Also parse test documentation. When add tests to doxygen, we get
warnings about device.h macros not being defined. Exclude this now and
track this in issue #7367.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For many tests, avoid splitting into files and put eveything in main.c.
For many of the tests, use main.c as the test source file to keep things
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Calling POSIX exit() function in Zephyr w/newlib leads to printing
"exit" to stdout followed by infinite loop. That message was
printed without a newline though, leading to confusing artifacts
in the console output.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit activates the built-in stack guard on the main_thread
before jumping to it upon system initialization. Stack guard is
activated if BUILTIN_STACK_GUARD is enabled by the user. The
commit also activates built-in thread stack guards at every
context switch, if BUILTIN_STACK_GUARD enabled by the user.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Ignore stack pointer limit checking during a HardFault or NMI
exception, to allow for the Fault handling function to execute
properly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit implements the build-in interrupt stack protection
via the native MSPLIM register in ARMv8-M MCUs that support the
Main Extension. Main stack pointer overflows will cause Stack
Overflow UsageFaults. In addition, the commit introduces a new
config option, BUILTIN_STACK_GUARD, allowing the user to enable
and use the built-in stack protection in ARMv8-M firmware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable settings and increase the system workqueue size to deal with
the stack usage. This also makes it possible to test unpairing support
with the shell's 'clear' command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a bit of unnecessary space in the bt_keys struct. Re-design
some fields for a more compact format, which is particularly helpful
now that the struct gets stored as-is to flash through the settings
API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Integrate the bt_keys submodule with bt_settings. Add a new
bt_keys_store() API to write keys to flash, and extend the existing
bt_keys_clear() to remove the keys from flash.
Along with this, add some helpers for genrating settings key values
containing a bluetooth address, as well as for decoding them to get
the binary bt_addr_le_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new linker section for a list of submodule settings handlers,
and iterate the list from the various settings callbacks.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce a basic skeleton for peristent storage based on the settings
subsystem. Also enable support for this to the peripheral sample
application, so the new code gets exersized by CI. For now, the
implementation provides the same level support as the bt_storage API
ever did, i.e. for the identity address and the IRK.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is bug-fix for issue #7311
FCB: CRC write size in append_finish doesn't honor
flash min write size
This patch changes write size to the minimum supported
write size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Kconfig.py is not following the de-facto (real?) coding standards of
Zephyr. This commit refactors kconfig.py with two changes:
Use __main__ and def main().
Use argparse instead of sys.argv.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This patch adds DT description of generic storage flash
partition. This fixes issue #7227.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add system call handler support to LED subsystem. No buffers are
involved in any of the API's and hence the syscall support is
straightforward.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
FS_FLASH_MAP_STORAGE keyword enables the storage partition,
but it was depend on flash_map module which is unused by
NFFS. This patch makes it independent thanks
to it is possible to enable the storage partition
without flash_map module.
FS_FLASH_MAP_STORAGE was renamed to
CONFIG_FS_FLASH_STORAGE_PARTITION
as it is independent for flash_map.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The IEEE 802.1Q chapter I.3 contains a proper network packet
priority to traffic class mapping. The original mapping was
clearly incorrect.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In the future, when bootstrap support is added, this config won't
be used. Let's remove it.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Now that the LWM2M_OP_* bits have been renumbered, we no longer need
a custom BIT() macro for the LwM2M code. Let's remove it and use
BIT() instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove unused OP flag LWM2M_OP_NONE and renumber the existing flags
so that the operations used in object permissions land in the lowest
bits, and extended operations come later.
We may eventually add more permission / data flags, so let's try and
keep them inside a 1 byte boundary (flags with bits 0 to 7).
NOTE: LWM2M_OP_DELETE is currently not checked as a permission but
it may be in the future so it is in the lower bits.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When a data pointer or data length is not set, the read and write
handlers should return ENOENT to generate the correct LwM2M error
code (COAP_RESPONSE_CODE_NOT_FOUND).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Before ever call of string_to_path(), the lwm2m_obj_path object
was being cleared via memset. Let's move the memset into
string_to_path() to remove the duplicate code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Eliminate several similar code-blocks by replacing
engine_get_resource() with a more useful function called:
path_to_objs()
By supplying an lwm2m_obj_path object, it will find and set
the related values for:
struct lwm2m_engine_obj_inst
struct lwm2m_engine_obj_field
struct lwm2m_engine_res_inst
NOTE: NULLs can be supplied where the returned value is not
important.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The fp_sharing test has an option to control the number of iterations in
the pi calculation, which is used to adjust the duration of the test on
different platforms that may have significantly different execution
frequencies (e.g., qemu_x86 vs. frdm_k64f). The conversion to CMake did
not handle this option correctly and forced the same value for all
platforms.
The test now completes in about 5 minutes on frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Get the 1.12 release notes started with material derived from the 1.12
roadmap (closed issues) and headings from the 1.11 release notes.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add test for Altera Nios-II MSGDMA soft IP core. This IP on
Altera MAX10 support Memory to Memory DMA transfers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add dma driver for Nios-II Modular Scatter-Gather DMA soft IP.
This driver relies upon the Altera HAL msgdma driver for all
the dma core register programming and interrupt handling.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add _nios2_dcache_flush_no_writeback() routine to invalidate
cache contents of address provided.
This routine is ported from Altera Nios-II SDK v17.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add wrapper function for alt_printf() Altera HAL runtime API
to enable Altera HAL drivers on Zephyr.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add Altera Nios-II modular Scatter-Gather DMA (mSGDMA) HAL
driver to Zephyr.
The sources are taken from the Altera SDK v17.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add new test for testing IPv4 source address selection functions.
Refactor the tests:
- split tests to smaller pieces
- use proper zassert() statements
- print debugging information only when needed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
