 accelerometer/magnetometer driver
Jira: ZEP-1390
Change-Id: I025a0eae3d380eaf90b02683acf5c592e2204a2e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 9fb0c2af5c.
SDK 0.9 has now been released.
Change-Id: I676b6f0e31ab48fde3dda41b681abf53964ea9f9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The 0.9 SDK is not released yet!!
This reverts commit 7995e6207c.
Change-Id: I550d1aa27ba7a06ff2cda09496ceb92645a17460
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce support to tag some issues as warnings, that can be printed
but not considered errors.
Added the ability to write the errors and warnings to split files, for
later reporting.
Added a more consistent help.
Change-Id: Ia75430c3337385afca59595437168ab643c92911
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
ARM's Cortex-M Prototyping System (MPS2) is a board with an FPGA that
can be programmed with different 'SoCs'. To use these in Zephyr we need
a set of board files for each variant.
This adds a board for a variant which implements a Cortex-M3 CPU; the
naming of this matches that used for the Zephyr SoC (which is itself
based on ARM's documentation nomenclature).
Change-Id: Ie02a67a03016b8aeee31e3694f0edbcc37f9ee64
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Values now spaced 4 apart since we commonly build thousands of
tests.
Percentage complete indicator added.
Change-Id: Ia7454dc1e8cc0701dc74dc8a4f6e7a37706524e8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were causing some issues in the old kernel, but the unified
kernel no longer uses these.
Issue: ZEP-513
Change-Id: I87216565231cd244886fbffe4b4d420d1687b245
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Compiling Zephyr with an external riscv32 toolchain would
require the following env variables to be exported:
export ZEPHYR_GCC_VARIANT=riscv32
export RISCV32_TOOLCHAIN_PATH=/PATH/TO/TOOLCHAIN/BINARY
Change-Id: I2072ed9079a4cabd27837ab39b947bc0a0a1a8b4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
At least one Linux distribution (Arch) has made python 3 the default
interpreter, and Debian and Ubuntu have expressed a desire to eventually
make this the case. As such, invoking 'python' or '/usr/bin/python'
will possibly run python 3 instead of version 2.
Distributions have included a 'python2' link for quite some time now,
and given that we have some scripts that require python 3, we should be
explicit about those that require python 2.
In addition, be more consistent about how python is invoked, preferring
the:
#!/usr/bin/env python2
construct rather than a hardcoded path to python. This allows the user
to have an alternative python in their path that will be used in
preference to the system provided version.
Jira: ZEP-1548
Change-Id: I125c2af808dc268f74277bc97a092df3acad23c0
Signed-off-by: David Brown <david.brown@linaro.org>
This had been erroneously reported as a build error.
Issue: ZEP-1460
Change-Id: Idddaf833011beb1165bd766dd115c021c5b90cdf
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running a reduced set of tests with --platform-limit or using the
default of 1 we build the configuration (make initconfig) for all
platforms, although we are only interested in a limited set. On my
machine this is 100s of build time for configurations we are never going
to use.
This reduces the number of builds to what we really need and speeds up
sanitycheck runtime overall.
Might need a few more optimisations.
Change-Id: I813fabf1453f19ce7a83b28e4792b5c80616d936
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various changes required by new SDK 0.9:
1. Renamed toolchain vendor name ("poky" -> "zephyr")
2. Toolchains now 64 bit, previously 32 bit
3. New toolchain for Xtensa
4. New toolchain for RISC-V
0.8.2 is still supported.
Change-Id: Icfd4cc44ef643da0f3840b33d6dfc4b3c99dfa9a
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently CI plays tricks with `tee` to capture the output and post
process it. This makes it more complex to handle and easier for it to
fail in ways it should not.
So add a simple log capture option sanity check that mirrors the
stdout output, removing color encoding for errors.
Change-Id: I6de0b6cfe4da9c289f537979545dddbcd49cf834
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This reverts commit 4e2cf33d9d.
The change does not work correct if we have a filter and specify a
specific platform, such as:
./scripts/sanitycheck -p 96b_nitrogen -i -s samples/hello_world/test_singlethread
Change-Id: I43a4f25ed25c8fe5379cda23b6dbfa8f9ae5cb0d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When running a reduced set of tests with --platform-limit or using the
default of 1 we build the configuration (make initconfig) for all
platforms, although we are only interested in a limited set. On my
machine this is 100s of build time for configurations we are never going
to use.
This reduces the number of builds to what we really need and speeds up
sanitycheck runtime overall.
Might need a few more optimisations.
Change-Id: I53d6bacf66045dde7baabbaa40b4fbfc4a01782a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added sanity args to be used by the compare footprint.
Please notice that compare footprint use sanitycheck to
build footprint apps for base commit and for current commit.
This in order to collect the information and generate the diff.
Change-Id: I6f86bbfa020999b3f26e93a608fc7b34ee508e10
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
With the appearance of the nRF52840 IC a new Preview Development Kit
(PDK) board has been introduced. This patch adds basic support for this
new board.
JIRA: ZEP-1418
Change-Id: If5845e75312ec756b968e595e5dc31c4c9624be2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch does not apply anymore. A patched qemu already exists in the
SDK.
Change-Id: Iee18550a7b9288a1db2a6ecc4378ff554b240229
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for the Nucleo64 L476RG development board.
Change-Id: Ibb5424bc936c67a5d96855617202136d7dea772c
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The macro defines the stack as usual, but if user has
enabled net shell (CONFIG_NET_SHELL), then additional
information about the stack is stored in net_shell
linker section. The information in the net_shell linker
section is then used to print information about the
stacks in the networking sub-system.
Change-Id: Ic6e9f16a73a192b9a59d32a6d0070322382f98bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to store the nbr pool data into a dedicated section
as we have only one nbr pool defined.
Change-Id: I6f2afcce57b5f588878496bf085567b938e32c80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We missed that section, so sanitycheck was failing.
Also putting the right section in the relevant array.
Change-Id: I361ffa1707c01f0d3c870a7bc36a86ada66af1d2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without these, test case will fail miserably.
Change-Id: Ib46d167b8782c33362ac6edb9d8c50abc25908c0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
getenv() returns an string of unknown size, so Coverity warns that it
might be used to overflow the stack in the call chain off
conf_read_simple().
To avoid that, wisdom says copy to an string of known size and pass
that.
Change-Id: I9e468de0ae66429062027f58fe0a0a4e1197218f
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
(cherry picked from commit 0307d6ea5fa361abe5c9fb1872f9dc8256208ee0)
Added new option to make sanitycheck script error on deprecation
warnings, to use:
sanitycheck --error-on-deprecations
For example, to find usage of legacy APIs in master, run the following:
sanitycheck -e legacy --error-on-deprecations
Change-Id: Ib83c266c8357475840dea03d62ceefed72b73f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running --only-failed make sure last_sanity.csv exists.
Change-Id: I862529a58f337987c37da83fd5541dd4f42b3391
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In windows systems the rename() function fails if the new name
of the original file corresponds to a file that already exists.
The fix removes the new file before renaming the original one.
Jira: ZEP-980
Change-Id: Ib3a43db86c0dd3fabb592f53ea7619eb5738bb65
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Coverity reported 150819 issue, which steams off Flex generated code
from zconf.l in which sprintf() was use. Because of that, the
conf_read_simple() @name parameter could be used to overrun
zconf_open() @fullname by crafting SRCTREE and KCONFIG_ALLCONFIG
environment variables.
Change-Id: I2cff817dccafe0e06b35636bbb7be95e062410af
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Update file to catch any regressions and major changes during
stabilisation period.
Change-Id: Id30dd1827034b96c5478c78f9c388384f51bcbec
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Right now the build system builds the host tools over and over again, in some
environments especially when running in an IDE on windows for example,
this is not desired and a set of pre-built host tools should be used.
Provide an option to use pre-built tools instead of building them
from source.
To use, set PREBUILT_HOST_TOOLS to the path where all pre-built host tools
are hosted. To get a prebuilt version of the host tools, build without the
variable set and copy the generated host binaries from outdir. The following
tools are supported:
* conf
* fixdep
* gen_idt
* gen_offset_header
Jira: ZEP-237
Change-Id: Iea505bfd0b50f851ee2781b5117bb6085ab20157
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for ARM V2M Beetle platform.
ARM V2M Beetle board is build around the ARM Beetle Cortex-M3
based processor.
The support has been tested in nanokernel mode with the bringup
application that will be pushed with a future patch.
Jira: ZEP-1245
Change-Id: Ib05a40c072f10149e692283177387cf2cfe32f66
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from
the Linux kernel.
Change-Id: Ie2cabbfea415d26ffacef340d9497342b496dc29
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 0c9152d42d.
This was not ready for merge yet.
Change-Id: I08f69e27929867606bc58cdeffed6540725069a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from the Linux
kernel.
Change-Id: I6314dd41eb200c87cdcc6f212f13d3351128de0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Quark SE C1000 BLE Core is a nRF51822-QFAA, with 16kB of RAM and
256kB of flash. The configuration is otherwise similar to the Arduino
101 BLE, except that the UART RTS pin is the same as that used by
nrf51_pca10028.
Change-Id: I88cb18876bdde65abcf9a499894f70802046c824
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Similar to C subdir-ccflags, enable similar C++ variable subdir-cxxflags
Change-Id: I4355817bc2d6a80a3eebba9b87fbf54725dda5e7
Signed-off-by: Sakari Poussa <sakari.poussa@intel.com>
sysgen will also now re-run if the build system detects that
the script itself has changed.
Change-Id: I2bf5c4893da088fa27729bc6337bc66cc4cee341
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added Kconfig and makefiles to be able to build a Zephyr application
on Linux/gcc, and load via OpenOCD.
Validated by running the hello world, and philosophers microkernel
samples, and stepping through the code in gdb.
Jira: ZEP-1109
Change-Id: If5d3e7b1a8ecf5ecf6a00f147742b3bc5716190f
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Sysgen was still generating the TICK_EVENT event needed for the
microkernel system clock timer driver in the unified kernel. That ended
up dragging in alerts all the time, which in turns drag in the system
work queue, which drags in the work queue, which drags in FIFOs.
This shaves 1052 bytes of RAM and 860 bytes of ROM in systems that don't
need these components (on x86 with IAMCU).
Change-Id: Ica56857da2b6444181f10e83f6c986d092aa967b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Now that these platforms pass sanitycheck add them into the list of
platforms we support
Change-Id: If559c80e107505e6b98f81c0e94b9862618b1735
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enhance the linker script so that all statically-defined kernel
objects of a given type are co-located.
Note 1: This capability is needed so that static kernel objects
can be added to the associated object tracing list. (Some kernel
object types are already co-located to permit the kernel to do
other initialzation on statically-defined objects.)
Note 2: A follow-up commit is needed to ensure statically-
defined kernel objects are placed in the sections referenced
in the linker script.
Note 3: The legacy script info remains for now to allow
applications using the microkernel or nanokernel to continue
to build.
Change-Id: I40d831f9e183fb121c950e30fa8298b6d529375b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit:
commit f25ac092b9
"Makefile: Restructure for multilibs"
breaks external HAL library linking, by overriding, in the
the second Makefile pass, the LIB_INCLUDE_DIR variable
set in the first Makefile pass from ext/hal Makefiles.
This breaks use of the CONFIG_CC3200SDK_LIBRARY=y option in
the cc3200 SDK, and also likely the QMSI ext/hal/qmsi/Makefile,
when CONFIG_QMSI_LIBRARY=y is set.
This commit just changes the '=' to "+=".
Jira: ZEP-1163
Change-Id: I1aaaaee57378dcd01ab6f2ed4799281b2337eea2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Allows event objects to pend signals in a cumulative way using
the semaphore in a non-binary way.
Jira: ZEP-928
Change-Id: I3ce8a075ef89309118596ec5781c15d4f3289d34
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Before, the kernel would run the main() function twice; first
as an entry in k_task_list, and then again from _main(). The
_main() invocation would be using a potentially insufficient stack
size.
Now if an MDEF file declares a main() thread, invoke it from
_main(), but honor the desired priority and stack size.
Issue: ZEP-1145
Change-Id: I1abf38fc038e270059589b11d96fae1b3f265208
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a ccache option to allows enabling the use of ccache for builds
generated by sanitycheck.
Change-Id: Ia997ed29f38a3d2d71ba143456e6fcbc5946d56e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
commit 018b831a36 keeps another elf file in the
outdir which confused the sanitycheck script.
Change-Id: I87a9bcee6afe6526ecc24f1f5d9cf38101247ce2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
build footprint test as part of the main sanitycheck job, we do not run
the script comparing footprint anymore, it will move to somewhere else.
Change-Id: I36d475bfc3d985bf06a872649eae8c19e1a43aa4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This directive is the default, no need to have an ever-expanding
enumeration of these.
Change-Id: Ic5147fe04de033cb7e97fc5cbe45edd1779d1120
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BLE core on the Arduino 101 is an nRF51822 QFAA (256kB flash, 16kB
RAM).
Change-Id: Ia802b3eb634c0cd6775c4059c9569bccd915a578
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This script is part of the CI job and currently is run on all defined boards.
We are limited on resources in the CI infra and this part is taking way too
much time. We now select a group of boards to look at instead of just building
everything.
Change-Id: Ifd634e74426c9cc801032b26ad9a9a94a0e55960
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With this patch we introduce unified kernel support for NIOS II.
Not all test cases have been ported, but the following command
currently succeeds with 43/43 passing test cases:
$ sanitycheck --arch=nios2 -xKERNEL_TYPE=unified \
--tag=unified_capable
Issue: ZEP-934
Change-Id: Id8effa0369a6a22c4d0a789fa2a8e108af0e0786
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This fix sanitycheck for apps that specify unified kernel.
Change-Id: I3f1c4d5a566f6833e56bbda097cb497ccdbfbec9
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Python module argparse has a feature to load arguments from a file.
