After QMSI 1.3.1 release, qm_dma is no longer a hard dependency for
qm_i2c. Fix our build system to reflect that change.
Change-Id: I3646bc519721a5aa18e8db5d2497d7a2550241ca
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Update to QMSI 1.3.1 release.
The only build fix needed was due to the split of the I2C ISR on
qm_isr.h .
Change-Id: Ide7a1537572c72981ec3283dc5cf0d543d9ac7d1
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
The uart_k20 serial driver incorrectly assumed that all instances of the
UART peripheral are driven by the system clock, when actually some
instances are driven by the bus clock (which usually runs at half the
system clock). This caused incorrect baud rate calculations for UART
instances driven by the bus clock (UART2-4).
Change-Id: I38041781cdee146912bb5167e7c71d6416b966b5
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
These pins are routed to the arduino header, and configuring them for
UART signals allows us to use the frdm_k64f with a frdm_kw40z shield
board for bluetooth.
Change-Id: Ie30916409844b1dc1c6e1280d5a755a6dc42e418
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Change the default Bluetooth UART device name to the UART connected to
the arduino header. This allows using the frdm_k64f with a frdm_kw40z
shield board.
Change-Id: Id22950f0a48a7c95bcddc6f1ec044f7a37cb9b72
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Change the default Bluetooth UART device name to the UART connected to
the on-board kw40.
Change-Id: I2ae981bce31a58aed4dc6d3c378fc6f6a0bec76f
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This change is required to support unified kernel.
Change-Id: I47bd644239eb3e624c7a5cb456eedad5aca79e8e
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Provide more detailed information about the controller address and
version upon init when debug is enabled.
Change-Id: I5fe9c7c91f95928cb3cc64b801137bb1466e4115
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During implementation of alternate encryption procedure
usable in nRF51, commited in
c41d3edda8, re-encryption
procedure was broken. This commit fixes the issue, and
now re-encryption should work on both nRF51 and nRF52.
Change-id: Ia41200f42b1d46e1f3f35ff44b582d4ffcc5f4fa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
So that application could check data pointer to see if any
data have been received and if read operation is complete.
Change-Id: I36c3ff81baefbc535374d937e5297938445eafa6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes use of the same code used by LE to print the state transitions.
Change-Id: I90a04f3c3f426fde1e0987acb572f7371c483c1c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a common function to log state transitions including the caller
function and line in case something goes wrong:
[bt] [DBG] bt_l2cap_chan_disconnect: (0x0011b14c) chan 0x001199c0 scid 0x0040 dcid 0x0040
[bt] [DBG] bt_l2cap_chan_set_state_debug: (0x0011b14c) chan 0x001199c0 psm 0x0080 connect -> disconnect
[bt] [WRN] bt_l2cap_chan_set_state_debug: bt_l2cap_chan_disconnect()1562: invalid transition
Change-Id: I246a9004a04d93a38b8c7f7633705f6c191698b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel state shall be updated properly otherwise it may cause unexpected
errors.
Change-Id: Ifd54d6bd3c5b44a40c315fd8a2946b30168aa65f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This defines and clarifies PF bit macro for both UIH and
non UIH packets.
Change-Id: Ide7736c0fc8607708824766adbfccf1bd7bc48e9
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Security will be elevated based on the DLC required level
during connection.
Change-Id: I0b63885582f34a5689f7bc8081c1f9f011b2325f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Initialize the variable to zero before computing.
Change-Id: Iccdf77a085667728dbb68779f001c8d940a7a89d
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is necessary in order to properly handle security errors which are
part of the testing specification thus can influence qualification.
Change-Id: If444e753be9196f3d5bb36cea00e332a33aa249f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
Change-Id: I52f882b7be9180f29def59c8ac3ef0a4798b719d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
This also moves setting initiator flag while allocating, than
doing it when SABM is received.
Change-Id: I8e811c995bf0eaa0bd24715e2e96d8a578a79c5d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Move controller code from drivers/controller to
subsys/bluetooth/controller.
Change-Id: I73f675188485aa3267507bad7647796e593a3da0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sysgen will also now re-run if the build system detects that
the script itself has changed.
Change-Id: I2bf5c4893da088fa27729bc6337bc66cc4cee341
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test tests/kernel/test_xip does not fit FLASH region of new platform
cc3200_launchxl that was added by commit 10ea5d0, hence it must be
excluded from such test so daily sanitycheck script completes
successfully.
Jira: ZEP-1201
Change-Id: I01ec2b9af45e34934d91922bd749a83f305746b1
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The unified kernel expect the default return value from a _Swap() call
to be set to -EAGAIN by the architecture code. Cortex-M3/M4 does this in
the SVC call handler, and it was missing from the Cortex-M0/M0+ before
pending PendSV.
Change-Id: I3316901186ab409f49043eb4f1972c4b0dd9a4a2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The pinmux configuration is done during board initialization.
This was validated using the following Zephyr apps:
- samples/hello_world
- samples/philosophers
- samples/drivers/uart
- samples/shell
UARTA0 is currently supported.
Change-Id: I85727c622d4d42183cc9f2f8b43d653e245dd17e
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Leverages the pinmux.c file generated by the TI PinMux utility
to enable UART pins. The pinmux configuration is used in lieu of a Zephyr
pinmux driver, and is called during board initialization.
UARTA0 is currently supported.
Jira: ZEP-1109
Change-Id: Iddb01f79043af034886859b608b7b6aadf844e53
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The shell is not a kernel feature, it is more of a subsystem.
Change-Id: Iaba60b2086ddfe77af427d70b8fc8d06a8bebe14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
