Define the priority reserved for the idle thread rather than use
K_LOWEST_THREAD_PRIO.
Change-Id: I514296d774047fa1348249da8ee90a68b6aace17
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A race condition would happend if a FIRQ interrupted a
return-from-interrupt from a RIRQ at the wrong moment: if a decision was
already taken which thread to context switch in and the FIRQ woke up
another thread of higher priority, the ready queue would be corrupted.
The solution is to lock interrupts at the moment the interrupt return
code starts looking at the kernel queues. Interrupts do not need to be
unlocked before exiting: the return-from-interrupt (rtie) instruction
will restore the correct interrupt locking state for the thread being
context switched in.
Change-Id: I777665c2faeca7b1f2a77ddd9ee2a520080bae88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The main task uses stack-hungry() printf(), and the switch to the unified
kernel pushed the necessary space over the edge.
Change-Id: I7b64e7f09d91c5050ffe7fb18506ff24289169fc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For systems that have both high base (CPU, bus, etc.) frequency and
small divider of the base frequency for system clock and this way,
do not allow 1 second period for the system clock, set the system
clock period to 0.1.
Change-Id: Iafb4604112d4adb8430f8bf57a5a31de3f6cf91d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Since the mutex can not be unlocked if it is not locked, fix the test
and make sure that it unlocks the timer exactly same times as it locked
it before.
Change-Id: Ie29d308b789ed00f4fd3cf2faef3aa1f4bc89e3e
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Add an assertion against unlocking mutex that is not locked.
Change-Id: I1032fb904e364015b486502c035529c8fe31de7a
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The Quark SE C1000 BLE Core is a nRF51822-QFAA, with 16kB of RAM and
256kB of flash. The configuration is otherwise similar to the Arduino
101 BLE, except that the UART RTS pin is the same as that used by
nrf51_pca10028.
Change-Id: I88cb18876bdde65abcf9a499894f70802046c824
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add type cast to prevent overflow.
In the pwm driver function pwm_qmsi_get_cycles_per_sec(),
there is a multiplication which takes ticks_per_us (32 bit
unsigned integer) and USEC_PER_SEC. Practically, overflow
will not happen, since the sys clock is not that high. But,
it can trigger an overflow alarm by automatic tools.
Change-Id: I67e6f6a4763e62f6674fcdd364880d93829e739e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add delay to wait for new configuration to take effect before
returning to API caller. It takes time for any change to rtc
configuration to take effect since rtc runs under a much slower
clock.
Of course, we do not have an equation for best wait time.
The value is based on the test results on arduino 101, minfield
and quark se c1000 devboard(some margin added).
Jira: ZEP-991
Change-Id: I0dcee3c5809963dcd418186b85e3473427a4d526
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The SPI_0_CS_GPIO and SPI_0_CS_GPIO_PIN values were defaulting to
something not very usable, because of which e.g. the file system
test app was having to explicitly set the right values in its sample
configuration. Having a proper defaults in the board defconfig means
this isn't needed anymore.
Change-Id: I1399914451c1616588322e25304d40d3dd1151e7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a simple shell that allows exploring the contents of the file
system.
Jira: ZEP-1235
Change-Id: Iaa49f0be18980dd740e9552ddf4761196a818884
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Similar to C subdir-ccflags, enable similar C++ variable subdir-cxxflags
Change-Id: I4355817bc2d6a80a3eebba9b87fbf54725dda5e7
Signed-off-by: Sakari Poussa <sakari.poussa@intel.com>
Test was not completing on CONFIG_DEBUG=y setting, current filter
sets custom stack size for such setting
Jira: ZEP-1203
Change-Id: I3a6ada88bc2e8a1fee757773c4b19b72551926a7
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The bitwise AND operator was being applied to the boolean expression
"!shared_data->flags" instead of the whole expression because a
parenthesis was lacking.
This bug has been found using Coccinelle using the following spatch,
after finding a similar bug somewhere else in the code base:
@@
expression E1;
expression E2;
@@
- !E1 & E2
+ !(E1 & E2)
No other instance of this defect has been found with this spatch.
Change-Id: I6b9ca092f4015c80ddc83c31ce540a92e67cdb11
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
C++ support moved from nanokernel.h to kernel.h.
Change-Id: I5e1631941e26f4ab3f311b680267b743bab15e40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ztest code redefines this as C function, which causes problems when
it appears in the legacy.h header as a static inline function.