This commit enables such feature on sanitycheck script so files
prefixed by + (plus sign) are loaded during argument parsing stage
and included as arguments to such script.
Jira: ZEP-122
Change-Id: Ibb0a6e8464218a4f58ce4044a5a0860dc5b32480
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Fleshes out the prototype heap memory pool support
to make it fully operational. Noteworthy changes are
listed below:
Tweaks arguments to k_malloc() and k_free() to be more like
malloc() and free(). Similarly, modifies k_free() to take
no action when passed a NULL pointer.
Now stores the complete block descriptor at the start
of any block allocated from the heap memory pool. This
increases memory overhead by 4 bytes per block, but
streamlines the allocation and freeing algorithms. It also
ensures that the routines will work if the block descriptor
internals are changed in the future.
Now allows the heap memory pool to be defined using the
HEAP_MEM_POOL_SIZE configuration option. This will be the
official configuration approach in the unified kernel.
Also allows the heap memory pool to be defined using the
(undocumented) HEAP_SIZE entry in the MDEF. This is provided
for legacy reasons only.
Co-locates memory pool initialization code to keep the line
that causes memory pool initialization to be done during booting
right next to the routine that does the initialization.
Change-Id: Ifea9d88142fb434d4bea38bb1fcc4856a3853d8d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Drop the _m3 from the test name since this can run on M0, M3, M4, etc.
Change-Id: Ia12ece62fc7b42e28f37e191c90c0dead48d40d0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will make it possible for us to optimize the list of tests we run, for
example, we could exclude footprint tests from the main run because those are
run as part of the footprint checks later in the CI job.
Use like this: sanitycheck -e footprint
Change-Id: I4e7a3aa6fac2ba1c9c99b356f08459da97fda777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce an architecture sorting of boards. This is to allow for
easier maintenance going forward as the number of boards grows. It
will be easier for any scripts to know the board/arch mapping without
having to maintain an explicit list of what boards are associated with
which arch. We can also do things like have architecture maintainers
cover reviews and branches for arch/${ARCH} and boards/${ARCH} going
forward.
Change-Id: I02e0a30292b31fad58fb5dfab2682ad1c5a7d5a7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Renames to K_MEM_POOL_DEFINE() for consistency
- Adds alignment parameter to align the pool buffer.
Jira: ZEP-926
Change-Id: I6cf0a1ce45c3a0fc5f0675047d8928659df1e75e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Zephyr uses python 2.7 by default. Phython3 is breaking windows build.
Change-Id: Id0fdbdce89d63f51a0625f5d1f2f45584ecd4023
Signed-off-by: Sonia Leon Bautista <sonia.leon.bautista@intel.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Allows unified kernel to support legacy microkernel applications
that use private tasks.
Also renames the unified kernel macro for defining a thread
to be consistent with the naming used for defining other kernel
objects.
Change-Id: I667d87056138c45c291dd848344e4051bf9fd1ff
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This misfeature can crop up at development time as the linker scripts
are modified, not just as a regression in known tests (c.f. ZEP-955).
So it makes more sense to put it in a check_link_map script inovked
for every build. Remove it from sanitycheck.
Change-Id: I9c2f47a26a3bc03170b895545476350341e91170
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Oops, turns out that we don't require perl in all our build
environments. Rewrite this script (it's tiny) in Python. Exactly the
same logic.
Change-Id: Icbf4b36ef0b18fca94d54fc7fe5e47343c55c669
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Building samples or running sanitycheck script fails with
the following error using python 3:
Using /home/xekarfwtos/projects/zephyr as source for kernel
GEN ./Makefile
CHK include/generated/version.h
HOSTCC scripts/basic/fixdep
HOSTCC scripts/gen_idt/version.o
HOSTCC scripts/gen_idt/gen_idt.o
HOSTLD scripts/gen_idt/gen_idt
HOSTCC scripts/gen_offset_header/gen_offset_header.o
HOSTLD scripts/gen_offset_header/gen_offset_header
CHK misc/generated/configs.c
CHK include/generated/offsets.h
CHK misc/generated/sysgen/prj.mdef
UPD misc/generated/sysgen/prj.mdef
File "/home/xekarfwtos/projects/zephyr/scripts/sysgen", line 687
kernel_main_c_out("K_MSGQ_DEFINE(_k_fifo_obj_%s, %s, %s);\n" %
^
TabError: inconsistent use of tabs and spaces in indentation
This patch fixes the indentation inconsistency allowing building
using python 3.
Change-Id: I51bda9452e7ff97fe9f07544927d76ce981700d1
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
There are demons hiding in binutils with regard to the size of the
data section that needs to be copied in XIP platforms. It's easy to
mess up and get a mismatch between the linker data output and the
runtime addresses. Add a cheap check to discover this early when it
occurs.
Jira: ZEP-955
Change-Id: If1c61fe8712221c6450b5b89f5f8af006b41b3fe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If the -C flag is given to sanitycheck, generate gcov files for unit
tests and render them with lcov.
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Change-Id: Ic25eae6a3cfc2c45595bd6aa235df2c483aaf6ec
This commit allows building tests using the ztest framework without
including Zephyr. This can be used to enable unit testing single
functions, even static ones.
Origin: Original
Change-Id: Ib7e84f4bd9bbbf158b9a19edaf6540f28e47259f
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Point to a new wiki page for the documentation. The old page can be removed
once this patch is committed.
Change-Id: I2b031bfffe10ec24c41c58d0754f2b14d95f5e53
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Due to the memory pool structure only static declaration of
memory pool is possible.
Change-Id: I4797ed88fd2ac3b7812ff26e552e1745611c4575
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Not every environment has $ZEPHYR_BASE/scripts/ in the PATH, which can
cause conflicts (eg: the test environment doesn't define it to
simplify the build instructions).
Using vercomp as $ZEPHYR_BASE/scripts/vercomp, we remove this
requirement.
Change-Id: I8c390f905907f42d1ba2b4d1378e188705164e13
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Error out when old SDK versions are being used.
Jira: ZEP-584
Change-Id: If3515f38cc75d8a378614ef77d8946ba2d9ab28d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In 1.0 you could set only one callback on the whole gpio controller. It
was impossible for another sub-system to add another callback, without
overwritting an existing one.
Such API has been obsolete for a long time and no one is using it
anymore. Thus removing it entirely.
Change-Id: I6a17fd99373dc6cef1fa2ebb421e992412d5015e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Needs to sort out differences between microkernel and unified MDEF
syntax.
Change-Id: I8f7cb192bdd90c0f9c40593cfbd0aa86b12c7c74
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Cleaner than positional parameters, easier to add new arguments.
Change-Id: I30e85f7b2643775c1006564d18da115599688e88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
On systems with fixed IRQ-to-vector mapping (like Quark D2000),
if multiple drivers tried to use the same IRQ line, gen_idt would
report an IDT vector collision rather than multiple IRQ line collision,
which is much less intuitive.
Move the IRQ line validation to before the vector validation to report
an easier to understand error.
Change-Id: I3930d8df38391e4708db5486e4bd4527d33c4cce
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
QEMU_BIN_PATH is frequently set to pick up qemu binaries from "obvious"
places such as /usr/bin or /usr/local/bin. Neither of these values will
be correct for all users and both directories would typically be found
in the user's PATH. Much better to make QEMU_BIN_PATH optional and picking
up qemu via PATH instead.
Tested with ZEPHYR_GCC_VARIANT={zephyr|xtools}.
Change-Id: I1acfc5b12341c6d330a3e9e90b0ab5bde29e2e4f
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Andrew Boie <andrew.p.boie@intel.com>
This value is unused; it will be overridden by the main Makefile before it
is used. This is for the best since the value is also broken. Remove it.
Change-Id: Ibc5aae3f9967eb2b26a482425c3bbbaf44c0e2bb
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
crosstool-ng toolchains are relocatable so, while the assumption it will
live in $(XTOOLS_TOOLCHAIN_PATH)/$(CROSS_COMPILE_TARGET) is a reasonable
default, it is useful to have to an quick and easy way to override that.
Reusing CROSS_COMPILE works well for this; it allows
ZEPHYR_GCC_VARIANT=xtools to set up the compiler and linker flags
without being too opinionated about anything else.
Change-Id: I6edd97a3753f2a917a34f723273416f76caa647a
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Currently several of the variables in the CROSS_COMPILE_... family
are repeated for each architecture despite the content of the variable
being the same in all cases. Fix this.
Change-Id: Ib40eca67926e22050a366e7b349331deaa7dd954
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The old __CYGWIN32__ does not work with the 64-bit version
of Cygiwn. Using __CYGWIN__ instead allows us to build
gen_idt.c under 64-bit Cygwin.
Change-Id: I6590767153e929764f0b448f74bb8e3f2e593a6a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
On OS X (macOS), "make menuconfig" fails with missing
linker symbols. By specifying the "-l" linker options
with the menu, panel and ncurses libraries directly if
the autodetection fails, it builds and links properly.
Note that this might denote a problem with
"check-lxdialog.sh".
Change-Id: Ib2721646cc01c3e977911d8e6d0c8303dcedbc58
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In some cases, particularly when developing experimental features, it is
useful to be able to pass parameters to 'make' globally for all
sanity checks.
Change-Id: I19eddf222a74064cf6f22ec641fa6b4ff72992e7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Zephyr documentation states that the ARM GCC embedded toolchain is
supported for ARM platforms so lets add a reference to allow sanitycheck
to build with this configuration. This patch fixes 4b554baa87
("sanitycheck: support for multiple toolchain").
Change-Id: I5578a3c78432219e2ba4d7393899d54c818c5c17
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
If defconfig files exist under boards/ that don't correspond to
the set of platforms defined in the .ini files under
scripts/sanity_chk/arches, complain about this. We should be at
least compiling all our supported platforms in CI runs.
At the moment it flags 5 boards. Future patches should either add
these boards to the appropriate arch .ini files or remove them
from the kernel.
Change-Id: Id825d6c6bd32089d9f1bead11bc0765685e3771a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the root Makefile already provides a HOST_OS
environment variable that is exported by using uname,
make use of it in the Kconfig Makefile.
Change-Id: I13655a5295bbcd9f2fdfa8b6309634c1ab143f70
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added support for multiple toolchain usage.
Every arch contains a list of supported toolchain.
Each board can override the supported toolchain list.
If the board is not supported in the current toolchain,
will be discarded.
The current toolchain is defined by ZEPHYR_GCC_VARIANT.
Added support for toolchain ISSM and ZEPHYR.
Change-Id: I31e9b39ba01f6e9bdc4557702428cd09e05f492a
Jira: ZEP-592
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Added support in the sanitycheck to use env variable
value in the filter.
Change-Id: I76388dc04557dcd31e651d23ae8edf96a8fe2474
Jira: ZEP-592
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Using git clone with git: protocol requires proxy settings
that can be a problem that doesn't happen with http: protocol
Change-Id: I4c02289f5c15494c31d4cca0849bf3093b602125
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The per-platform blocks were just specifying defaults and didn't
need to exist.
Change-Id: I9f4c7db4cd16417d5a2c172c3f850f7758dcbd00
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Sanity check script was not handling non utf-8 characters as a result
it crashed and didn't kill qemu and test used to hang.
Now tests fail upon untranslatable bytes.
JIRA: ZEP-673
Change-Id: I885a185e0481083501fce15cd51412bfdd26a7d7
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This reverts commit d73a9bb9c6.
The patch was intended for 1.6.0 release.
Change-Id: Id42058b746a3d2a54e4b1a2983eb58bd10b1ed40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Current code tests treats "" (quotes included) as an empty value for that
varible (as coming from Kconfig). However, that file also used to
integrate with build systems for 3rd-party components, e.g. as examplified
by samples/static_lib, and in that case it will be just an empty string.
So, first strip surrounding quotes, then test for empty string.
samples/static_lib: Update for recent Makefile.toolchain.zephyr changes.
Makefile.toolchain.zephyr is 2-pass now, so needs to be included twice.
ARCH needs to be defined *before* including it. Otherwise, just used
CROSS_COMPILE and TOOLCHAIN_CFLAGS set by it.
Change-Id: I56e963d0d107c77390395682d60400cf6ca62337
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Flashing issues have been resolved. The build system support for
flashing and debugging has been changed back to UFM scenario.
XIP and reset vector no longer disabled. Wiki documentation updated.
Change-Id: Iffe326485c20808dabc1e19e0b18b7b60a83d797
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
sanitycheck is set up to error out on any compiler warnings.
However in the case of deprecated APIs, we may feel compelled
to still test them while they remain in-tree. Don't fail the
build if deprecated APIs are used during sanity runs.
Change-Id: Ic3196896689706d308117e693ab720713d67d698
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Simplify setting of CROSS_COMPILE to just a single line.
Change-Id: I6bb00b404b23011e93897c7cb4a882f2f043c973
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several Zephyr SDK toolchains support multilibs.
Instead of hard-coding locations of the libraries, the proper/cleanest way
is to query the GCC compiler for the locations of libgcc and libc.
However, in order to do this, we need to ensure a certain order of
initialization in the Makefile:
1. Determine CROSS_COMPILE.
We cannot determine LIB_INCLUDE_DIR, TOOLCHAIN_CFLAGS yet, as we don't
know the KBUILD_CFLAGS yet.
2. Calculate KBUILD_CFLAGS using CROSS_COMPILE
KBUILD_CFLAGS often need the compiler to validate options, i.e:
KBUILD_CFLAGS += $(call cc-option,-mabi=aapcs -mthumb -mcpu=cortex-m0)
However, LIB_INCLUDE_DIR, TOOLCHAIN_CFLAGS should not be needed for this
3. Finally, using CROSS_COMPILE and KBUILD_CFLAGS determine LIB_INCLUDE_DIR,
TOOLCHAIN_CFLAGS by querying GCC using -print-libgcc-file-name and
-print-multi-directory command line options.
