CMake provides a DEPRECATION level for messages.
This should be used instead of WARNING for deprecated features.
Using DEPRECATION allows users to disable the deprecation warning with
`cmake -Wno-deprecated ...`
or turn deprecation warning into an error using
`cmake -Werror=deprecated`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
MISRA C:2012 Rule 7.2 (A `u' or `U' suffix shall be applied to all
integer constants that are represented in an unsigned type)
Added missing `U' suffixes in constants that are involved in the
analyzed build, plus a few more not to introduce inconsistencies
with respect to nearby constants that are either unused in the
build (but implicitly unsigned) or are used and are immediately
converted to unsigned.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
This reverts commit 209e4ee1a1
which had broken the "spi_gen utility find" functionality.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
As per the decision to rename this meeting and make it into a working
group, document this in the official docs.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix BT_CTLR_RX_ENQUEUE_HOLD implementation that stalled
generating the CONN_UPDATE and PHY_UPDATE when there were
no Rx data or Tx acknowledgements to be processed when
the controller was built with BT_CTLR_LOW_LAT_ULL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The 32.768 kHz crystal shown on the Holyiot YJ-16019 schematics is not
mounted. Enable the LRRC RC oscillator instead.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fixup how the drv_name field is set in NET_DEVICE_DT_OFFLOAD_DEFINE
and NET_DEVICE_DT_DEFINE_INSTANCE to be consistent with
NET_DEVICE_DT_DEFINE.
Signed-off-by: Kumar Gala <galak@kernel.org>
...v1.1 overlay
Shows the dependencies which makes it easier to enable the content
format when necessary
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
...format to bootstrap registration message with LwM2M v1.1.
SenML CBOR takes precedence, followed by SenML JSON and OMA TLV.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Write to an opaque resource failed and it has been fixed. Support for
blockwise transfer is still missing.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
The current implementation for events channel is using an empty
callback for every unbind channel and the interrupt is clearing
every event and calling the callback.
However in a scenario where a domain fires a notification when
another has not yet bind the channel, the event will be missed.
To address this limitation, this commit is keeping track of
missed event channel notification when the empty callback is
used, a function to retrieve and clear the missed event is
introduced.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
This commit extends Nordic's ieee802154 driver with the possibility to
set Tx power for every transmission separately.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit aligns openthread radio platform to use `ieee802154_txpwr`
of the packet to transmit instead of setting power through a separate
API call, if possible.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit extends the `struct net_pkt` structure with
`ieee802154_txpwr` field that contains signed value of the desired
transmission power of a IEEE 802.15.4 frame in dBm.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Remove intel_s1000_crb pinmux driver. The board is no longer available
or supported in the zephyr tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove runners specific to the intel_s1000_crb board. it is no longer
available or supported in the zephyr tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a simple function to get the thread pointer to the user
mode thread of the user work queue. This is useful for granting
that user mode thread additional access to kernel objects.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adding myself as collaborator for both logging and cbprintf so that
I get notifications when PRs are submitted against them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit relaxes the precision requirements for idle event statistic
test when RISC-V machine timer driver is used. This is needed for some
platforms (e.g. hifive1), for which the cycle count is too low to pass
the checks where a percent deviation of peak cycles count is allowed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
When defined as 'char', the compiler notices that the memcpy targeting that
address will write more than one byte which generates a warning. Use an
array instead so that the compiler doesn't assume a specific size.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the compiler is allowed to know the semantics of malloc and free,
this test needs to be careful to not have both calls elided by not using
the result at all. Simply storing the malloc pointer in a global
variable is sufficient here.
Signed-off-by: Keith Packard <keithp@keithp.com>
Subtracting with a uint64_t operand yields a uint64_t result, for which
the absolute value is not terribly interesting. Cast the operand to
int64_t.
Use llabs instead of abs as abs takes an int parameter and not an
int64_t. This appears to work even with the minimal C library.
Signed-off-by: Keith Packard <keithp@keithp.com>
idle_rate is uint8_t, sof_cnt is uint32_t. The result is uint32_t, which
is the wrong type for 'abs'. Explicitly cast idle_rate to uint32_t,
subtract sof_cnt and then explicitly cast to int32_t and then use abs,
storing the result in another int32_t which matches the return type for
abs.
This quiets clang warnings about passing unsigned values to abs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Not sure why this is needed for this branch, but it pretty clearly is --
there are hundreds of set-but-unused variables in the codebase.
Signed-off-by: Keith Packard <keithp@keithp.com>
Sensor value computation was creating a 64-bit integer value, passing
that to 'abs' and assigning that to an int32_t result and then sanity
checking the result. If the computation goes badly wrong, then the range
reduction of 64-bit to 32-bit values could generate a falsely in-range
value.
Instead, perform the computation in 64-bits, range check that value and
then assign to a 32-bit variable.
Signed-off-by: Keith Packard <keithp@keithp.com>
This driver carefully saved the errno value from the failing call and
then didn't use it in the ERROR report, using the potentially invalid
current errno value (which may have been set by the close call).
Signed-off-by: Keith Packard <keithp@keithp.com>
Clean up the docstrings for the APIs related to converting property
values to tokens. I think the current language has a few issues and
could be made clearer in some cases.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to qemu_x86_tiny having very small defined SRAM area,
enabling userspace results in not having enough free physical
pages to run the tests. So make the memory a bit larger so
we can actually test memory mapping with userspace.
Fixes#46398
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The testcase.yaml file in tests/bluetooth/df directory makes
twister trying to build tests that are not available.
All tests in the df subdirectory have private testcase.yaml
files.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
