This should be particularly useful with the recently added controller
assert functionality that causes vendor events with debug information.
Change-Id: Ied0df2ff414e08c11a73cca0afba4dc04b0b8625
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BBC micro:bit doesn't have UART HW flow control, so it needs to be
disabled to build for the board. The baudrate is also lowered to
115200 since 1Mbps is likely to be unreliable without flow control.
Change-Id: I1725a2a1e46cfbc0f57b4f5c4ee57ff52d9670e9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The right convention for help text is tab + 2 spaces.
Change-Id: I2722a8b33f5f74be110dc43fbcecc12841f0db84
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When retrying the request due to a security error that can fail but since
the original buffer was freed in the process the code can no longer verify
if the opcode matches thus it always fails BT_ATT_ERR_UNLIKELY instead of
using the response error, so this not longer cares about the opcode and
just use the response error always.
JIRA: ZEP-1195
Change-Id: I1149b993b97733ab5bb00f347e4f973647e0fdd4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When waking up from C2LP state, the timer needs
to be reinitialized as we cannot know the time
that we spent in that state.
In order to reschedule the user application, expire it
as soon as we restart.
Change-Id: Id38a0de71e148ae8d9024a36d3983ab57b1e40d2
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Leave the aon counter in running state after the test.
Arduino 101 loader assumes the counter is running.
Stopping the counter will cause the next app to
not start without a hard reset or power cycle.
Jira: ZEP-961
Change-Id: Ia88f0c642b1df8dc5e2b1ee6c55ff0618b6127d0
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The Zephyr kernel tree has imported or reuses packages, scripts that
are not covered by the Apache LICENSE.
As in some places it is not clear (there is no LICENSE file or way to
put it there), here we list them to ensure there is proper license
acknowledgement.
This is an initial proposal--I welcome feedback on everything,
especially where to link the documentation (kind of kludgy now) and
more missed components from this initial list.
v5: Added David Kinder's feedback
v4: Fixed more typos in Makefile
v3: fixed some more typos, but still holding on to feedback on how it
can be done with SPDX files, as it is not yet all clear to me.
Jira: ZEP-1079
Change-Id: Ie1bf545e26b0d304cd3ea0d70cdfc13d520197fe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This reverts commit d4d9ac2d21.
This is broken:
core:static_lib(master): sanitycheck -T .
Generating LALR tables
Cleaning output directory /home/nashif/Work/zephyr/sanity-out
Selecting default platforms per test case
Building testcase defconfigs...
1 tests selected, 28 tests discarded due to filters
total complete: 1/ 1 failed: 0
1 of 1 tests passed with 0 warnings in 0 seconds
Traceback (most recent call last):
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1887, in <module>
main()
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1879, in main
ts.testcase_report(LAST_SANITY)
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1551, in testcase_report
rowdict["ram_size"] = goal.metrics["ram_size"]
KeyError: 'ram_size'
core:static_lib(master): find -name *elf
core:static_lib(master): make pristine
make -C mylib clean
make[1]: Entering directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:19: *** $(O) is not set. Try `make all-mylib` from hello_world. Stop.
make[1]: Leaving directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:37: recipe for target 'pristine' failed
make: *** [pristine] Error 2
Change-Id: I61700b0df34790aef94a6700c7c7e0605343787f
Signed-off-by: axy <anas.nashif@intel.com>
Debug setting is using another mdef file that was no changed by
commit 5b1b2d6123
Change-Id: I406b45e37a112352c88629cf7d494c70784930aa
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
the issue is caused by lacking $(ARCH) in Makefile.inc, which
cause $(ZEPHYR_BASE)/boards/$(ARCH)/$(BOARD)/Makefile.board fail
to include. So just add ARCH variable by extract it from boards/
folder.
Issue: ZEP-1255
Change-Id: I15453c5e2bced8fc64b545b925086fe5c3bf68c5
Signed-off-by: jing wang <jing.j.wang@intel.com>
There was no check to see if the current context was running an ISR when
taking a decision whether to do a context switch or not.