This change should only affect Zephyr SDK toolchains, all other toolchains
are expected to function as before.
Change-Id: I27b460d46fe65d05fcb8bafb51cd6b3deba275ed
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Previously, gen_idt's code had to be modified to get this information.
We now print it by default when building with V=1
Change-Id: I31bd6c5b851d6280ebcedaab97bd02b8331a2f24
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
checkConfig script scans all '*.c', '*.h' and '*.S' looking for all
kconfig items used into the Zephyr Code and validates if they are
defined into any '*.kconfig' file.
to execute script use:
*to run with default values:
$ checkconfig.py
*to run and get complete log of all symbols used:
$ checkconfig.py -c
*to run from a diferent subdirectory, not zephyr base, like
drivers/grove
$ checkconfig.py -s drivers/grove
*to run and exclude some directories for verification:
$checkconfig.py -e drivers
*to get more help about how to run script:
$checkconfig.py --help
Change-Id: Ia8ddda8b560305eb73224c55645729a40fcb5863
Signed-off-by: Sonia Leon Bautista <sonia.leon.bautista@intel.com>
With this fix now we can use the ISSM standlone toolchain [1] through
ZEPHYR_GCC_VARIANT=issm and ISSM_INSTALLATION_PATH=/path/to/toolchain
variables only, without the need of setting IA_VERSION and ARC_VERSION
always. These are always the same for a given toolchain release.
This is also a way for us to document the currently supported (and
tested) toolchain version.
Tested on Linux only.
[1]
https://software.intel.com/en-us/articles/issm-toolchain-only-download
Change-Id: I6fba8ea9564b2080bd73b627bc7150863401f18d
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Utilize the gcc -print-libgcc-file-name to determine the path to
libgcc.a. Using this also resolve issues if we are building with
floating point and the various ABIs to pickup the right lib.
We can also simply a few Makefiles and remove the need to export
_CROSS_COMPILE_arm_isa.
Change-Id: I293394c921c18fa4984173ba51825d6f9a333697
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some tests individually enable assertions; this forces them on
for all tests. Intended for use with daily builds. Disregard
footprint or benchmark data with this enabled.
Change-Id: I7a0822432d5cab7f3ab0767faf214fde536cd68e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For both of these, we send the .elf binary over the JTAG and it gets
written directly into SRAM. The CPU boots the image from the entry
point (__start).
This does not provision the kernel onto device's User Flash Memory
(UFM). Implementation of this is still in progress see ZEP-273.
Change-Id: Iae8188a21e4a3eecfda0f4f0bb220c0607d719cb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Does renaming of variables and comments to conform to the
"block set" and "quad-block" terminology now used by the kernel's
memory pool code. (Note: This renaming also includes names of
some variables generated by sysgen.)
Change-Id: I8e04cb1ee9ca83daddb487b477da7dd2e1004fd8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the names of 2 types to make them better reflect the
data structures they represent, namely:
- block set: a collection of memory pool blocks of a given size
- quad-block: four contiguous memory pool blocks of a given size
Change-Id: I3e424586e97157eea185fba6836e2e89d10d9cd6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates the memory pool field indicating the size of the
pool's memory buffer, since it isn't used anywhere.
(Anyway, it could be computed by multiplying the maximum
block size by the number of maximum-sized blocks.)
Change-Id: Ia11554bdc2b246a1ba0ea33f05c5e6ce6a32ca13
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates memory pool field associated with a capability that was
never implemented. (This field was initialized, but never subsequently
referenced.)
Change-Id: I58cf8c4bb846a66b4c8754654ffc3ff55abcff7f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
It's not clear why this was forced in the first place.
Change-Id: I95c5e21ac0861a7b224ac9715bc5691c97922fe4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer assume pointer sizes are the same between host and
target, and use stdint defintions to size things.
Change-Id: Ie4dc41c60d62931fdb3d1764ade01c16a64d0b54
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Pushing this to see what fails as its a similar fix to the one Flavio
pushed. Yet in local building with sanitytest not seeing any issues
Change-Id: If42c13b0c1827fe89fb332ac6c40a14a76553330
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is is a proposal to have a system to filter the output of the
build (compilation, documentation, sanity check and runtime tests)
that eliminates known issues so that whoever sees the output of the
tree can note new issues being added without having to dive on
existing, known ones.
Most common user of this will be the continuous integration system, to
decide what is shown to gerrit as feedback to the user who submitted a
change.
The rationale behind having it in the tree is that if somebody submits
code that introduces a false positive (due to tool limitations) or as
an accepted (normally minor) issue to be fixed later, it can also
submit a "filter" for it without breaking CI.
For example, consider the documentation workaround in include/uart.h
(that will be reverted when this is done):
diff --git a/include/uart.h b/include/uart.h
index a30b211..178bd5e 100644
--- a/include/uart.h
+++ b/include/uart.h
@@ -97,7 +97,7 @@ typedef void (*uart_irq_config_func_t)(struct device *port);
* @param sys_clk_freq System clock frequency in Hz
*/
struct uart_device_config {
- union __unnamed_workaround__ {
+ union {
uint32_t port;
uint8_t *base;
uint32_t regs;
This introduces a harmless warning in the documentation compilation
process due to a limitation in the tools that will be fixed in future
releases. In the meantime, as they accumulate, it makes more difficult
for people to know if *they* introduced any other warnings (or
errors). The configuration in .known-issues/doc/uart.conf matches that
warning and filters it out (and only that), with enough regex glue to work
around subtle context changes (like line numbers).
The implementation is a Python script that can take the build output
and remove what is being told to ignore by a list of configuration
files, each of which contains a list of single/multiline Python
regular expressions.
Addition of said exceptions is caught by CI: it will trigger a
maintainer being included as a reviewer because the as directed by the
entry for the .known-issues in the MAINTAINERS file.
Change-Id: I7939e0726f2c505481592c3a7f5f40fa3e9c62fd
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Fixed resources leak in pTable when the lseek command
fails.
Change-Id: I414276399b0d0ca3dee0c18d307ccc2035d66198
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
checkpatch warns about kconfig lines that contains spaces
instead of tabs.
Change-Id: I60aa74072ce424f21db64a7df0804d7d4cbe315b
Jira: ZEP-427
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
We will require 6 variables to be defined by SOC-specific
linker script; these values in turn can be pulled from
defines in layout.h.
To help position code correctly we define two new ELF sections
for this arch, 'reset' and 'exceptions'.
Change-Id: Idffbd53895945b7d0ec0aac281e5bf7c85b4b2c2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For the moment, NIOS2_CPU_SOF must be set with the path to the
CPU configuration. We are checking with Altera on whether we
can directly check in the binary to the source tree.
These scripts depend on tools provided by the Altera Quartus
Prime Lite Edition. This is available for free but requires
registration on Altera's website to obtain.
Change-Id: Ia6cb6c9e43c3e141807a887cb25c47b370a7d8e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to expose the path to the newlib headers that are part of the
ARM embedded gcc at ${GCCARMEMB_TOOLCHAIN_PATH}/arm-none-eabi/include
otherwise we get build errors like when trying to use newlib:
lib/libc/newlib/libc-hooks.c:17:19: fatal error: errno.h: No such file or directory
Change-Id: Iedce526d23e54e54b9cefdfa6ca176fe12ed8090
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Similar to '==' but compiles the RHS into a regular expression
and attempts to match whatever is in the environment against it.
Change-Id: I7a03452ef88d067b62661d14dc6f42273de436fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
for GCC ARM Embedded
When compiling and linking Zephyr with GCC ARM Embedded,
the path to the libraries to be linked needs to be provided
explicitely for the correct variant to be linked in.
JIRA: ZEP-377
Change-Id: I745aa45c7dde12f1cc5c8ea4380b904e086ed94d
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Still WIP. Give statistics on memory/flash usage.
Run:
make BOARD=<board> ram_report
or
make BOARD=<board> rom_report
Change-Id: I6b0aee09b89275e12f1cde863d2c0f5b8dfd0409
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
when importing code from external sources, we do not want to fail
on checkpatch and want to run full sanity checks.
Using --exclude <dir> we should be able to exclude a list of well
defined locations in the tree that carry sources from other projects
with other styles.
Change-Id: I7d321e85eed6bc37d5c6879ae88e21d20028a433
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For xtools, add sysroot also to include search path.
Change-Id: I72d37c54eb7f3693d3a207a35802b29b150c84f1
Signed-off-by: Sakari Poussa <sakari.poussa@intel.com>
There seems to be no way to configure it, so I've just removed the code.
Change-Id: I35341e8afc0bdfa8b953b833cfb0eecf05b81c16
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Sanitycheck will use this to allow for much more expressive
conditions when filtering test cases based on defconfig values.
Origin: Original code
Change-Id: Icb650a2aa383699e4f2e18f66e853279c02b50e5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The handler of the microkernel events are not declared properly.
This causes the public event objects to complain about
undefined functions. Fix this by declaring the function
before using it.
JIRA: ZEP-85
Change-Id: I68afe777bad66e010c92e637806a48911b2f52f4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Directory layout per SDK 0.8 structure. Using toplevel libs for
now.
Change-Id: I7852a9def09fb0a5f0a6e496249d2ebb86720d8f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of defining the output format in the toolchain environment
setup, define this per SoC that supports the ABI.
This will allow us to directly referencing an installed toolchain
without the need for declaring ZEPHYR_GCC_VARIANT
Change-Id: Icd1a7a21acbf075a51854fb2ebb3ef06788ce9b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It allows to silently ignore non-existent files.
When using wildcards in Kconfig source files
(e.g. source folder/*/Kconfig), it is possible to refer files
that does not exist. In the previous example, it is possible
that Kconfig files do not exist in one of the folder's
subfolders and it is not a requirement for the file to exist
in each one of the subfolders.
Additionally, it fixes an issue for wildcards in the file name.
If the name contains a wildcard, Kconfig should iterate
over each file included in the wildcard
(e.g source folder/myKconfig.*)
Jira: ZEP-177
Change-Id: I5aa192ca1e2df83461b12a86fe29a98cd95c4256
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Many sub-systems might require to set a callback on different pins.
Thus enabling it via changing the API.
It is also possible to retrieve private-data in the callback handler
using CONTAINER_OF() macro (include/misc/util.h).
Former API is still available, and is emulated through the new one.
Using both should not be a problem as it's using new API calls.
However, it's now better to start using the new API.
Change-Id: Id16594202905976cc524775d1cd3592b54a84514
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generates lots of false postives, so make it warn only.
Change-Id: I0b2fedc564c29bff32f7c48702a9ad54a969650b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
() The test names are getting longer so adds more padding.
() Aligns the numerical size numbers for easier visual
comparison when scrolling in shell.
Change-Id: Id218a641e9d5dffb77bf813ffbd828c48d14020f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some boards require a newer version of openocd, this will
allow overriding the default version that comes with the SDK.
Change-Id: I70113182c3a2c8610e3b36542c6057ff3f0df547
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ordering of the list of platforms is in priority order,
as the sanitycheck --platform-limit option chooses the first
N platforms in this list when doing a run. Move arduino_101 to
second position. qemu_x86_iamcu is still top priority as it
can execute code as part of the tests.
Change-Id: I989d91c66a0a741ce8eebe6279ee4512c33eb5e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add the last path information in the testcase root to the
test name, so that there is much less of chance of name
collisions and the reports come out with the same names
as before.
Change-Id: I75ed6ee96251058dd2547e57be31db3c2517a497
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A recent tree change moved testcases to both the tests/ and
samples/ directory. The default testcase root was just made
the root of the Zephyr tree, which could lead to potentially
long scan times as every single directory in-tree was checked.
For example, it could be very time-consuming to scan everything
under the sanity-out/ dir if -n is used and --all was used in
a previous run.
Now we allow multiple testcase roots to be supplied on the
command line, and by default only scan under tests/ and
samples/.
Change-Id: I8dac747835b87801474e08c236913e04db64f87b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds the ability for sanitycheck to use arbitrary report file
for size comparison. This is useful when optimizing binary size.
For example, a report can be generated with master head, and used
as base for comparison.
Change-Id: Id8c61146c498ba62c4cc77a9ef7d390c0fb11487
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of running nm/objdump and parsing the results one testcase
at a time, do these in parallel to speed up sanity check a bit.
The sanitycheck now requires at least Python 3.2 to run because of
the usage of concurrent.futures.
This reduces build time (--all -b) from 4:30 to 3:08 on 24C/48T
Xeon-E5.
Change-Id: I8e7c1efb2f473c7f2b65658f8ed9a101ed091eea
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The "initlevel" section is being metioned twice. It does not affect
the final size calculation, but just remove it just for reader's
sanity.
Change-Id: I0e7d6e82c730631d2c83ca09dde0f675805840f3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The script will now run under either Python 2 or Python 3.
Change-Id: Ia7e6647b2331ff9edfbdec7b7357439f7095a3bc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to move SoC and board kconfig defaults
to be parsed later.
Change-Id: If24bdf310dac7034da63f34c0e2add173fe75844
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a debug option to print defaults and their conditions
inside config description under menuconfig/xconfig. This aids in
debugging of kconfig creation.
Change-Id: Ie651435f6b2115dac1bd3a6f7a1b3c2df3c9b0ed
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If the arch ini file doesn't have a specific block for the platform,
just assume all defaults.
Change-Id: Id6ab1ede8936bdd6006a5c4fd2f9a4f6aaf42478
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It is an unfortunate fact of life that our CI machines are often
severly underpowered virtual machines that take quite some time
to run sanitycheck --all. The only other option was to just use
the default test case filtering semantics which chose one platform
per arch to test.
Now it is possible to specify N platforms per arch with the new
--platform-limit option, allowing greater flexibility on how many
tests will be run.
