Add initial skeleton for doing settings-based persistent storage for
the mesh network state. This patch only includes restoring some core
network state such as IV Index, Sequence number, Net Keys, App Keys
and the Replay Protection list. The remaining state, and actually
storing the state, is left for follow-up patches.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The sequence number is incremented from several different places in
the stack. The way it was done was potentially race condition prone,
and was also problematic from the perspective of updating the
sequence number in persistent storage. Create a dedicated helper for
incrementing the sequence number (solves the race) which can in later
patches be used to add the persistent storage support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This for loop runs inside an "if (!sub)" branch, so explicitly setting
sub to NULL in the loop is redundant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These app key and net key (subnet) helpers will soon be needed to be
called from the persistent storage code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Header was missing after merging PR #6970
`Add support for File System multiple instances`
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Group tests under 'Zephyr Tests' and only document the actual tests.
Create cross references to APIs being tested where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a board-level config option to select whether the code gets linked
into internal instruction tightly coupled memory (ITCM), external
hyperflash, or external qspi flash. The default is ITCM.
Note that we are not yet building an image vector table (IVT) into the
image, therefore the zephyr binary is not bootable by the SoC ROM as-is.
However, the DAPLink firmware prepends an IVT to the image when you use
its drag-and-drop feature to program flash, and this results in a
bootable zephyr application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flexspi and semc memory controllers to the i.MX RT SoC. Adds
hyperflash, qspi, and sdram external memories to the mimxrt1050_evk
board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds 8 MB and 64 MB flash size options, which correspond to the two
external flashes (qspi flash and hyperflash) on the mimxrt1050_evk
board. Adds a 32 MB SRAM size option, which corresponds to the external
sdram on the board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Previously, when !CONFI_XIP, BOOTLOADER_SRAM_SIZE was defaulted
to 16 (K), reducing the size of SRAM available for the program.
Also, though it has no effect, the value for SRAM start in the
dtsi file was incorrect.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The API in the current SDK version is rom-patched, and uses
prcm.c code in the driverlib directory.
But, the PRCMMCU3200Init() API call should be prefixed by MAP_
to allow the option to use the ROM API in a future TI SDK version.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add comments explaining why these three driverlib files need to be
built rather than using the ROM versions.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, a rom.h header was missing from the SDK board porting
file, resulting in some MAP_ API calls not getting vectored to ROM.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The frdm_k64f board document incorrectly listed spi signals on PTCD
pins, which don't exist. They should be on PTD pins.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The loop that checks the MPU region permissions incorrectly
iterates from (num_region + 1) to 1. This should be
(num_region - 1) to 0. This results in the wrong regions
being checked and possible overflow for any implementation
that uses the max region value of 0xFF.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is generating lots of false positives and we keep overriding them
manually, so downgrade and mark it as a warning.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set FAT FS mount point name as per ELM FAT Library drive
name format.
Add file system specific headers wherever necessary.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support for multiple instances of a file system by
making use of mount point as the disk volume name which
is used by the file system library while formatting or
mounting a disk.
Also moved out file system specific data structures from
public fs.h header and handled them in corresponding
file system interface files by introducing open files and
open directories concept which is already being used in
NFFS interface module. Now it is extended to FatFs as well.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Assign the appropriate disk name Kconfig option to the
usb mass storage sample test.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Extend storage_dev type beyond 'struct device' by changing
the variable type to void pointer. This will be needed if we
have additional transactional layers b/w filesystem and the
actual backend device.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
- Some tests start with test_, some do not, so make sure we parse both.
- Parse skipped tests
- Improve handling of test case identifier
- Handle Exceptions in device handler
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are passing global arguments from one level to the next when those
variables are available globally. Reduce the arguments and remove unused
arguments as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
init class in one place, no need to duplicate all class members in every
subclass.
run_log is not needed in the handler class.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Parse the test results and create a test report with more granular
results that can be imported to into test management/reporting system.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow us to run sanitycheck on real devices and get reporting
out of it the same way we do that with Qemu.
