Implementation of ll_df_set_cl_cte_tx_params was updated to verify
if the number of requested CTE in a periodic advertising chain is less
or equal to maximum supported value that is provided by CONFIG_BT_CTLR-
_DF_PER_ADV_CTE_NUM_MAX Kconfig option. In the past the value was
verified against maximum value allowed by BT Core Spec Vol 4, Part E,
section 7.8.80. Check against BT Core spec provided value could lead to
memory overwrite.
The unit tests start to fail because default value of the CONFIG_BT_-
CTLR_DF_PER_ADV_CTE_NUM_MAX is 1, hence is shall be changed in unit test
configuration file.
The commit adds missing configuration.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Wrong feature was enabled for a connection object as one the currently
used features. The enabled feature was CTE response. In case if the
feature exchange has not happened, it is verified if CTE request feature
is enabled, not the CTE response feature. The problem is in a common
code that prepares connection object for unit tests.
The commit fixes enabled features preparation for a connection object.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove unused WS2812_GPIO_CLK macro that references DT_LABEL. The
WS2812_GPIO_CLK macro isn't used anywhere so remove it since we
want to minimal DT_LABEL references in drivers.
Signed-off-by: Kumar Gala <galak@kernel.org>
This adds checks to avoid setting context that is not indicated as
supported to be available.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added macro for getting nth element from section.
Added macro for counting elements in the section.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Return ret error code instead of always returning zero causing
warnings:
...
subsys/net/lib/dns/resolve.c:975:6: warning: variable 'ret' set but
not used [-Wunused-but-set-variable]
int ret = 0;
^
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compilation warnings:
...
subsys/net/lib/dns/dns_pack.c:548:6: warning: variable
'remaining_size' set but not used [-Wunused-but-set-variable]
int remaining_size;
^
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added bus locking mechanism, this patch resolves deadlocks
for more than one device on i2c bus, it is based on i2c_sam0 code.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
This patch adds driver for the Microchip Polarfire SOC MSS QSPI
controller.
The interrupts of the MSS QSPI are routed through PLIC(Platform level
interrupt controller).
Tested with generic spi-nor flash driver(spi_flash) with both Fixed
flash configuration and Read flash parameters at runtime(using SFDP).
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
The MT25QL256 part is connected via the RPI connector using Fabric IOs
on the Polarfire SOC Icicle Kit.
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
- The MX25UM51345G flash is connected to FLEXSPI PortA for
mimxrt595_evk.
- Updated flexspi_mx25um51345g driver to support DTR OPI mode.
- Tested with tests/drivers/flash.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
Add watchdog support to the mimxrt595 platform.
The mimxrt595 platform is excluded from the watchdog
test case because the test case uses variables in the
noinit section that need to be retained through a reset
but the rt595 does not retain this memory through a
reset.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
Enable access to the HS_SPI pins(JP26) on the mimxrt595_evk board.
Using DMA mode, tested with spi_loopback testcase.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
Enable I2C access to FXOS7000 sensor on the mixrt595_evk board
Tested using samples/sensor/fxos8700 for mimxrt595_evk_cm33.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
This PR introduces a fix for DRX window being triggered to early during
CSL. Fixes were also introduced in the nrf 802154 radio
driver, so removed the unneeded DRX_ADJUST constant.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
It is a general recommendation to use lowercase characters and dashes
in property names instead of uppercase and underscores. Make this a
formal rule for upstream Zephyr bindings.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
As the type of A(n) is integer, and A3 and A5 are close to
each other. Sometimes A3 is equal to A5. So change the ">" to
">="
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
Select HAS_MCUX_ADC_ETC Kconfig symbol for MIMXRT1062,
since the ADC External Trigger Control eripheral is present
on this SOC.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
The img_mgmt_upload was getting into loop with requesting
offset 0 from mcumgr, when requested to re-try upload after
write fails.
Because it is not really possible to recover from write fail,
at least currently, the commit changes code to reset upload
state in a case of write error and return an error code.
Now, when write fails, an error will be returned and upload
process will be stopped and reset; upload re-try will behave
as a new upload has been requested.
Fixes#44219
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The offset is checked, for correctness, before the function
img_mgmt_impl_write_image_data is called, so it is redundant to
do the same check within it.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
arch_mem_map() on ARM64 is currently not supporting the K_MEM_PERM_USER
parameter so we cannot allocate userspace accessible memory using the
memory helpers. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The tests is currently testing all the memory mapping parameters but
K_MEM_PERM_USER. Add a test case to test that as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
WWDG1 doesn't work on STM32H7 because its peripheral clock
is never enabled due to wrong enable bit in RCC_APB3ENR
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Makes it possible for an application to
handle CSIS RSI advertising by registering a
callback, which will disable the internal
CSIS advertising.
Also fixes registering callbacks in CSIS.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
All the gpio drivers are based on devicetree and thus we always set
HAS_DTS_GPIO, thus we don't need this Kconfig option anymore. Remove
uses as its safe to assume DTS is supported for GPIO.
Signed-off-by: Kumar Gala <galak@kernel.org>
We should avoid use of the label property in devicetrees. The
'zephyr,sdmmc-disk' compatible node has a 'label' property set
but there isn't any code utilizing this so removing the property
from any devicetrees that have it set (as well as example in docs).
Signed-off-by: Kumar Gala <galak@kernel.org>
add_missing_case_status is more appropriate for this function.
We are adding missing status, not cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a filter type to distinguish between testsuite filters that are
maintained in the testcase.yaml file and those provided on the command
line.
The issue was that when something is excluded deliberately on the command
line twister would report an error if that filter would filter out an
integration platform. We do not want that, because the filtering is
being done by the caller knowing that some tests would be not run, even
if those are integration platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test only runs on one platform, so make sure we do not exclude the
only platform using some other hardware related filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the pull request assigner workflow to skip the
reviewers, assignee and labels assignment for the pull requests that
are marked as draft.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The venv package is not installed by default on Ubuntu, however, it is
required to follow the virtual environment installation path.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some tests can cause serial leftover logs buffered on board.
A simple ser.flush() is not enough. So add explicit readline()
to drain such logs which prepares a clean serial context for
the case that follows.
Signed-off-by: Ming Shao <ming.shao@intel.com>