The counter-intuitive use of '--platform all' or '--platform default'
is no longer supported as these use-cases are covered by other
command line options.
Change-Id: I45b0050df52e1a22e75534a3876d89e3c77698c9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rationale for defaulting to IAMCU variant is that our most
interesting x86 boards use this calling convention. --all
will test both.
Change-Id: Idaddfec51a74ae85691d348adeeb88a8528060ea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For some strange reason IAMCU sets e_machine to 0x06 which causes
QEMU to freak out. This is just x86 code with a different C
calling convention, hack it back to 0x03 (EM_386) before running
under the emulator.
Change-Id: Ia5d51b771cad41f3013eb3d6a17912c8909c9bac
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Specifying HEAP_SIZE keyword in an app's MDEF file, results in
creating a new memory pool, which can be accessed using the
task_malloc() and task_free() APIs, which have the usual malloc/free
like semantics.
Expected format in MDEF file
HEAP_SIZE <value>
Change-Id: I0569cffeecf8a2c23c20c7b359256123ece91982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Now if you try to call IRQ_CONNECT() multiple times on the same
IRQ line it will correcly fail the build, as intended.
Change-Id: Ia629ae3dd009bd3a2e1dbd9797dc2b723b02d234
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These don't have necessary symbol information to determine if the
kernel is XIP or not. Fail instead of giving bogus data.
Change-Id: I87f6eeb5983f5275929e5b8d448a054b83e23d8f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Python 2 isn't supported anymore and doesn't get fixes/updates.
For the long-term maintenance health of sanitycheck, convert to
use Python 3 interpreter, which mostly involved changes to how
strings are handled.
Change-Id: Ic42f5b2328001f04d876fd650986c4433968a76b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix issue where a space is required after a comma:
-:245: ERROR:SPACING: space required after that ',' (ctx:VxB)
+ SECTION_PROLOGUE(_NOINIT_DMA_SECTION_NAME, (NOLOAD OPTIONAL),)
Now we will ignore such errors if the comma is followed by a ).
Change-Id: Ib38161cd11e650764c319ba373a1f7c1a6d80df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update to commit 6b10df4257367dd0ead49f88df473972c00a8b5c from the Linux
kernel, relevant changes since last update:
- checkpatch: fix a number of COMPLEX_MACRO false positives
- checkpatch: improve macros with flow control test
- checkpatch: warn when casting constants to c90 int or longer types
- checkpatch: improve the unnecessary initialisers tests
- checkpatch: improve tests for fixes:, long lines and stack dumps in commit log
Change-Id: Ic4f8d925cd7c076e18eb2f2841913be61239aac2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have moved tests around, update the files to get accurate footprint
changes per test case.
Change-Id: I563acef4665cb0ab6d3e7e01050a3a49f98b8b9d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MinGW have small conventions differences in the
call of some APIs. The following differences are
addressed:
- mkdir method parameters
- printf format for 64 bit integers
- utsname structure
- glob library
MinGW does not provide glob library.
This patch adapts the code to avoid this library when
building for MinGW on windows systems.
The new routines allow windows to support wildcards
(*, ?) on Kconfig paths.
zconf.lex.c_shipped is the file that the build system
compiles by default. If the user defines the
REGENERATE_PARSES environment variable for the build,
then zconf.lex.c_shipped is generated from the file
zconf.l. Both files are provided in the patch
to keep coherency with the REGENERATE_PARSES option.
Change-Id: I5b6ad24ead0521913ab6ea9da93551edcd2dc66b
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Specify the kernel being tested instead of relying on parsing
Makefile for KERNEL_TYPE.
This is needed for testcases that build for multiple kernels.
Change-Id: Ic4df2fa66eee4cd498955aee2b0da80a99d35e30
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have test cases in both samples and tests directories,
so cover both by scannining the root directory.
Change-Id: I5258d11b23ced2cc4fc88af4d40269310442dc9f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The build system now pulls in the correct intrinsics libraries
when building for Cortex-M CPUs.
Change-Id: I55ed249cdeb04de8843ad4cdc0099e7031e368b0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Some tests take a very long time to complete, add a directive in
testcase.ini to mark them as such. Unless --enable-slow is passed
on the command line, these tests are not executed, only compiled.
app_kernel and test_sha256 marked as slow test cases. It appears
test_sha256 was being skipped earlier due to platform_whitelist line
which has been removed; the test should be able to run on all
microkernel-supporting boards. Same with test_aes, which completes
very quickly and is not marked as 'slow'.
Change-Id: I39ec8212f3fa10122ff786c10b6659d22bae64e3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Having priority levels 0 and 1 reserved on x86 due to implementation
details on how the CPU uses the vector table is confusing to users,
and makes it unnecessarily difficult to share drivers between arches.
Now on x86, priority levels 0 and 1 are available. Semantically, all
priority levels have had 2 subtracted from them.
It is no longer necessary to specify a priority level when the
vector itself is specified. If an IDT entry has a specific vector
associated with it, any priority argument is simply ignored.
In gen_idt, some simplifications have been made:
- The printed representation of a generated entry now fits on one line
- Some checks being done in validate_priority() were redundant, as
generate_interrupt_vector_bitmap() also ensures that there are
sufficient free vectors within a priority level.
Change-Id: I26669d8ee0a53f48fbc2283490a8c42d8b1daf8e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When you run the script in another console, no bash, the script
won't be able to run the sanitycheck due to the source.
Change-Id: I89d1f0a4e0ae9f8b0bf0cea77e3752c5a1012840
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
The data type returned by sizeof in windows is different to Linux.
This commit cast the value to the largest type to avoid a warning
when compiling on MinGW and Linux.
Change-Id: I4ce50f0b62dd614b1d180adea5aa2679032643e0
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This reverts commit e3c2477c52f792ec972f9715ac9a810e52bc9929.
This was done for windows build support. We can disable this for
windows individually instead of disabling it for everyone.
Change-Id: I8bd322b024c0471f89e83a41589c03783c0f9893
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The toolchain provided by Yocto has a specific path location.
The linux toolchain home directory after the installation is
sysroot/i686-pokysdk-linux meanwhile the mingw toolchain home
directory is sysroot/i686-pokysdk-mingw32
Change-Id: I2241a996897539c2c630c6e391f5125b51385b8e
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Both ARM and ARC did not have the right include path defined.
Change-Id: I8322b49ffa1830ef7b06cddef686ceb83a85fdfa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using the latest SDK (0.7.2) you can flash directly using make
by specifying the board, for example
make BOARD=arduino_101 flash
This will build and flash the generated binary to the board.
Change-Id: I90254abd69874efbb449ef318079958980c23074
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most systems have far less than 256 IRQ lines available, so
save some bytes in ROM by making this a config option.
On systems with MVIC, omit the table entirely as the mapping
is fixed.
The build cmd_gen_idt is slightly easier to read and will fail
immediately if any of the commands in the sequence error out.
Change-Id: I411f114557591e5cd96b618e6f79f97e8bedadf0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the sanitycheck script to identify the "init_array" section
as a valid section in the image.
Change-Id: I55c20909d3734e68e8ec319e1abde94da93665a1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Use makefile targets to build and link final binary. This removes
dependency on a shell script which is not portable and imporves
dependency tracking when building.
Change-Id: Ib75f162cdb1dde35ccaf980658bfe70daaf581b6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Modules are not a feature of the Zephyr kernel.
- genksyms removed, not used by zephyr
- bin2c remove, not used in zephyr
Change-Id: Ic8f0e786530dcf410b07d6c5cc47f1087000d528
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Build kconfig with -DKBUILD_NO_NLS by default and disable compiler
warning on Mac OS when building the host tools.
Change-Id: I76a2b5ab6b6b1c0bbe2dc2b31e3bd651fd05948e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the SDK is updated usually it comes with new versions of the
compiler causing issues with the toolchain not finding libraries.
This will get the version from the compiler and sets the path
accordingly.
Change-Id: I854c57bb082ae8136eebdd0ae7a8c151c1d699c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes a build warning caused by using the incorrect printf
identifier for a parameter of type size_t.
Change-Id: I03ecc245de366e7de07eb2b49a03f69af087090c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update the crosstool-ng .config files to build the most recent
gcc compiler (5.2.0) and update the configuration of the xtools
variant to use this compiler.
Change-Id: I8c895943a9db8637abf294da36df35040ae7527f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MinGW does not provide mman nor arpa/inet.h library.
This patch modify fixdep to work with windows without
using those library.
Change-Id: I3908735d0d989b165f2adb70b21f4cd41c8e15a6
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
This patch change the custom macro WINDOWS for the macros
provided by the compiler to determine if it is being build
on Windows or Linux to use the correct flags for opening files.
Change-Id: I7278439767e93754eaae831b6f234b48c3ac8eac
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When an app fail to run, windows show a pop-up with the errors.
To avoid this pop-up we disable this feature by default
Change-Id: If21f3aaf37555052874ee8e29310e955124d2cb0
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
Added error log when base or current commit cannot be built.
Removed exit(1) when there are deltas, deltas should not be consider as errors.
Change-Id: I182edab83be14f642086818a9df0be96d8d4ae09
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
We now only use ARCH and avoid duplication of the same definition.
Change-Id: Ia61059b906a2ebc31e703412bead948997975d58
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a new script to compare footprint apps and report
RAM or ROM changes in images. Also works without a git tree.
Usage:
./scripts/compare_footprint -h
./scripts/compare_footprint -b 1280bec
./scripts/compare_footprint -c 96acd07
Change-Id: Ib5d212eefe50c0d4650291265d6260604f9cd8c9
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This platform if actually a subsystem of the Quark SE SoC and is
not standalone. Use a more descriptive name and remove the architecture
from the platform name.
Change-Id: I16b1ab8dd668441683b07fc4512c219924463441
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building for a certain platform, we have no idea
what architecture we are building for.
We used to specify the architecture alongside the board or platform
name and this was used to find the defconfig in arch/<arch>/configs.
By putting all board configurations we support in one place we do
not have to specify the architecture, just the configuration name.
Change-Id: Ib7e9f63b9a8051714dc207f583fd26ef620497d8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows using wildcards with kconfig files so there is no need
to include individual files within a well define tree structure.
For example, you add
source "drivers/*/Kconfig"
and all Kconfig files under drivers/ will be sourced and the order in
menuconfig will be based on the wildcard processing, not in any particular
order.
The main advantage here is that drivers and platforms become drop-ins, a platform
or a driver can be added by just placing it in the right place without having to
change system Kconfig files or Makefiles (Makefiles will be supported in other change).
Change-Id: Id223ba10e6f48b4c48435e9ea37885162ce55e7c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Text files on windows are be created with a different format
for line endings. This commit improves the host tool 'fixdep' to
support files with the windows-style line endings.
Change-Id: I1d120790c5cbb1f1e7df6761821bc7e01c99b988
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
In order to keep the code compatibility with Linux and Windows, the flag
O_BINARY is defined as zero when we are compiling in a Linux host. But
when compiling in a Windows host, we have to use the definition of the
flag provided by the host's includes. Currently, there is a custom macro
to identify if the host is a Windows host. This commit change that custom
macro for the macros that compilers provide to avoid defining a new one.
Change-Id: Ifeeab17c68d07039bd5b4a80c8263d338e6448ce
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
When config_whitelist is used in a testcase that has extra
arguments, those were not set correctly and the test case build would
fail in some cases.
Change-Id: Idb8a4f07d29beefe62de932afa7cc0986e8dd1d4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the iamcu toolchain is based on 5.2.1, update the variable so we
can point to the right path of headers/libraries.
Change-Id: Ia1634efc6fb6a37eb3456d9b7bd3c30e03c40b4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows the customary syntax for declaring named arguments,
such as:
asm ("mov %[out],%[in]" : [out] "=r" (x) : [in] "r" (y));
Since :[ is comple-error-inducingly invalid syntax in other cases,
this won't create unintentional leniency for normal uses of [
Originally from https://lkml.org/lkml/2010/11/16/145 by Dave Martin
Change-Id: Iead3fdb147ba2f6cbd108f19dd348bb72a7e6b6f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_GCOV_KERNEL comes from Linux, we do not use this feature
in Zephyr.
Change-Id: Ibef77ac4b26f2831b2fbba25e2a4d72899d75974
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removing unsupported features that we inherited from Linux kbuild
Change-Id: I7cf19f913b0a7ba6195d2cb9c04b426144bdebb9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Lots of code that is not being used by Zephyr but makes debugging and find
issues related to zephyr very difficult.
Change-Id: If8f6515d68f64b03cc881a9c3cde48c0451fe3b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Run sanitycheck with --release option to generate the numbers for
this release.
This will reset the footprint numbers so that warnings are based on
the latest release numbers.
Change-Id: Ibad9ed4120cd47109eec7a234e70af5b12a2a630
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add tags.sh from the Linux tree. This file is used by the tags, TAGS,
cscope and gtags targets in the toplevel makefile.
Change-Id: I9b0845dab26dc9b15731888b3d713dd3950eb1d8
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
In case we want to skip a test for whatever reason without having to change
the other filters or deleting the ini file.
Change-Id: I8af527b1c56b8a2f395cb9ca336162233f150c2e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
While adding private object supports, there were lots of
copy and paste. This results in lines writing to kernel_main.c
while it should be writing to sysgen.h. So update those lines
to write to sysgen.h instead, and add more new lines there
so sysgen.h is easier to read.
Change-Id: I38496b58d6dc4ed8a50eab4e09ac7bff8c59026f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch enables defining microkernel events within source code.
This is similar to other private kernel object patches.
The test has been modified a little bit due to the fact that
the event ID is now a memory address, instead of numeric ID.
Change-Id: Ie3c8d4f4e459d9c631e50bb242cf7a05ca8ea82c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
use zephyr.h as the main include in applications, no need to have nano/micro
includes in applications and samples.