Change-Id: Ib9c426de8c0893b3d9383290bb59f6e0e41e9f52
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick.
Change-Id: Iafe045ccc5dbbbd4063f836cc63057b4b06f7727
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
These changes act upon outstanding review comments when
commit 90f6ae1532 ("build: Support for integrating third party
build systems") was merged.
See https://gerrit.zephyrproject.org/r/#/c/4915/ for the comments.
Change-Id: I6b7287355f40658e47b94a8a7854776c173a7796
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Useful for finding out if the current thread is protected against
preemption when using non-preemption to protect data structures.
Change-Id: Ib545a3609af3646ba49eeeb5a2c50dc51af010d4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Oversight. These functions are used extensively in the kernel guts, but
are also supposed to be an API.
k_sched_lock used to be implemented as a static inline. However, until
the header files are cleaned-up, and everything, including applications
get access to the kernel internal data structures, it must be
implemented as a function. To reduce the cost to the internals of the
kernel, the new internal _sched_lock() contains the same implemetation,
but is inlined.
Change-Id: If2f61d7714f87d81ddbeed69fedd111b8ce01376
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change the included kernel header file from nanokernel.h to
kernel.h
Change-Id: Ie58174524880ec933191ee1fd46e6c1ba4cd0cc9
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Change the included kernel header file from nanokernel.h
to kernel.h
Change-Id: I754b883d1769517e908e88096e7704666ec12275
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Otherwise, local settings in the account will cause headache and
randomly alter the result of the testcase.
Change-Id: I758966a7fe9335a13ce237aea7d6df2ddc5733ce
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
An application-supplied main() routine is now considered to be
essential to system operation. Thus, if main() experiences an
error that aborts the main thread a fatal system error is raised.
Note: If main() completes its work and does a standard return-
to-caller the main thread terminates normally.
Change-Id: Icc9499f13578299244a856a246ad2a7d34a72f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
A thread defined via a legacy MDEF that belongs to the FPU or
SSE task group must set the thread option bits for FP or SSE
register use prior to being spawned.
If this is not done, and the kernel is configured for SSE support,
the kernel will auto-enable the thread's use of floating point
so that the thread saves SSE register context info even if it
belongs to just the FPU task group, which could cause the thread
to overflow its stack.
Note that this change only increases footprint for x86-based
applications that enable floating point register sharing.
Change-Id: Idfe4d20bcd7bc42b4cee6ac40ad7987e2a45ccf6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This routine is non-existent. (Fix for ZEP-1240)
Change-Id: I85a538037aac000207f5f01414fb53810691d349
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This reverts commit 0c9152d42d.
This was not ready for merge yet.
Change-Id: I08f69e27929867606bc58cdeffed6540725069a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from the Linux
kernel.
Change-Id: I6314dd41eb200c87cdcc6f212f13d3351128de0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With this commit we provide header and HAL/LL files for all STM32F3
SoCs (V1.6.0).
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK.
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef3.html
Purpose: Introduction of STM32F3xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F3xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F3xx, contains stm32f3xx
socs header files
Change-Id: I542bec71130bcfc7b720c546b5671e4af4baf2e3
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
Change the included kernel header file from nanokernel.h
to kernel.h
Change-Id: I76cc952316430d618ea3ecb526d9bc2a99f04cef
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Reorganize the code tree so no forward declarations are needed
(basically, move main() to the bottom).
Retag as not build only so it can be run on Quark*
Convert to actually verify counter readouts are increasing /
decreasing over busy empty loops and the alarm is being called.
Change-Id: I746efe595b8d1ac4471dccc2e87f8b36f5cc8ebe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The header uses struct device * plus stdint types.
Change-Id: Id4b817682afa4cc229f98a289adf6646d26d18bc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Does a general cleanup including:
* adding descriptions for APIs that are missing them
* adding information that would be helpful to users
and removing information that wouldn't be helpful
* correcting errors
* aligning the terminology with the terminology used
in the Kernel Primer document
* standardizing the way information is presented
Change-Id: I536644a7dc60b62100e379a199a645344430beb7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
