We aren't interested in doing error handling for close(), close()
is itself on error handling path, and its purpose if to free
socket resources.
Coverity-CID: 186062
Fixes: #7713
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Security layer was tested only against CC2520, which does not mandate to
begin the session with a valid key. However, the crypto API tells it
must do so. And indeed, starting a session on mtls shim crypto device
will fail due to missing key. Thus moving the relevant code where it
should.
Reported-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some serial tools such as 'minicom' send BS when press backspace,
not DEL, so delete char using BS or DEL.
Fixes: #7959
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
This is a rare but valid case when you request the controller to send
dummy bytes on your behalf (it saves memory as you don't need to provide
a valid buffer, just NULL and the numbers of dummy bytes as length).
Without it, user code can get stuck into interrupt loop.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This symbol was renamed by commit 14e73e73c3 ("net: Make DEBUG config
option naming consistent"), but an assignment (and a commented-out
assignment) to the old name remained.
Fix the assignments to use the new name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The choice symbol LSM6DSL_EXT0_LIS2MDL was given a 'default' in
Kboards/arm/96b_argonkey/Kconfig.defconfig, but 'default' has no effect
on choice symbols, triggering a warning from Kconfiglib.
Instead of adding a default to the choice symbol, change the default of
the 'choice' itself by giving it name and adding the default in
Kconfig.defconfig.
This requires that we remove the default on the "base" definition of the
'choice', due to some messiness related to the Zephyr-specific
prefer-later-defaults behavior (see the 'Zephyr-specific Kconfig
behavior for defaults' section in the Board Porting Guide). Choices were
overlooked when that patch was added to the C tools, meaning choices
still prefer earlier defaults. The crux is that Kconfig.defconfig files
are included last.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fills in the boards, drivers, build, and hals subsections with major
additions and changes in the 1.12 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
CAVS_ICTL_0_IRQ_PRI to CAVS_ICTL_3_IRQ_PRI and DW_ICTL_IRQ_PRI
are now defined in Kconfig. This addresses the issue #7811.
This was not throwing up any compilation error earlier as the IRQ
priorities are all hardwired in Xtensa and hence are unconfigurable.
They are dummy for Xtensa arch but may be applicable if used in some
other arch.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This symbol was removed in commit 748f724d82 ("serial: dts: remove
!HAS_DTS related Kconfig"). The setting should come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In some STM32 series, SPI LL headers where included under
CONFIG_CLOCK_CONTROL_STM32_CUBE flag definition.
Fix this and use CONFIG_SPI_STM32 instead.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
"clocks" property is defined in st,stm32-u(s)art.yaml
files while aslo defined in uart.yaml.
Remove redundant information.
Fixes#7974
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
These symbols were removed in commit 311e6b9e3e ("arch: arc: Use DTS
for all ARC SoCs"). The settings should come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are no longer needed since commit 4dc9e5b2de ("kconfig: Get rid
of 'option env' bounce symbols"). The C tools are likely to get rid of
them soon too.
The APPLICATION_BASE symbol (option env="PROJECT_BASE") triggered a
compatibility warning, because 'option env' symbols now need to have the
same name as the environment variables they reference to be compatible
with Kconfiglib. APPLICATION_BASE is unused, so just remove it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This one converts "raw" timeout value to use K_MSEC() macro
in order to make clear how long the timeout is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use of K_SECONDS() macro is more intuitive so use that instead of
plain MSEC_PER_SEC define.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These symbols were removed in commit ed26b95746 ("drivers/gpio:
Removing dts generated options in QMSI Kconfig").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Commit 93d3a42776 changed the interface
of extract_controller() but did not change the recursive call within.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
- Pressing 'c' ('n' was taken) toggles a mode where the names of all
symbols are shown before their prompts. This saves going into the
help display when you just want the name.
- The name of the symbol/choice now appears in the main text of the
help dialog rather than in the title, where it might be hard to
spot, as pointed out by Carles Cufi.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This cmake macro was changing the control flow of the cmake files.
It is not advisable to modify the callee control flow from inside
a cmake macro.
Hence removing all instances of this macro from the build system.
Fixes: GH-7565
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Fixed the incorrect usage of CONFIG_FLASH in the defconfig.
This CONFIG_FLASH is used to enable the flash driver only.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Fixed the incorrect usage of CONFIG_FLASH in the defconfig.
This CONFIG_FLASH is used to enable the flash driver only.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Fixed the incorrect usage of CONFIG_FLASH in the defconfig.
This CONFIG_FLASH is used to enable the flash driver only.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Previously the directory core/cortex/mpu/ was getting included
on a hidden kconfig. Now this has been replaced with the Kconfig
CONFIG_ARM_CORE_MPU.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Previously the directory core/mpu/ was getting included on a hidden
kconfig. Now this has been replaced with the Kconfig
CONFIG_ARC_CORE_MPU.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch prevents eem_read_cb from trying to allocate a lot of memory.
It may happen that EEM payload size is zero, the eem_read_cb then tries
to allocate a buffer which is 0xfffc bytes large and luckily blocks.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
DNS_RESOLVER_MAX_SERVERS has the range [1,NET_MAX_CONTEXTS], with
NET_MAX_CONTEXTS being set to 4, but is set to 5. Out-of-range .config
values are ignored, so the symbol reverts to its default value (1).
Increase NET_MAX_CONTEXTS to 5. DNS_SERVER{1-5} being set probably
implies that DNS_RESOLVER_MAX_SERVERS shouldn't be decreased to 4.
This fixes two Kconfig warnings (out-of-range + didn't get assigned
value).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enable the instruction cache by default in order to achieve a speedup of
up to 20% in code execution.
Cache can be disabled by setting the new NRF_ENABLE_ICACHE Kconfig
option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Gets rid of a warning added in commit 6eabea3a7e ("Kconfiglib: Warn
for unquoted string defaults"), which will soon be an error (because a
simple warning whitelist will be used).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All the STM32L4 SoCs have a Cortex-M4F CPU, and thus have a FPU. Update
stm32l4/Kconfig.series to select CPU_HAS_FPU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the current form of the code, the slave frame shifting leaves the TX
full and will shift out some unwanted bytes out on the next transaction.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The test was using ztest incorrectly exposing everything as one single
test function. We now have multiple tests that can be tracked back to
features and requirements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