Inclusion of the proper kernel headers is be handled in the zephyr.h based
on the configured and used kernel.
Change-Id: If5275cef5d2ad1f475dfb39102cb71cfe5630f6c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the 'gen_idt' tool to generate a mapping of IRQ numbers to
interrupt vector IDs, thereby allowing the IRQ priority to be utilized
when statically connecting an interrupt.
Change-Id: I2e54ceb65145682820dfbd8ca1ee6ec68d71ce1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following macros to improve code quality.
UNSPECIFIED_INT_VECTOR
UNSPECIFIED_PRIORITY
UNSPECIFIED_IRQ
Change-Id: Ia51becd39ce9cf07d8a26c15e62f3e3d5673b951
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add a list for each kind of microkernel object. Add the register of
the public objects to the tracing lists in the dynamic initialization
function of sysgen.
Change-Id: I8c413812e4db0f443c9dd3a5501e0096270dc70e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
rename the sections macro to avoid conflicts with the same
macro being defined in sys/cdefs.h of an external libc.
Change-Id: I4d9e060eeff788ca4112c0ad3e98f0bea135f145
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Lots of enhancements and bug fixes but primarily it fixes an issue
where checkpatch was reporting errors in lines that have not changed.
Change-Id: If141a294b92cbabd4ad8978a40168abb062aebfb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Updates the 'gen_idt' tool to generate a bitmap of (statically) allocated
interrupt vectors that is linked into the final image in a manner similar to
the static IDT. The kernel then uses this bitmap when dynamically connecting
an interrupt vector, thereby preventing the dynamic irq connections
from clobbering the static irq connections.
Change-Id: I0a8f488408dad4912736865179f32f63ff1ca98f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds two new fields to the ISR_LIST structure (irq and priority) to allow
the decoupling of the vector ID and priority from the IRQ number at some
future time.
As a result of the addition of these two new fields, the gen_idt tool is
modified to both process these new fields as well as validate them.
Change-Id: I343dac68d99c78168a25b19784140f85d5db7578
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Refactor gen_idt tool to detect more errors as well as be both more clear and
easily expanded.
Change-Id: I035a0666871733cc670f64302a1e85be455550ee
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When building a sinle application, use the compiler option checking
macro, disable macro if running sanity checks to speed up build
time.
Change-Id: I63b17f4bd9fdff9030f1b2550ec8b05ee0bc2df2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Originally, the config_whitelist was done on the platform level
ignoring any config options in the testcase. This change generates
the defconfig for all relevant testcases that have config_whitelist
and applies filters based on the testcase defconfig.
If we have many testcases using config_whitelist it might be a bit
slower, but it is more accurate.
Change-Id: Ie1e871e85f05196d04419d6cf9a87f9927bfbfd1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
XIP is currently implemented in Zephyr by copying only the RW
sections from flash into RAM. For these sections, if the VMA spacing
is different than the LMA spacing the sections in RAM will not be
at the right addresses. Warn about this situation.
Change-Id: I59a55fc27703103e37a7f0bbc34f236047621e0e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Several recently added binary sections were not being taken
into consideration, unknown sections now trigger test case
failure
- Use same VMA/LMA terminology that objdump uses and show both
addresses
Change-Id: I641eef64aaed6612f62e5aa092f66baaa2797c70
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr does not have a MAINTAINERS files, so remove the comment
about checking the file when reporting false positives to avoid
confusion.
Change-Id: I915dba009902a68d5e621603d22b7df57d84a1b1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce a new variant for the Zephyr SDK, do not call it
Yocto SDK anymore.
Keeping the yocto variant for now to avoid breaking developer
setup.
Change-Id: I545693eb4be4cec910096ca2ba7e3f38803b4c8d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes *config targets that does not apply to
the system or that are not implemented
Change-Id: Ib7739fda4085562fbe7d14491b7de9f354d0dc7d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Fixes an issue if CONFIG_KERNEL_BIN_NAME is customized.
There isn't a mechanism to parse the project defconfig, but
as there should be exactly one .elf artifact in the outdir
just glob it.
Change-Id: Ib3d517006dd13ef6e3e10ea3a8e975c287344d56
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Revises microkernel initialization code by incorporating the existing
_k_kernel_init() and main() routines into _main(). This optimizes kernel
initialization a bit, and allows application code to use main()
if desired -- for example, as the entry point to an application task.
The change also eliminates the need for sysgen to generate a routine
whose content is always the same.
This change preserves the existing order of operations done during
kernel initialization, and leaves further improvements for later.
Change-Id: Ie03d8a6f38f8a311f398667ed977fd8478719d70
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updated bin references in Makefile.toolchain.yocto
with new versions of gcc and locations.
Change-Id: I12e623ebfdf1863b58865fcd7f1eb7413b0f236f
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Change-Id: I9ea4fd21ac46b42c2b6d87ee7eeeff67768bc375
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kbuild always runs in $(objtree). Actually, $(objtree) is always
set to "." by the top-level Makefile.
We can omit "-O $(objtree)" and "$(objtree)/".
Change-Id: I17eea62cc3b85957572f9f9eb5207caa1a91f881
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1. Add `+' to parent make rule.",
is displayed.
$ make -s defconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
$ make -j8 kvmconfig
Using ./.config as base
Merging ./arch/x86/configs/kvm_guest.config
[ snip ]
#
# merged configuration written to ./.config (needs make)
#
make[2]: warning: jobserver unavailable: using -j1. Add `+' to
parent make rule.
scripts/kconfig/conf --oldconfig Kconfig
[ snip ]
#
# configuration written to .config
#
Change-Id: Icda8d75af0bb50612cb020874649593c2ed0154f
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Change-Id: I6891ecfc5003b4494d72878fa0da00a6ab452b21
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Change-Id: I8609e00ce99b491dcb1d41e64106a6829dc1fb41
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, "make tinyconfig" does not work with "-j" option.
$ make mrproper
$ make -j8 tinyconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --allnoconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:122: *** You need an existing .config
for this target. Stop.
make: *** [tinyconfig] Error 2
As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.
We can fix this issue by moving the error check to the shell script.
Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file. It is reasonable to check its existence in
the shell script.
Change-Id: I4c6b26bf3b19c5d5b19ed43ee6b553f7a5944c21
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I5fdbe712db8e15031c8c214c0d4378f8508d03da
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Two or more arguments are always expected. Show usage and exit if
given less.
Change-Id: I1e503495f34eab3f181238a1aa877a4aee3b7e5e
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Due to similar padding issue as pipe, the list of task object
may not be used directly. As mentioned before, some compiler/linker
may pad the large struct. For example, compiling under gcc and
march=i686 pads the struct to 32-byte alignment (march=atom to
64-byte alignment). This causes issue with sizeof() and pointer
arithmetic because they have no idea about the padding.
When the stars align in a certain way, these task structs may be
corrupted. So add a task pointer list and use it for task
manipulation. The task list remains as it is beneficial to group
them together to take advantage of cache locality.
Change-Id: I0e86bfe05742040f4540d7854c1ac14e76162776
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The generic name is too generic and when it appears on its
own, for example nano_generic_defconfig, it is not
visible what the file is about, so call it generic_arc the same
way the Kconfig platform is called.
Change-Id: Icf737f305d84142dad4f52fd26a5c7481f9fc5be
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add ARC to the list of architectures sanitycheck will build against.
Change-Id: Ibf1aa3a167a7a53a59b40bde4442d16f7d7b9611
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
It was badly named: this routine initializes what cannot be done
statically, i.e. what has to be done dynamically.
We also do not have concepts of "node" anymore since the kernel is
single-node only.
Change-Id: Idde3183ca01ca3f70c5ae0e948734a965582ded8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
We have been building offsets.o in the include directory, this
is wrong.
Change-Id: I22e785413158117e1cdfa8353bd7f4d022fae0ac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Follow the model of the Linux kernel for adding arch
specific CFLAGS by using the Makefile and Kbuild combination
in the arch/<arch> directory.
This will also allow adding architecture specific targets and is
easy to maintain when alongside the architecture.
Change-Id: If51a78e8845baa71d9090c4a4f49fcd013354840
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Makefile.inc duplicates many of the existing targets in Makefile.
Instead of duplication, pass all none local targets to Makefile
and implement only those needed locally.
Change-Id: I1e923dd398a138543fa676ab67570b630c75d7ea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This script will download and build grub.efi which can
be used on galileo for booting Zephyr.
Change-Id: Iba8777ae3868befa3bcd3972813779dbecd9c947
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using nm and sed works fine on Linux, however when moving to other
platforms, nm and sed do not work the same way and might have
different behaviour. This reduces dependency on host tools and brings
back the code for generating the offsets.h directly using a built
utility that is portable.
Change-Id: I13db1c16cbed12e366fd41d151886bbcbf419548
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
k_proc was a legacy leftover that does not make any sense, since there
is no concept of a "process" in the system. Rather, that data structure
refers to a 'task control block', i.e. the representation of a task
execution context from the microkernel's point-of-view (not to confuse
with the 'struct ccs', the representation of a thread execution context,
from the nanokernel's point-of-view).
Change-Id: Ic29db565af023be629ce740bbcb652ece7dc359f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This commit enables the use of special toolchains other than
the default. Some architectures have specialized cross-compilers
within the same SDK that need to be enabled for specific platforms
of an architecture.
For example, for Intel MCUs, we have an optimized toolchain that
needs to be used for specific platforms under x86.
Change-Id: I7e25603dd66ed3ec4e019c72483c76a32b3bbdde
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The files idtEnt.h and segselect.h in shared are linked from
the source tree for no good reason adding and extra top level
directory that might be confusing.
The shared/ here means shared between host and target, this is
not longer necessary in our build system.
Change-Id: Id9665e10de7a1d290888d9069be3db9f4330d284
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sizing code was merged with the sanitycheck script. A new
-z option has been added to simply measure and report sizes
to stdout instead of running any tests.
Change-Id: I1450e3b08e3bd0030d2df00190da884621962d01
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This shows all changes in size, good or bad. Useful for testing
size optimizations.
Change-Id: I47124b64f7d751120af666a4b7c7efd4bbed4ac8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will allow building of external components and linking
them at the end of the build process to the main kernel.
add a Makefile.app to the project directory with the required
targets, for example
Makefile.app:
KBUILD_ZEPHYR_APP := /tmp/libapp.a
/tmp/libapp.a:
@touch /tmp/libapp.a
Change-Id: If2ba6b3ee59023acc5f85c5701b65c4d096d5059
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Right now mdef file of an app can only be hosted in the
application root or under the same tree. This patch
allows hosting the file at custom location outside the
application tree.
Change-Id: I5ffdacb00d29d754d0fdd826c8f190f5a7968905
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds unit test for microkernel private memory maps.
The code piggybacks to the public memory map test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private memory maps test move the memory maps inside
source code. So, both mdef files will need to be updated at
the same time.
Change-Id: Ia7f65f55b61d9fb0d42ba58d63662e914d69194e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining memory maps in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MEM_MAP(mem_map_name, ...). The memory maps created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
memory map APIs.
Define the memory map using:
DEFINE_MEM_MAP(mem_map1, blocks, block_size);
and "mem_map1" can be used, for example:
task_mem_map_alloc(mem_map1, ...);
or,
task_mem_map_free(mem_map1, ...);
etc.
To use the memory map defined in another source file, simply add:
extern const kmemory_map_t mem_map1;
to the desired C or header file.
Change-Id: I9c551b90f9d0a95f961fd8ec1c5278c2ea44312d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_mem_map_list was a static array generated by sysgen,
where it containing all pre-defined memory maps from MDEF file.
To support private memory map objects (aka, defining them within
source files), the list has to accommodate memory maps that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all memory
map pointers go into this section. By doing this, the list
can still be manipulated as an array.
Change-Id: I1f3414b72f685fef4b99850749178661f14d9345
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque memory map object id type is now a pointer to
the associated memory map structure, rather than an index
into the microkernel's array of memory map structures.
This change is a pre-requisite to support for private
memory map objects, which are defined in source code.
Change-Id: I82ecb59eeed00efa54f781f775710c92ff9c9fc9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private pipes.
The code piggybacks to the public pipe test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private pipes test move the pipes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I6fdb5eab7c3a1d6f4b72c26a3620cee0188b07a5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining pipes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_PIPE(pipe_name, ...). The pipes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
pipe APIs.
Define the pipe using:
DEFINE_PIPE(pipe1, size);
and "pipe1" can be used, for example:
task_pipe_put(pipe1, ...);
or,
task_pipe_get(pipe1, ...);
etc.
To use the pipe defined in another source file, simply add:
extern const kpipe_t pipe1;
to the desired C or header file.
Change-Id: Iae8e04706359bc18aae51acc75df3e3d26388882
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_pipe_list was a static array generated by sysgen,
where it containing all pre-defined pipes from MDEF file.
To support private pipe objects (aka, defining pipes within
source files), the pipe list has to accommodate pipes that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all pipe
pointers go into this section. By doing this, the pipe list
can still be manipulated as an array. The reason behind
putting the pointers to pipe, instead of the pipe objects
themselves, is that some compiler/linker may pad the large pipe
struct. For example, compiling under gcc and march=i686 pads
the struct to 32-byte alignment (march=atom to 64-byte alignment).
This causes issue with sizeof() and pointer arithmetic because
they have no idea about the padding. So use pointers here to
prevent padding.
Change-Id: I6d3b75614c4d8760c037a5c26746410d4e4b17cb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque pipe object id type is now a pointer to
the associated pipe structure, rather than an index
into the microkernel's array of pipe structures.
This change is a pre-requisite to support for private
pipes, which are defined in source code.
This also moves the required struct into more visible
headers such that private pipes can be declared.
Renaming the struct is also being done to conform to
naming convention for private kernel objects.
Since a couple structs have to be moved anyway, so
do the moving and renaming here too (contrary to what
have been done in the past, with separated patches).