To use this, run sanitycheck with the following new options:
scripts/sanitycheck --device-testing --device-serial /dev/ttyACM0 -p
frdm_k64f -T tests/crypto/
--device-serial denotes the serial device the board is connected to.
This needs to be accessible by the user running sanitycheck. You can
run this on one board only at a time, the board is specified using the
--platform option.
This was tested with only a few boards, some board will not work
because how they reset the serial device during flashing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
num_entries can be as large as 255. However, based on the
_ti_adc108s102 implementation, num_entries must be less than
ADC108S102_CMD_BUFFER_SIZE or the cmd_buffer[] and
sampling_buffer[] arrays in the data struct could overflow.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Channel IDs start at 0, need to fail if the provided ID
equals ADC108S102_CHANNELS, not just larger than it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The line control value could result in a baud divisor of zero.
Check this condition and return -EINVAL if that is the case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The pinmux subsystem does not have any API documenation. Currently
none of the existing pinmux drivers do any kind of input validation
for the pin/op parameters, which has been shown to allow the caller
to access unauthorized memory, up to and including disabling the
MPU.
This requires a proper specification for the pinmux subsystem and
also modification of existingd drivers to validate arguments on a per
driver basis. Remove user mode access until #7390 is resolved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove the C Kconfig tools and various scripts associated with them.
scripts/kconfig/diffconfig is popular, so keep it.
I don't know whether anyone is using scripts/kconfig/config. Remove it
and see if anyone screams.
scripts/kconfig/streamline_config.pl deals with modules ('m' values) and
can safely be removed. Zephyr's Kconfig files do not use modules.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
They will no longer be available once the C Kconfig implementation is
removed.
oldconfig and allno/yesconfig implementations are available for
kconfiglib and could be added later if needed. savedefconfig (minimal
configuration generation) is available from the menuconfig.py
configuration interface.
cmake/usage/kconfig-usage.cmake becomes kinda pointless after this
change, so merge it into cmake/usage/usage.cmake.
Remove the kconfig_target, COMMAND_FOR_*, and COMMAND_RUNS_ON_WIN_*
CMake variables, as there's just the 'menuconfig' target now.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The new menuconfig implementation needs it when run on Windows.
Use an environment marker to only install windows-curses on Windows. See
https://www.python.org/dev/peps/pep-0508/#id23.
From some googling, sys_platform might be more widely supported than
platform_system, so use that.
Suggested-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Update the Application Development Primer to describe the new menuconfig
configuration interface:
- Update the section explaining how the configuration is navigated,
changed, and saved
- Add a section explaining how to jump directly to a symbol in the
configuration interface
- Replace mconf screenshots with menuconfig.py screenshots. Remove some
screenshots that are no longer used.
- Remove the section explaining how to load arbitrary .config files
from within the configuration interface. That feature hasn't been
implemented yet in menuconfig.py.
- Do various minor language cleanup
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Make 'make/ninja menuconfig' run menuconfig.py instead of mconf from the
C Kconfig tools. Get rid of the 'pymenuconfig' target.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Pressing [/] brings up a dialog with an edit box where a regex can be
entered. The list of matching symbols is always shown below it.
Selecting a symbol and pressing [Enter] jumps directly to it in the menu
tree. If the symbol is invisible, show-all mode is turned on
automatically.
This commit also includes a bunch of more-or-less unrelated changes from
poking around with the code:
- Some redundant styles were merged. Probably wouldn't want to have a
different style for each separator line, for example...
- [ESC] in the top menu now works like [Q]
- Returning to a parent menu now makes sure that the selected row is
visible, even if the terminal was shrunk between entering the child
menu and leaving it.
- A _max_scroll() helper was factored out to reduce code duplication.
It takes a list of items and a window in which the list is
displayed, with one row per item, and returns the minimum scroll
value that will make the final item visible.
- The save dialog now pops up a message to confirm that the save was
successful.
- Lots of minor code nits all over (renamings, etc.)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
