Move to using NET_DEVICE_DT_DEFINE_INSTANCE instead of
NET_DEVICE_INIT_INSTANCE as the driver is devicetree based and it
lets us remove DT_LABEL usage in the driver itself.
Signed-off-by: Kumar Gala <galak@kernel.org>
When the SYS_CLOCK_EXISTS Kconfig option is not enabled, k_busy_wait()
has no implementation, so in such case, call nrfx_coredep_delay_us()
directly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The measurement time in normal mode was too short.
With this commit the maximum value of the datasheet is applied.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The driver supported getting register shift from Devicetree, from a
custom definition in SoC headers (fragile) or, it took a default value.
This change simplifies things by making reg-shift property required in
all instances.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ns16550 flags reg-shift property as optional. In case it is not
supplied, the ns16550 driver relies on a value defined in <soc.h>, or,
by default it takes 4 (shift by 2).
This patch adds the property to all ns16550 nodes, with the following
values:
- 2 if SoC did not have any custom value defined by
UART_REG_ADDR_INTERVAL (corresponds to 1 << 2 = 4)
- If SoC defined DEFAULT_REG_INTERVAL (snps_arc_iot/it8xxx2), use such
value (4=2, 2=1, 1=0).
These changes will allow simplifying the ns16550 driver.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove uncrustify configuration file in favor of using clang-format, a
tool that is nowadays more popular/powerful for code formatting.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Prefer clang-format over uncrustify for source code formatting.
uncrustify configuration files will be removed in future commits.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The amount of options available on clang-format has become quite
extensive over-time, making a dumped file difficult to read or maintain.
In this patch the .clang-format has been re-written by inheriting from
LLVM (default) since most of the options can be re-used to match the
Zephyr/Linux coding style conventions.
Note: The 14 release has interesting options for Zephyr, in
particular, these new settings would be beneficial:
IfMacros:
- CHECKIF
SpaceBeforeParens: Custom
SpaceBeforeParensOptions:
AfterForeachMacros: true
AfterIfMacros: true
.clang-format should be periodically updated as new clang-format
releases reach Linux distros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update the list of for each macros using the suggested command in the
configuration file.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For devices with more than one CAN peripherals, CAN1 is the master and
its clock has to be enabled also if only CAN2 is used.
Signed-off-by: Martin Jäger <martin@libre.solar>
When supporting chain PDUs, after HCI reset the first PDU
allocated did not initialize its next pointer causing use
of unallocated PDUs for chaining while a duplicate of such
PDU buffer being allocated for other states/roles. This
causes in certain cases both Extended and Periodic PDUs
having same data, the Extended Advertising PDU being
transmitted at the instant of the Periodic Advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Log_list module is used by the logging v1. Removing
the suite as part of logging v1 removal.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use Zephyr coding style for variable names and functions where possible.
The function BoardGetUniqueId has to be kept as is to match LoRaMAC
library declarations.
Signed-off-by: Martin Jäger <martin@libre.solar>
Before mbedTLS 3.0 there was just SHA512 option, which enabled both SHA384
and SHA512 support. mbedTLS 3.0 introduced SHA384 specific option, which
means that SHA384 got unsupported after merging
commit 4e6cfb67f9 ("modules: mbedTLS: Bump mbedTLS to 3.0").
Introduce SHA384 Kconfig options, so that support for it can be selected in
project configuration if needed. Since SHA384 still depends on SHA512 to be
selected, add such dependency in Kconfig.
Select SHA384 support in non-generic (not configured by Kconfig) mbedTLS
config headers, so that previous (before mbedTLS 3.0 was merged) behavior
is regained.
Fixes: 4e6cfb67f9 ("modules: mbedTLS: Bump mbedTLS to 3.0")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Increase threads stack sizes from 2k to 3k, so that it will pass without
stack overflow on qemu_x86 platform when SHA384 support will be reenabled.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Previously, twister would exit with a 0 status code if there were build
failures but no execution failures. This makes it easier to catch
build breakages when using twister in CI workflows.
Signed-off-by: Benjamin Gwin <bgwin@google.com>
The CMake function `find_package()` supports the flag QUIET.
QUIET will disable informational printing within CMakes own
find_package function.
To align with CMakes find_package, this commit will honor the QUIET flag
and disable informational printing related to package lookup.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