Change-Id: Ibb6ec7f62745a81439ae3ea2616688b757439843
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private tasks.
The code piggybacks to the public task test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private tasks test move the tasks inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I2890f70be460c0e45208ce03d6e7897d2662f6f0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_task_list was a static array generated by sysgen,
where it containing all pre-defined tasks from MDEF file.
To support private task objects (aka, defining tasks within
source files), the task list has to accommodate tasks that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all task
objects go into this section. By doing this, the task list
can still be manipulated as an array, which is required for
task group operation.
Change-Id: I799d6967567079498bc414e0cb809e8af856b53e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque task object id type is now a pointer to
the associated task structure, rather than an index
into the microkernel's array of task structures.
This change is a pre-requisite to support for private
task objects, which are defined in source code.
Change-Id: Idb53ea7f8a8a5b7e6477a74273930b08fc77dcfe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private mailboxes.
The code piggybacks to the public mailbox test (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private mailboxes test move the mailboxes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I52ccc5931b1abfd3ae3d654f888d4a019268bba0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining mailboxes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MAILBOX(mailbox_name). The mailboxes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
mailbox APIs.
Define the mailbox using:
DEFINE_MAILBOX(mailbox1);
and "mailbox1" can be used, for example:
task_mbox_put(mailbox1, &msg);
or,
task_mbox_get(mailbox1, &msg);
etc.
To use the mailbox defined in another source file, simply add:
extern const kmox_t mailbox1;
to the desired C or header file.
Change-Id: I32d4194af740f96fc8df8c6cd3144a0c9accb4ec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private mailbox support.
The struct needs to be moved into more visible header
so private mailboxes can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: Ibd75497e726efd447d27f3bfd0b4695ed1695693
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque mailbox object id type is now a pointer to
the associated mailbox structure, rather than an index
into the microkernel's array of mailbox structures.
This change is a pre-requisite to support for private
mailboxes, which are defined in source code.
Change-Id: Ide832eee2a0762e601847ad07afba380bd79ed8b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private FIFOs.
The code piggybacks to the public FIFOs tests (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private FIFOs test move some of the FIFOs
inside source code.
Change-Id: I4130ac540b10a31cd30f37890e9cc389af73e89b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining FIFOs in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_FIFO(fifo_name). The FIFOs created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
FIFO APIs.
Define the FIFO using:
DEFINE_FIFO(fifo1, depth, width);
and "fifo1" can be used, for example:
task_fifo_put(fifo1);
or,
task_fifo_get(fifo1);
etc.
To use the FIFO defined in another source file, simply add:
extern const kfifo_t fifo1;
to the desired C or header file.
Change-Id: I29667c4cfdcd0e6d189358478acf1a6149ecb826
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private FIFO support.
The struct needs to be moved into more visible header
so private FIFOs can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: I9b90ddccbaf01ff8c7e2ef03c926d0328dd7ec39
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque FIFO object id type is now a pointer to
the associated FIFO structure, rather than an index
into the microkernel's array of FIFO structures.
This change is a pre-requisite to support for private
FIFOs, which are defined in source code.
Change-Id: Ieb1343d6d5dd1b747063603457d47fab2710f557
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private semaphores.
The code piggybacks to the public semaphores tests (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private semaphores test move some of the semaphores
inside source code.
Change-Id: Ic318bf6808514c5d335a46cb3e88ebf6000f4c3e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining semaphores in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_SEMAPHORE(semaphore_name). The semaphores created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
semaphore APIs.
Define the semaphore using:
DEFINE_SEMAPHORE(sem1);
and "sem1" can be used, for example:
task_sem_give(sem1);
or,
task_sem_take(sem1);
etc.
To use the semaphore defined in another source file, simply add:
extern const ksem_t sem11;
to the desired C or header file.
Change-Id: Ia9c128648f7a26fc776eeb8f6fcc4158b1712a97
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private semaphore support.
The struct needs to be moved into more visible header
so private semaphores can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: I84ac7d580404ac5e1753c1bd446d38993fd23310
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque semaphore object id type is now a pointer to
the associated semaphore structure, rather than an index
into the microkernel's array of semaphore structures.
This change is a pre-requisite to support for private
semaphores, which are defined in source code.
Change-Id: I3821360be35237bfe3bf090efce84f99e335d309
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It is no longer necessary to generate variables containing the
object id each public mutex. This capability was once needed to
allow kernel code to reference mutexes generated by the build
system (i.e. pseudo-private mutexes); however, the existence of
private mutexes renders this obsolete.
Change-Id: I594be31268c9a336ae2a43d48c1b32dbf3d7cde0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This enable defining mutexes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MUTEX(mutex_name). The mutexes created this way are
the same, in functionality, as those defined in MDEF files.
They can be manipulated by the standard microkernel
mutex APIs.
Sample usage:
DEFINE_MUTEX(mutex1);
void one_function(void)
{
task_mutex_lock_wait(mutex1);
...
task_mutex_unlock(mutex1);
}
To use the mutex defined in another source file, simply add:
extern const kmutex_t mutex1;
to the desired C or header file.
[ DL: This is a slightly modified version of similar patch
by Allan Stephens available at
https://oic-review.01.org/gerrit/3255 ]
Change-Id: Ib9cd8193eaf849a8aad1d217912759324ee8818e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation to enable private mutex support.
The struct needs to be moved into more visible header
so private mutexes can be declared. This also renames
according to naming convention to be private kernel
objects.
Change-Id: Ifccb60a837b44e443be0b091c2df4f06373718fe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque mutex object id type is now a pointer to the associated
mutex structure, rather than an index into the microkernel's
array of mutex structures.
This change is a pre-requisite to support for private mutexes
(i.e. mutexes not defined using a project's MDEF file).
[DL: fix some whitespace issues.]
Change-Id: Ida419f1674df245f51a36d28ca7d4631239f1edd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This change removes the internal number-to-function mapping
of microkernel services. Instead, function pointers are used
to specify which service to use.
This is in preparation for private kernel objects. Before this,
only kernel objects that are defined in MDEF files would have
corresponding functions included in the final binary, via sysgen
by populating an array of number-to-function mapping. This
causes an issue when a certain type of objects are all defined
with source code, and never in MDEF file. The corresponding
mapping would be deleted, and the functions are never included
in the binary. For example, if no mutexes are defined in MDEF
file, the _k_mutex_*() functions would not be included.
With this change, any usage of private kernel objects will hint
to the linker that those functions are needed, and should not be
removed from final binary.
Change-Id: If48864abcd6471bcb7964ec00fe668bcabe3239b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
1. The new name aligns with the 'arch/x86/platforms/ia32_pci' platform
directory.
2. A shorter prompt works better with menuconfig.
3. Removes IOAPIC selection as HPET_TIMER selection makes it implicit.
4. Removes LINK_AUX_COMPILER_LIBS selection as it does not exist.
5. Removes CPU_MINUTEIA selection to permit CPU_ATOM as a valid choice.
Change-Id: I55694d2594a103f4f5ca233c279df0556ff1327f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This policy was in place for the old sanity checks, was simply
overlooked.
Change-Id: Id021a669b35622f9e9cba23b4417c5d0b7afc15c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This only disables optimizations for now, we should
be able to select more debug options from here.
it changes KBUILD_CFLAGS from -Os to -O0.
Change-Id: I84515356f8af006b724d706c0647a671db54a6b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
-C/--clean is now -n/--no-clean. Made this change since the build system
can't always do incremental rebuild correctly depending on what was
changed (such as Make variables).
Change-Id: I199e505693479184b2f197ddb584ade5eca1704a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Qemu implements HPET so that it is connected to IRQ 2, which makes
necessary to use it in legacy emulation mode.
Add legacy emulation mode to HPET driver.
Change the way the HPET driver is initialized. QEMU requires that
the mode (one shot or periodic) gets set prior loading comparator
value.
Add debugging mode to HPET driver to ease the next port.
Change-Id: I668325d5968451585519a08b6c41863cf6e37f88
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We only want to rebuild this if the MDEF file has been touched.
Otherwise, zephyr.h gets rebuilt with every build, causing
unnecessary rebuilds of application source.
Change-Id: If128da48c9688f043c467f6b163ec6cb3e1d952c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The bluetooth regression script now refers to PLATFORM_FLAG instead of the
obsolete BSP_FLAG variable.
Change-Id: I8cafc01b66004c7bdd76c03d3f3b6aeba134565d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
See
https://groups.google.com/forum/#!topic/ia32-abi/cn7TM6J_TIg
for more details.
• Support IA32 without FPU.
• Minimum ISA: Pentium ISA without x87 FPU instructions.
• Don't allow mixing i386 object files with Intel MCU object files.
• Support floating point with software emulation:
a. Long double is the same as double.
b. Use __float80 for 80-bit double.
• Minimize memory footprint:
a. Code size
b. Data size
c. Stack size
Here is the draft of Intel MCU psABI. The differences from IA32
psABI are
1. The minimum instruction set is Intel Pentium ISA minus instructions
for x87 floating point unit.
2. There are no x87 floating point registers.
3. There are no vector registers.
4. Segment registers are optional.
5. Support for TLS relocations are optional.
6. Scalar types larger than 4 bytes are aligned to 4 bytes.
7. There are no vector types.
8. _Decimal32, _Decimal64, and _Decimal128 types are optional.
9. long double type is the same as double.
10. float, double and long double types are passed and returned in
general purpose registers.
11. _Decimal32 and _Decimal64 types are passed in general purpose
registers.
12. Aggregate types no larger than 8 bytes are passed and returned
in general purpose registers.
13. Stack is 4-byte aligned.
14. The auxiliary vector support is optional.
15. Register %edx has undefined value at process entry.
16. New ELF machine code: EM_IAMCU.
17. New predefined C/C++ pre-processor symbols: __iamcu and __iamcu__
Change-Id: I6a0c45ad22d8f710b6f37a041aaa2fc1bf0b1c39
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If set, 'make qemu' will direct its console output to a named pipe and
disable the interactive monitor. Intended for use with the new sanity
check system which will parallelize test execution.
Change-Id: I902f77c02ed3f210891ff13147afea890e64d9c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes CONFIG_CPU_PENTIUM4 and CONFIG_PLATFORM_PENTIUM4 as Zephyr does not
support the Pentium4.
Change-Id: Ieb1970894eda184f4c33d03e3563fb08f861ec6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces the default executable target (generic_pc_minuteia) with
generic_pc_atom_n28xx. This ensures that sanity testing can evaluate
two different x86 processors just as it did before generic_pc_pentium4
was removed.
Change-Id: Iad439d8465811e9e45f02e9516ce3e6d65d7c1ed
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Marks the generic_pc_atom_28xx platform configuration as a default executable
target. This is desirable as the removal of generic_pc_pentium4 removed an
executable target from the sanity test suite.
Change-Id: Ic990a003ff23367199164dfcc434c033d78abaac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the generic_pc_pentium4 platform configuration from the sanity tests
as the pentium4 is not considered an essential target for Zephyr.
Change-Id: I804ad44c4157f40a501ae56b928b57b2003d2415
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update microkernel systems to use the new driver initialization model on the
timer driver.
Change-Id: Ida9ef2a395d0dddf4104d490d78b13b11ea3c347
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Prepares the _sys_clock_driver_init() routine to interface with the new driver
model. To this end, it must accept a pointer to a device structure and return
an integer.
Change-Id: I3c600ce1efb49c0864aae7b09663ca40d6289372
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The USERDRIVER line is currently unused, and recent driver
initialization enhancements have rendered it obsolete.
Change-Id: If14089a52871a8891223156fde99b3fc9b650b10
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since SysGen generates the code to invoke _sys_clock_driver_init(), the build
system no longer needs anything from the config1p.mdef files.
Change-Id: Id22615ff137c9d146ccc5c3777a75b2d3bfee73a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
SysGen generates code to invoke _sys_clock_driver_init() when
CONFIG_SYS_CLOCK_EXISTS is defined thereby reducing the number
items the user must remember to configure.
Change-Id: I6f6909378c8a865a6ef50a99179800d58be5dd68
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: Ic8b1d4673862263d90d240e749a272d01a53679e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These private APIs now follow Zephyr OS naming conventions.
Change-Id: Ia11a082e46456d12a3d6af7dfb2f34c29c137cb2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These private APIs now follow Zephyr OS naming conventions.
Change-Id: I63815013be2d3b01463563d17f05aac28b27ce04
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates maintain-checkpatch.bash to ignore the gerrit ID in the commit log.
This helps reduce the noise/false positives when using the tool.
Change-Id: I2d6f3c501abd1ffd541fb8d0fdf7cbc7f37830b6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes Makefile.x86.preparch so that the ISA optimization passed to the compiler
is based on the CPU rather than the BSP.
Change-Id: I78e4ad10fbc3d25a20367ccd3c4df39ffbfa8380
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Restore original behaviour from before moving to kbuild
Change-Id: I299ad25cf39378b2537e0791cce65f077c5d1c08
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The new name better reflects that this file contains private
microkernel APIs (types, structs, etc.) that are used by various
kernel subsystems.
Change-Id: I7a89be893455b3daaf30baa40a0ec8e0cde7cc36
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of the Python file extension, since the fact the code is
written in this language could conceivably change someday (and
doesn't really need to be advertised to anyone invoking it).
Change-Id: I0d01a89fd25e4a0f033099a4bcea674bc302c658
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes name more consistent with CPU_CORTEX_M3_M4 option.
Change-Id: I6f0a14322b7774df54a3459f91cd3acf07819b04
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with CPU_CORTEX_M3_M4 option.
Change-Id: I0b89a50a5c0b728167cd76219d25ddf98243c0dd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This reverts commit 5e56c21dfae2e08253820f7fcad1e96be009ca89.
