Added support for 8 MB MPU regions for SRAM sizes between 4 and 8 MB,
and 16 MB MPU regions for SRAM sizes between 8 and 16 MB.
Signed-off-by: Johan Öhman <johan.ohman@softube.com>
Customize busy wait timer for micro-seconds accuracy.
Verified by follow test pattern:
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_api
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_error_case
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_monotonic
west build -p auto -b it8xxx2_evb tests/kernel/timer/starve
west build -p auto -b it8xxx2_evb tests/kernel/context
west build -p auto -b it8xxx2_evb tests/drivers/adc/adc_api
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
SMP support might not work if esp_mp.c initialization code
is placed in ROM area. This fix that scenario.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Only cAVS15 is different in terms of definitions, so the ifdef logic can
be simplified quite a bit. Also reorder some of the definitions to
improve readability. No functional change.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Enabled the Shared Memory Reset feature for nRF5340 Application Core
when the RPMsg backend for IPC Service is enabled.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Based on introduction of plain GPIO configurations in STM32 pinctrl
bindings, update STM32 pinctrl/gpio drivers to make this functionality
available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some pinctrl related definitions are still defined
in pinmux related files.
Duplicate definitions to prepare pinmux removal.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
All iMX RT 1xxx boards are now expected to use pin control, so the USDHC
pinmuxing callbacks can be removed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable soc ethernet ref clock output at the SOC level instead of board
level, since it is required for all iMX.RT SOCs
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT11xx series has similar pin configuration peripheral to RT10xx, with
some differences in register layout. Create new pinctrl definition
header file, and reuse existing driver code for RT10xx.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
iMX.RT parts use a GPR register for some pinmux settings. Update pinctrl
driver to support this GPR register definition.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
OCRAM can be used for DMA, and in this case it should be marked as
noncacheable. Add KConfig symbol and appropriate linker scripts to
enable OCRAM region to be defined as noncacheable, and initialized with
data from flash at boot.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This update current Atmel sam0 pinctrl initiative to current Zephyr
pinctrl API. It update current devicetree bindings and add the sam0
pinctrl driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update current Atmel sam pinctrl initiative to current Zephyr
pinctrl API. It update current devicetree bindings and add the sam
pinctrl driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit fixes the default value of SYS_CLOCK_HW_CYCLES_PER_SEC
option. The previous value of 32768 is not consistent with the
documentation of FE310 SoC. Only FE310-based boards rely on the default
value of this option; other boards from the Freedom series define it
themselves.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit makes the transition from the pinmux driver to the pinctrl
driver. It also modifies UART, SPI and I2C drivers used in FE310-based
boards to use the new pinctrl API.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
In npcx adc driver, we select 'Scan' (Multiple Channels Operation Mode)
mode by default. It means that selected channels in ADCCS will be
converted automatically. Then, read the measured data from CHNDAT
registers if EOCCEV (Event is set after all selected channels are
converted.) flag in ADCSTS is set.
But we enable the wrong interrupt type, INTECEN, during adc
initialization. Ec will send the interrupt after each channel in ADCCS
is converted. It has no harm to the current driver since the driver
reads all selected channels and turns off ADC converter only after
EOCCEV is set in ISR. But it does generate spurious interrupts.
This CL enables the correct interrupt type, INTECCEN, during adc
initialization. Ec only sends the interrupt after all of channels in
ADCCS are converted.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This is required to include the resource table in the build output. The
Linux remoteproc framework explicitly looks for this section while loading
the elf and may complain if the resource table is missing.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Aspeed ast10x0 series SoCs contain a ARM Cortex-M4F processor. This
processor operates at 200MHz and executes on SRAM.
This patch adds support for ast1030 as the first SoC of this series
which is targeted but not limited at the bridge IC in a server system.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I668af1ff8a36a05da791c3329ae08f5ae712bdd4
KW24 and KW22 series support open drain pins, while rest of kinetis KW
SOCs do not. Don't redefine PORT_PCR_ODE for these SOCs
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Extend the macro with checks for DT properties related to pin
assignments that are defined but would be ignored, depending on
whether PINCTRL is enabled or not, what presumably indicates
a resulting configuration different from what the user expects.
Add also a possibility to indicate that the pinctrl-1 property
should not be checked because the caller does not support the
sleep state.
Rename the macro so that its name better reflects its function.
Update accordingly all drivers that use it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add Kconfig items that can be used to query if the current SoC
support the HW peripheral CTRLAP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
As mentioned in #42882, the I2C of IT8XXX2 is designed for two different
IP blocks, so this PR divides this I2C driver into two compatibles.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Using IRQ as source for interrupt values can
fail when installing irq_connect_dynamic, as
IRQ can previously be enabled. This updates
the logic to use source map and allows
default irq_enable() and irq_disable() to call
esp32c3 interrupt allocator implementation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Enable support for mtvec vectored mode for privilege SOCs. This
is an optional feature and takes up addtional code space. It is
necessary to support this feature for privilege SOCs that only
support mtvec vectored mode.
Change was tested on qemu_riscv32 and qemu_riscv64 boards with
CONFIG_RISCV_MTVEC_VECTORED_MODE enabled.
Signed-off-by: William Patty <wpatty24@gmail.com>
The SOF ipc4 driver and Windows driver can't work with
SOF built with zephyr and ipc4 configuration on cAVS 1.8+
platforms. Because the UUIDs of BRNGUP and BASEFW are
copied from APL (cAVS 1.5), which is incompatible with
cAVS 1.8+ platforms.
This patch updates BRNGUP and BASEFW to use cAVS 1.8+ UUIDs.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
The pm_constraint_* APIs were effectively used by the policy manager
only. This patch renames the API to the policy namespace and makes its
naming more explicit:
- pm_constraint_set -> pm_policy_state_lock_get()
- pm_constraint_release -> pm_policy_state_lock_put()
- pm_constraint_get -> pm_policy_state_lock_is_active()
The reason for these changes is that constraints can be of many types:
allow/disallow states, impose latency requirements, etc. The new naming
also makes explicit that the API calls will influence the PM policy
behavior.
All drivers and documentation have been updated accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Re-running the script that checks for the const qualifier missing on
ISR's parameter.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for configuring pins to be used by the nRF PWM, QDEC, and
QSPI peripherals.
A new custom property "nordic,invert" is added to the pin configuration
group binding to allow configuring PWM channel outputs as inverted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a 4k indentity mapping in the MMU for the Processor System GPIO
controller if the parent device node is enabled in the device tree.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Removing backend config from board Kconfig.defconfig and moving
it to xtensa_sim backend configuration in logging. Without this
change define persisted even when logging was not using backends
and that impacted what is compiled in.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move the file from board to soc to make it could be shared by
i.MX8M family. When MCUX_HAL supported in future, this file could
be dropped.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
We could reuse the common linker script, no need use i.MX8M specific
one. BTW i.MX8M family is based on A53 core.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