Change-Id: I3ed9fbece3a304f706857a16bdca8dfb11a7802c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
include/ will be cleaned up in a subsequent patch.
Change-Id: If3609f5fc8562ec4a6fec4592aefeec155599cfb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Import the STM32CUBE files that will be used for the support
of the STM32L4xx series.
The files were taken from stm32cube_fw_l4_v152.zip.
Origin: STM32CubeMX
URL: http://www.st.com/en/development-tools/stm32cubemx.html?icmp=stm32cubemx_pron_pr-stm32cubef2_apr2014&sc=stm32cube-pr2
Version: v152
Purpose: Introduction of STM32L4xx SoC definitions
Maintained-by: External
Change-Id: Ib33a86aa35168827ff2d47f0793554fe35945762
Signed-off-by: Fabien Parent <fparent@baylibre.com>
An implementation to flush multiple d-cache lines has been added
per the top-level cache.h API. ZEP-1153 was opened to express
the need for MORE i-cache and d-cache APIs. For example, the current
cache.h API doesn't provide a means to invalidate d-cache lines
and has nothing for i-cache.
I've also modified some of the i-cache related aux registers to have
better names so that they won't be confused with d-cache.
These changes are for
ZEP-1176.
Change-Id: If4c5410451cc40dcd5618fc871093c8febf7e061
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Symbols now use the K_ prefix which is now standard for the
unified kernel. Legacy support for these symbols is retained
to allow existing applications to build successfully.
Change-Id: I3ff12c96f729b535eecc940502892cbaa52526b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This KSDK flash shim driver supports the device in the FRDM K64F
platform (enabled with this commit).
WARNING: the driver disables the system interrupts for potentially
long periods of time. This is required to avoid Read-While-Write
issues since most platforms run in XIP mode.
For more detailed information see the link below:
http://cache.freescale.com/files/32bit/doc/app_note/AN4695.pdf
Change-Id: I70f8d09080251033ce2f45be0c2eb95c19fded08
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
ALL_LIBS is used by applications to introduce extra libraries to the
build. Currently zephyr is not relinked when the library is altered.
Fix this the obvious way by adding ALL_LIBS to the list of zephyr
dependencies.
Change-Id: I2d1914fe1b968f488082264d362d8dadfba0f7b2
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
To avoid conflicts with the definition of "FPU" by the external
cmsis sub-system, the symbol "FPU_LEGACY" is now used to denote
the FPU task group. (That is, the group of tasks that utilize
the CPU's floating point registers.)
Backwards compatibility impacts:
* Microkernel applications that define private tasks using the
DEFINE_TASK() macro must now use "FPU_LEGACY" to indicate
that the task is part of the FPU task group, rather than "FPU".
* Applications that perform operations on the members of the
FPU task group must now use "FPU_LEGACY", rather than "FPU".
(Note: There is no apparent reason for an application to
perform such an operation, so this is unlikely to impact
existing applications.)
Backwards compatibility non-impacts:
* Application MDEFs can continue to specify "FPU" when defining
a public task that is part of the FPU task group.
* Applications written for the unified kernel are unaffected,
since the kernel implements task groups differently.
Change-Id: I972eecbc7b50d66f0a4f095d2d5177b5ce90cb71
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
It's unused anywhere and unlikely to be in the future.
Change-Id: I57926e91da7d31ef6ddda4f86e6dac103dbfa176
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Board uses nRF51822-QFAA, with 16kB of RAM and 256kB of flash.
The UART has no hardware flow control pins.
Change-Id: I16ffeee15a1f5714c695dc8b38e77fb134ea7a0f
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Remove hardcoded use of crystal as 32KHz clock source and
20 ppm accuracy; and use the values from config for sleep
clock source and sleep clock accuracy value in Bluetooth
Controller.
Change-id: I1c0d53ecf8ad158153d5186a6680b5eb03d1641b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
We the unified kernel now sizes have gone up and we have some more
testcases that are RAM limited on small memory systems.
Change-Id: I4716a779fac86a420607ba716edd012976d14254
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the path to Bluetooth subsystem documentation so the right
reviewers get added in gerrit for patches that modify the
documentation.
Change-Id: I0f8049989afbd955599eddd6f7623a0574f033c5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Commit 4187822d08 removed some filters
at sanitycheck script that were previously preventing foot print test
to run on board quark_d2000_crb.
Added filter excludes such board from min and reg footprint tests.
Change-Id: I2a32e34b1af6d16b3da418cd3113c52b2369eb97
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