Change-Id: Ie4e0c2afe27937206230e5574c41e5a4a4c3d616
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit ecf5bd8048b683f119e867e85c1693955694b33d.
Change-Id: I51717ad96f312be1f116534f6b79d599bf0e5b4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to easily checks if all samples builds with supported
configurations. Also tester application is (unlike other samples)
build with all Bluetooth debugs enabled.
Change-Id: Ia151b97d14c75b0509243e2c1dc8d26211f70e83
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add build test for beacon app for following targets: pentium4 and
ti_lm3s6965.
Change-Id: I4b8949b4f21d3554465bbf8c229462c026db5e29
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
export TMP if you want the out of tree tests to write
to something else other then /tmp
Change-Id: I77b1dffe5fa5e61db66a8d754370a0cd47511ab4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fix an error with the clean targets.
The package directory does not exist anymore.
Change-Id: I415085cb35eda9a1f30d6b53a5529e1fb2a8447a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Kconfig creates a header file per each Kconfig symbol that changes
in between configuration changes and rebuilds.
This commit creates the files in the output directory specified by the
O environment variable.
Change-Id: I01b3482e9497f70961268505865788385b41ca8f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Enables sanity to run out-of-sanity checks on a set of sample projects.
Change-Id: I58ae894b326a6eb15d6d56bc8e95738d21e17245
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Deprecates (and hides) the -B option in favor of using the -P option.
The -B option is used to specify the BSP, whereas the -P option specifies
the platform.
Change-Id: Ie1d3cd6383f08a84e5d994221b253153152a0658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The -s option to sanity_chk became obsolete with the switchover to Kbuild.
Change-Id: I6ab68692aea39e4289520613b53a46320044fcfb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The sanity scripts no longer use the deprecated method specifying the BSP (and
the optional BSP_VARIANT). Instead, they now use KBUILD_DEFCONFIG to identify
the target platform.
Change-Id: I583f876afd006e66fc314b8913cd766ba9d2b764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Completes the separation of data from the sanity scripts.
Change-Id: Icc7a4922d5f108ca54d2c2f08b192259b07b3a0e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These data files will eventually replace the project list tables that are
currently defined in the various sanity checks.
Change-Id: I1b9aef528ff2acc1ba96fa540986c50e01032f68
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the set of strings stored in $PRJ_TYPE from
{"microkernel", "nanokernel"} -> {"micro", "nano"}.
The $PRJ_TYPE variable will be used in later commits to create the
$KBUILD_DEFCONFIG string.
Change-Id: I9e2d866d4277ffaccff4f84a42ec2bc75c2ce57a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the Bluetooth regression script 'bt_regression.sh' so that it resides
in the same directory as the other sanity scripts. It also renames it to
'bt_regression_chk' so that its name is consistent with the other sanity
scripts.
Change-Id: Ia5a683e2c370c91a90edc648634ce56e484dcc20
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
KLIB_DIR builds are a relic from the previous build system.
Change-Id: I382db45f0a21786e1b7c50c9a881c82feb2c7481
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Fixes sysgen's python code errors generated during build.
On python2 environment it's ok but *not* on python3.
Change-Id: I4a042c5d5203e546b65540f7020ae75677d102f8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The following APIs now use an approved Zephyr OS prefix:
_pipe_init
_mem_map_init
_mem_pools_init (also loses plural aspect)
init_node
init_drivers
kernel_init
kernel_idle
Change-Id: Ic380c56b09cb870d44c51fd12c6c0e0a13e9b4e3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: Ia16829d908da9bfaa82f82da47b583a0004cae7d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no longer any need to retain any support for this option
as a "do nothing" for backwards compatibility reasons.
Change-Id: I4b8fa727f80effdcc3fd92007fc9c50654291175
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Remove excessive use of zephyr and use a more generic
terminology where possible.
Change-Id: Ida8916765dbe824f63d7a4cedba60b35d14aee55
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not all GCC toolchains generate a fully linked image (non-relocatable) when
using ${CC} for linking.
Change-Id: Id99501b6510cd6eeb87f245a6273fcebd6d36cde
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Informs the 'xtools' toolchain where to look for the libgcc.a library when
linking.
Change-Id: Ic990f1522dd8ddc9c5baf1366505e49929130969
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Some compilers default to a value for -march that is incompatible with the
specified -mcpu setting.
Change-Id: Id94fc6666efe86ab511cf2320bf07b2eb70d72ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Aligns the default version of the xtools toolchain to that specified by the
x86.config and arm.config files under 'scripts/cross_compiler'.
Change-Id: Ib05766871a85de98c5ead19e15d740073f2f42cf
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Mostly files related to kernel modules and scripts used
in old build system.
Change-Id: I12dfe4c976b0f6f933b519bd7eb96148f689535d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates this environment variable to reflect the new OS name.
(Note: Out-of-tree builds are not yet supported.)
Change-Id: If26264c39a98d76c418f07be88ecb196f34fba1c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the build system now supports only one toolchain, the
VXMICRO_TOOL environment variable is obsolete. The sanity
check scripts that reference this symbol are revised accordingly.
(Note: As a temporary measure, the main sanity check script
continues to accept the -T option; however, the option has no
effect.)
Change-Id: I383b128b9f5b07164abb7ddeb5a699d819a20316
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updates this environment variable to reflect the new OS name.
Change-Id: Icc6a2f3d4cdfcf7cab11da7920aaa8110177047b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of references to the obsolete OS name. (Note that removing
the build system comment entirely makes sense, since there are no
other comments for anything else in the file.)
Change-Id: I4473b016c1c85be48ac9ab8d5b8f6a5b11dd58d0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This commit fixes the issue of kbuild creating empty header files
at the include/config directory.
Linux Kconfig creates a header file for each Kconfig symbol that
changed in between build runs and re-configurations. This feature
is not needed in Zephyr.
Change-Id: I366183cef398b3ab7488456ddbed07f292c5a9bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the generation of the binary kernel files:
kernel.bin
kernel.lst
kernel.strip
Change-Id: I7e1aab494ee1143994b4b65d0991906fbe8a36df
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Hoists the initialization of the the microkernel's idle task's stack fields
out of the runtime and into sysgen thereby removing microkernel code from
the nanokernel initialization.
Change-Id: I54cbbec9e875a52b5fa52562e1a2770cd3ac1cc3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the kernel defined stacks to ensure that they are properly aligned
by using the __stack tag.
Change-Id: I8514d38ee2e5bb2b2d87b17021db3c7f9c36a772
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The __attribute__ keyword is toolchain specific.
Change-Id: Ia3c0ff54d778785679c864704f8db6a3ba898948
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The use of VXMICRO_BASE has been supplanted by TIMO_BASE.
Change-Id: I905232a8d87145afb2f8df30b5f9056ec72ce045
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The toolchain-specific macros used to generate absolute symbols
are now part of the main include file for that toolchain, since
there doesn't seem to be a good reason to have them in a separate
file.
Change-Id: Ic97800485b20d6c5b23d14f69f67ee845cf076f5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Test project is no longer needed, since the associated library
is now scheduled for removal.
Change-Id: I843018e647c4bdc82c785ae21dbfa9de608c0d50
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
To support multiple versions of the compilation tools GCC etal the
original Kbuild would execute the tool to ascertain if the argument
being added to command line was compatible with the version of the
tool installed on the system. This causes significant overhead and is
not required since we specify the minimum version of the tools
required for the build.
Change-Id: I23d811bee9e89bf7549449c679adbfa02efd94de
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Fixes missing qemu flag and when adding Bluetooth -serial switch it
became the first UART.
Change-Id: I85f4bf236383a288f2935f6455141fa7b18c3ac8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use patches qemu binary provided by the Yocto SDK.
Change-Id: I5edc2338f45fdd0d953d8d34bea648d0d18d8bf8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit allows the tools build to be executed at TIMO_BASE
directory insted of being executed at the PROJECT_BASE.
This allows the sanity checks to run faster because there is no
need to recompile the tools with every test.
Change-Id: I9e9ac78695db884b44e2693029e9ea6ed96b21c8
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit enables the outdir directory.
Kbuild output files will be generated at the outdir directory
inside the project directory.
Change-Id: Icec04aca1753326c9d50dea20c71850c1d8c3dd0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds changes to the shell scripts to add
compatibility with bash and dash shells.
Change-Id: I7831eba24afca2211cd58aab996dee13a02207f3
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Right now we are building minimal libc as an archive (lib.a)
and do not need to link against -lc -lm in that case.
Link against libc/libm only when using an external libc.
Change-Id: I1af0eaf5c059bd5f0c8c16cda28114c6dc10b156
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This options allows us to link against newlib instead of the
integrated minimal c library.
Change-Id: I20990354d74c08f2f6348f0aeea452b8f0f4c8e9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows a toolchain to define the auxiliary libraries in
scripts/Makefile.toolchain.{variant} with more flexibility.
Change-Id: Iaae9c7613ddcbcc8376b7e756aa4b675db680737
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the variable LDLIBS_TOOLCHAIN that, by default,
add the gcc static library to the link command.
This variable can be overriden as an environmental variable or as a make
parameter to allow the use of different toolchains different from gcc.
Change-Id: Id9d6c8621a7dc8feebdf377c115564701fb7652b
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
awk is causing issues on the ci infrastructure, some
options used here are not supported on ci hosts.
Change-Id: Iabd5dd37b6464e093d3f91188128ef85a9fc6df5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To use this, export the following:
export VXMICRO_GCC_VARIANT=yocto # for yocto
export VXMICRO_GCC_VARIANT=xtools # for crosstool-ng
export YOCTO_SDK_INSTALL_DIR=/opt/poky-tm/1.8
or
export XTOOLS_TOOLCHAIN_PATH=/opt/crosstool-ng
Change-Id: I9cd6062ecc32047d1582aad46209f4232e0e31f6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit reverts the removal of bluetooth tests.
Change-Id: Id84bb6b61da1fd8b617059be2b1617a6dacf2af9
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit allows the following:
lib-y will create external directories, when building with
the O=<external/directory>option.
Originally in Kbuild, only obj-y dependencies were subject to
directory creation when builded in an external directory.
This change allow Kbuild to completely build in external
directories, including libc.a.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: If6c2bc77b2c00ce199df87a08f86e366f929ac08
This commit changes the way libc is built.
Instead of building a hierarchy of objects linked into the
microkernel, libc minimal is built as a static library and
linked against the microkernel binary.
The location of the libc is configurable with the variable
KLIBC_DIR. This gives the flexibility to build against a
different libc other than minimal.
Change-Id: I9c0b6a684a9f3b407861aa387727c45eceb269c4
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Make the script work with the first set of testcases.
Works continues as we fix more samples.
Change-Id: I48b77781fc162971a1ef83bed32c02c2b08f81d7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the gcc library to the linker process
of Kbuild.
Change-Id: Ic237dedc7b28dae020e4778c9b373ac650e31bad
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit includes the genIdt tool as part of the kconfig
basic tools. Now the genIdt tool is built automatically as
part of the whole kernel project.
Change-Id: I45110a7c564c59d7a6684d868ccc377cbd6ef1c4
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit allows to select a VPFile outside the working directory.
This change is needed for sanity checks.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia6f1e334c0a5274c4029197e5f64aaa4c236f9f0
This commit removes from the Kconfig system the
SECTION_GARBAGE_COLLECTION kconfig symbols and sets the
SECTION_GC_FLAG flag permanently on the compilation options.
Change-Id: Iec070613d85afa697c62d6cbc54cc146cffcab27
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes the issue that the iSSE_FP_MATH flags was
not being added during the build process.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I0702e8b317fde1858e90145efaa470146ad5a416
This commit fixes the issue that ALIGN_STACK_FLAG was not being
added to the build process.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Iced7700b51da4c5b04181affca2f2ca090987371
This commit fixes the issue that ISA_FLAG was not being
added during the build process.
Change-Id: I780c8dbae8912ee8e159827cb24a5700432898d2
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Start with a new linker file every time we run make. Otherwise
we fail.
Change-Id: I3abe9c203dcfe8710e6c4946662959bfeb6a6bc9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds support for the qemu target.
This target will generate the kernel binary and will
launch a qemu instance running the binary.
Currently, only the x86 generic pc and the arm tilm3s6965
BSPs are supported with emulation.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I9e71d3ce2fba98572830475a2e15e3fceb0216b4
This commit changes the name of the output files.
The output names tinymountain.* have been changed to
microkernel.* and nanokernel.*.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia73daa35bb8e44972065af3a217bf87335169dac
This commit add support to the Kbuild system for the
NUM_TASK_PRIORITIES Kconfig symbol and the corresponding sysgen
parameter.
Change-Id: I6b035437c86d62f72c25d696d18182a7b0448e8f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit allows the Kbuild system to specify the
Cortex processor as a toolchain link parameter by
reading the kconfig configuration options.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I29296fb255810b6bc5e14637c9000e054ac5deb2
This commit fixes issues to allow build on ARM architecture.
- It fixes the include paths in Makefiles.
- It fixes the include path for the offsets.c compilation.
- It fixes the linker command. This changes is needed because gcc
ARM cross-compiler does not accept an AT() command without
specifing an address explicitly. This corner case appears
on ARM architectures when XIP is disabled.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ief8b53c4cc154abba7b7827121ec5a56f62b7b26
This commit removes the Kconfig symbol KERNEL_DIR.
The symbols was no longer needed because sysgen is only
used on microkernel architectures and the value of
KERNEL_DIR is always "ukernel", therefore it is redundant.
Change-Id: I5e38dd431c5b6f7586e8b25aea330632e96f581f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit substitutes references to the linux string in variable
names.
It changes the LINUX prefix and uses the TIMO prefix (short for
tiny mountain)
It changes the vmlinux prefix for tinymountain prefix.
It preserves linux references found in licenses, comments giving
credits and from scripts that are not supported by the current build
system yet, like rpm generation.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id17d8d12161f00e2a2ff38f218cdb6c5afd169c0
This commit is adding the linking process.
-Creates linker command files.
-Creates IDT tables.
-Creates final ELF file.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I3ce92868b00957fdc24a361cc419e3548f475cc3
This commit adds all Kbuild CFLAGS to build the kernel binary.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia4ca1b71b4e68c4515c428147a8814ca983bb541
This commit organizes the different directories listed in the
root Makefile. Each directory hold a root Makefile describing
libraries and object bundles that will be linked together as
the kernel binary.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I4af16114598ad985dfb4faac68e82dc73b1b6cc5
This commit adds the target to generate the offsets.h header.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I6222f7478ade33f5ca130eea8637cb454b67eaab
This commit adds the target to generate the configs.c source file.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia068a20c3b76c78f5bdd041f6e19daabd2107a5a
This commit adds the target to execute sysgen.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I31f2e896274fa5ddfe6c10b4ccfb07ff6704c130
This commit adds the target to generate the configuration file prj.vpf.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I407b304d33fe27daf92e6049377930cca484fde5
1) Now invokes pipe routines directly, without the use of function
pointers.
2) Eliminates unreferenced _DEVICE_CHANNEL symbol.
Change-Id: I6e26476265ed8f33febb5a06c9d03daf7147ee5e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Keys off variations of "ICC" to remove references to the Intel C Compiler as
it is not supported.
Change-Id: I09f67880b39839982ed1c450e564c274440628a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames the include file defining non-public microkernel structures
from k_struct.h to kernel_structures.h, and relocates it to the
microkernel's non-public include file directory. This means that
applications and drivers including the microkernel's public APIs,
using microkernel.h, can no longer access non-public information.
Note: This change also eliminates some redundant #includes by the
microkernel's own subsystems, since the inclusion of minik.h brings
in the vast majority of public and non-public APIs.
Change-Id: Ic7d9ec1ebb8a124ccd0aaad98b50e16c197ffa00
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Eliminates declaration of variables that are already being
included by a microkernel subsystem include file.
2) Eliminates duplicate declaration of timer_driver().
3) Moves definition of well-known events to the event-specific
include file.
4) Moves declaration of a task-related routine to the task-specific
include file.
5) Moves declarations that are only needed by kernel_main.c
to kernel_main.h.
Change-Id: I6f387915a5ce208879482522586b977118f657e7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Only pentium4 was tested with the default sanity_chk, since it was
listed as the default platform on every test.
The ARM platforms were already taking a different approach: if the test
is runnable, build and run it for the QEMU platform (ti_lm3s6965):
otherwise, build it for the real board (fsl_frdm_k64f), since running on
that board is not currently automated.
Do something similar for x86 platforms: when runnable, use either
pentium4 or minuteia on QEMU; this gives coverage to minuteia. Also, for
a couple of build-only tests, build one for quark and one for atom.
Change-Id: I2f80a835d8f9b6df020bc8a2ed966e6d47c51e2e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These symbols are no longer part of the microkernel's public API.
Change-Id: I0dfa32af02cfa71fb31997b9bcdac60208d93888
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The generated file now takes advantage of the fact that including
vxmicro.h automatically includes the microkernel's public APIs.
Change-Id: I17879b8f209c67ad159405aca16770af8e099fb0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Sysgen no longer needs to generate two different include files
containing the various definitions available to applications.
Note: This consolidation also eliminates the generation of
an obsoleted symbol of the form NODEx.
Change-Id: Idf28efba95193037d04603498e9e956638027ed9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now declares task entry points in the generated kernel_main.c,
which is the only place that needs to know about them.
Change-Id: Ifa2ebf64ced26e71387d6fd8350893205d6961a0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no longer a reason to expose information about the
internels of the microkernel's event subsystem to application
files.
Note: The one sample project that tests event processing now
explicitly declares any non-public event APIs in requires.
Change-Id: I4c3f85a7b0bc485713c21424a923102b4f400ced
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Using 'python' instead of 'gawk' for the 'truesize' has several advantages:
- more people understand python than gawk
- python script is easier to maintain
- lessens the number of tools on which the product depends
Change-Id: If6780b530e28867d89939e09b81b153a960004b2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new targets for sanity_chk script: fsl_frdm_k64f and ti_lm3s6965,
this would add compile tests for mentioned BSPs in sanity check
script.
Change-Id: I556f8e3a5048d2a58ab09b10197e0cc6fb3c8765
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: Ibbe8ebbab72abb02505f47a82c904f0e9460e812
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: I054c9500511fe40969127445444f85f3fe85902c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Corrects a PEP8 coding standard violation.
Change-Id: Ifcdb2ac8d57dd90d74c2f72e94a774c894935a17
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Sysgen now copies kernel_main.h into its output directory, so that it
can be easily included by kernel_main.c. This eliminates a kludge
that required kernel_main.c to reference kernel_main.h using a relative
path name.
Change-Id: I24fcfa6b70a44526a80f33619dd68ff0a7f7acc5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates and renames the include file which declares non-public
APIs needed by sysgen from the directory containing the microkernel's
public API to the directory containing its non-public API.
Note: Need to come up with a more elegant way for generated
kernel_main.c to access kernel_main.h, since the current relative
path approach is kludgy.
Change-Id: I5e4b07038e566f1f161001d676a3b0faa487a480
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Hides the existence of these routines from the microkernel's main
public API include file, but allows both sysgen and the microkernel
itself to continue accessing them.
Change-Id: Iaf1beff81d045e9df29eb07517793e4b4410f51e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the K_TIMER type is a non-public API used within the micro-
kernel itself, it doesn't provide any real type abstraction benefit
that isn't served equally well by the struct k_timer type it is
based on.
Change-Id: I482d7c0459d5734402be541322ff752dd1a3714a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Brings the name of this non-public microkernel variable into line
with those of analogous variables.
Change-Id: I17dc343faf2dc1ace63b5a3e8164ff08ddd60ebd
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Currently these tests are disabled in the regression_chk
application.
Change-Id: Ibf53b25a08201db0b50df7dca96f638b419ea4a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I855f3d468e5752abfe7a3c768c5a613566a697a0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ia753f8415b656e3b819a9cdb1eb24d02b750f9d2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The nanokernel LIFOs could only have one fiber pending on one of
them concurrently. If a second fiber wanted to take a contested
LIFO, if would kick the pending fiber out of the wait 'container',
but would not put it in back in the ready queue with an error. Instead,
it would, for all intents and purposes, remove it from the scheduling
mechanism of the nanokernel: the fiber would be 'lost' at that point.
The nanokernel LIFOs now make use of the fiber pend queue, and thus
allow multiple fibers to pend concurrently.
sysgen is updated since the microkernel initializes statically two
LIFOs, one for the command packets and one for the timer packets, and
the LIFO data structure has changed.
The nano_timers use the LIFOs and look at their internals, so they are
updated as well.
Change-Id: I250a610fcdee9d32172c88d38e6c3cfd5b437d15
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The microkernel server's stack area can be defined by the kernel
library itself, without relying on sysgen to do it.
Change-Id: I9359946ce9ca9138970db4e264fd25d8b92034c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Shorten API name by removing extraneous wording.
Change-Id: Iff67c4d7e82b7093e3d4d8a7ce61a3011e0ff517
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the microkernel now supports only a single processor, there
is no longer a need for a means to identify it.
Change-Id: If5b2d8e114d8a3bfdd597bc23d70be5e1fa2238c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The test registers Bluetooth driver to Bluetooth the subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I39526acbb25e7d4bb322d4511659a40505874592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to the Bluetooth subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I1b324c82ce8be2ce73f2b41a07135b0bc76eed61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Revises sysgen so that it doesn't generate timer-related variables
or executable code for a tickless microkernel. Also corrects some
misleading comments about dependencies on timers.
Change-Id: I5655e32fcab22d9991f2f8e0f2db9557642b6b54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allows the number of task priority levels supported by the micro-
kernel to be configured, rather than fixing this value at 64.
Setting NUM_TASK_PRIORITIES to N provides support for task
priorities 0 (highest priority) through N-1 (lowest priority).
The lowest priority is reserved for the kernel's idle task.
This enhancement allows system designers to significantly reduce
the size of the microkernel's task priority queues by eliminating
unneeded queues. In systems requiring only a few task priorities
over 500 bytes can be saved.
Change-Id: I497aac608a3d548fb1b024068c08a5f494c3d524
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Corrects issues introduced by recent global variable renaming that
resulted in lines exceeding PEP8 guidelines. (Running the command
"pep8 scripts/sysgen.py" once again reports no issues.)
Change-Id: I6dff820bc3529cbffbc930c13e98171140c09a52
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Code coverage analysis required Simics (which is not supported).
Change-Id: Ifec09ee5699bcd1ea423eaf544ce060ec1dca04d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I6b3d61c9ae7b024bb82356678cc2fc1d433dd3bc
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I1a4bdbb5d7248896830ea25d2126b1bb9b918878
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: Id6215f2aaab918ce13e99909c21f67647cf7229e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I9f3fc202c580d158a18737ff0f16a25952902ae4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I0eb8925e53f00b7993374fd8ed3e6ac950dfc1ef
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I6e0edb61dcac091f87c9ffc8fd8bf507ba075367
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I5f879ff27f8b7d02ab148cb05dd1916a831a51a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I79b03884f154507aa22c42c3c89136c202c2c9e0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: If7f5e78d6dd5492dbbbcc080c2e822f33eb1c967
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I3de0a16879f142ef20830dfc429c989f10c2cd92
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I628e057f54eb72901c3753b6b8b4849c4cd046c0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating micro kernel functions to follow a consistent naming
convention. Part of that process is the removal of camelCase
naming conventions for the preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Change-Id: I02122837d74c9d7c5c406e644feda6923b5161f2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I56ee3d3ab6d1254359adcffa4d86c1bf2e20537a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idcd3b4dfd86b6e835638623fa7b39401cabdee06
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I0a807704a81b1faf4b79fe3832830c4994795fe3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I175a8bcd29e21d64de735fba9a2e2ee2bc57993e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic81b4ad7edf476da61ae62df627866e0446714d7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I10a1bff593c56cf6703920b9feccd10e32cc65ef
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I413e59e0200c2b8eba1bee79e444b3492de8fb7c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifdfb9042ff4e83f6d7a8430d47c573b85eca9048
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I77d459388aa26eaa52d0f59234d761f3ca7d1496
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: If9b4747ffa6f9dae4cb77717931fed445ae43721
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I8996c427a98f542052b40bcc9f623c05f6d9bb21
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2045fab9f67fda6f0d26a53d47561a705046d4db
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I719d6f1a89b343d149eded7227534ee30055e030
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ibe83bc837cdae54cf553b80efd989ad321447873
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I12ab3ee4111a32afc674b654bf0a914012ec0318
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iafa862861cc6b56212c036acc0bb182e2c620e7b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1b3cb984fa75cd1a83649c81787a40aee97f8a32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4c27dd98967dedbb15e28618f5dd8f26b919579d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idff77a32adb875789a57d2c9131b87769bf6f174
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iad6d39bea0da42633e40e7e7d5b64d2a05efbad0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifb54b2dbdc726e87b10c33776c0d1815d56776cd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
When killing QEMU, we defaulted to either killall or find the first
qemu process. This intefered with parallel builds, as we might kill
some other build's qemu process.
This makes QEMU write a pidfile in the local outdir directory and kill
only that when done.
Change-Id: I498b1e0833fcda9a7bd50111616dfba015e566bd
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The host server channels are not used; their function pointers are always NULL.
Change-Id: I7616499f5695b83a015e6ee18c004aba96838d63
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The files k_boot.h and flashboot.c are obsolete.
Change-Id: Ieab69e714462079c2a836dacb7c5bab53d2e3b2b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The 'Dest' field in the 'k_args' structure is only relevant to
a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I6942f503af6ebadd62a2bf10b2a3bd0c81850bb8
Now terminates process with an error message if there is a mismatch
between a keyword and the expected number of arguments that follow it.
Change-Id: Ib1902161937cae482e52be449c89789f8ff816a5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
System generator now terminates with a non-zero exit code when
it detects an error, allowing the build system to detect the failure
and terminate the build.
Note: Sysgen only detects invalid keywords at this time. It would be
nice if it also detected other syntax and semantic errors.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds blank lines to kernel_main.c output file in places where
unrelated variables were juxtaposed. Also suppresses an unwanted
blank line that occurred when no project-specific events were
defined.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes the generation of kernel_main.c more consistent with the
generation of the other two output files.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The routine that appends data to kernel_main.c no longer adds
a newline character, similar to what is done during the generation
of microkernel_objs.h and vxmicro.h.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Reworks output directory name processing so that it is invoked
at the bottom of the file, just like the rest of the program's
mainline. (It's previous location wasn't incorrect, but it could
be easily overlooked.)
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Relocates a handful of functions and global variables that were
located in places that were logically inconsistent with most other
functions and variables.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds, removes, and revises various comments to make it easier
to figure out what is going on.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes cosmetic changes to address all issues reported by
the pep8 Python programming style tool.
Note: All future changes to sysgen should be run against pep8
to ensure no new issues are introduced.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Due to interrupt locking for ARM is not implemented by QEMU we provide
a temporary solution for internal purposes that works for the BSP = ti_lm3s6965.
This patch applies to QEMU v2.1.
Change-Id: Id14b66a18d02c53280c19d9a11fcf99256b3f5fb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding copyright header to the file script/do_checkpatch.sh
Change-Id: I3160a68b6715ea35aa6c1d3529e2b2483bb44b5c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
QA related scripts should be either maintained out
of the tree or come as enhancements to the sanity check
scripts.
Change-Id: I6dceed81f66b84cedad2dd84fd42d6b388de3468
Signed-off-by: Anas Nashif <anas.nashif@intel.com>