The NSIM symbol was removed in commit 9bc69a46fa ("boards: Update arc
em_starterkit support from 2.2 to 2.3").
Guess that UART_NSIM should be used here now, similar to what was done
in commit 45221a9706 ("serial: nsim: Fix impossible-to-enable
CONFIG_UART_NSIM").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added a hidden Kconfig option in arch/arm/soc/nordic_nrf
which is selected by selecting DC/DC circuitry being present
in the board.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for specifying the clock prescaler value for the HF timer
used for generating the PWM signals. This allows for lower timer
frequency and thus slower PWM signals (e.g. for use as servo
controller).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The nRF5x HF timer base frequency is 16 MHz, not 16777216 Hz.
The improved accurracy of the PWM signal was verified with an
oscilloscope on a BBC micro:bit.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fixed the BT_USERCHAN config warning
by setting it only if BT_HCI is selected,
instead of setting it always and relying on it
being set to "no" by not meeting that dependency.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixed the FAKE_ENTROPY_NATIVE_POSIX config warning
by setting it only if the entropy generator is used,
instead of setting it always and relying on it
being set to "no" by not meeting that dependency.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Due to a bug in KBuild, bluetooth samples needed to #include the gatt
sources to re-use code between samples. This bug was not ported to
CMake so we can stop applying this workaround.
gatt source files are now directly added to the 'app' library instead
of having adapter source files in the app's src directory that
\#include's the gatt files.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Invalid configurations should be detected during configuration instead
of during compilation whenever possible.
This patch replaces a BUILD_ASSERT on CONFIG_NET_BUF_USER_DATA_SIZE
with what is intended to be an equivalent Kconfig restriction.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Currently, we add TCP options only to SYN+ACK reply to peer's SYN
(i.e. passive open). For consistency, add them also when we send
SYN ourselves (active open). In both cases, we add just MSS option
currently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Ethernet header is always filled in the first fragment of a packet,
so passing it as a separate function paramter is supefluous.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There's an apparent typo in testing net_buf headroom. Also, after
adding VLAN header support, its size should be used too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Some prj.conf files seem to deliberately override settings from the
board configuration (e.g. samples/bluetooth/hci_usb/prj.conf, with
GPIO=y). Disable the warning about a symbol being assigned more than
once to avoid warnings for those cases.
A list similar to WARNING_WHITELIST could be added later if more
warnings need to be disabled.
Also refactor the warning checking code a bit to get rid of some not's.
Suggested by Sebastian Bøe.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fixes: #8210
Following changes has been made to ensure correct behavior on different
system:
- Python script to detect changes to directories, including empty ones.
When files are modified the list is updated
If sub-directories are added / removed a trigger file is touched to
notify cmake to re-run
- Windows: To detect changes to header files in include for
parse_syscalls.py all files must be individual monitored.
Hence all headers are globbed added to dependencies.
CMake configure depends on the folders so the added /
removed files are picked up.
- Other: Folders are monitored through the python list file so that
added / remove / modified
Added / removed sub-directories are detected through trigger
file in order to re-run cmake.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Fixes: #8210
This commit removes the need for always rebuild when generating the
syscalls.json.
It find the files and subfolders of the include directory and makes
syscalls depends on those.
To find added files / subfolders on all platforms CMake configure
is also depending on the folders found.
This ensures that added files / folders will also be detected at later
stages.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Since they are not used anymore because can be replaced
by CMSIS definition or generated from device tree,
remove IRQ definition file soc_irq.h
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
stm32cube SDK provides defines for IRQ line numbers.
It was not possible to use them, since enum where not supported
by IRQ_CONNECT macro.
Use them in order to get rid of zephyr manually coded IRQ lines.
They will later be replaced by device tree definitions when
made available
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
stm32cube SDK provides defines for IRQ line numbers.
It was not possible to use them, since enum where not supported
by IRQ_CONNECT macro.
Use them in order to get rid of zephyr manually coded IRQ lines.
They will later be replaced by device tree definitions when
made available
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit fixes an issue when user searches for a nonexistent object
(e.g. adsdsaasda) and presses enter.
Having all the key checks in one continuous if statement makes sure that
the very last 'else' statement does not get executed when enter is
pressed.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There was no proper support to timeout an ARP requests which meant
that trying to resolve non-existent IP address left network packet
pending on ARP cache.
Fixes#8019
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In particular, this will turn assignments to undefined Kconfig variables
into errors, which are very easy to miss otherwise (e.g. when Kconfig
symbols get renamed or removed).
Warnings generated by anything tested by CI (scripts/sanitycheck) will
be caught.
Have a whitelist of warnings that are not turned into errors. Some
warnings currently whitelisted should be turned into errors as well, but
would require a bit of work.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The UART_NRFX_FLOW_CONTROL Kconfig symbol was renamed to
UART_0_NRF_FLOW_CONTROL in commit 3f99eefe5a ("drivers: uart: Rename
nrf5 namings to nrfx").
The assignments in samples/bluetooth/hci_uart/microbit.conf and
samples/bluetooth/hci_uart/nrf5.conf were updated in the same commit,
but to the wrong name. Change them to use the correct name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, ARC .config's would get built for this test, giving Kconfig
warnings along the lines of
warning: NUM_IRQS ... was assigned the value "3" but got the value
"38". Check its dependencies...
Add an 'arch_whitelist: arm' so that .configs only get built for ARM.
These warnings will soon be turned into errors.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Recent commits which made the choice of attribute to pass to
bt_gatt_notify() more flexible contained some unfortunate bugs in
handling the attributes and their values. In particular, both calls to
gatt_notify() would in certain circumstances pass the wrong handle
value. This should now be fixed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit sets VECTOR_ADDRESS in prep_c.c directly to the
value of _vector_start for XIP images for MCUs which have the
VTOR register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This fixes an issue of system workqueue stack overflow that was
was observed during Bluetooth Mesh automated testing.
Increase system workqueue stack to avoid MPU faults.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes#8262
For debugging purposes it is useful to know which interface
the dropped packet was received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test kernel.sched.preempt was hanging in the posix arch,
due to a busy wait loop in wakeup_src_thread() added in
a803af2fa7.
We fix it by halting the cpu to let time pass in the posix
arch.
Reenabling the testcase in this board by reverting
e8a906c29c
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The 'source' of subsys/net/ip/Kconfig in subsys/net/Kconfig is already
within an 'if NETWORKING' block, so the NETWORKING dependency in
subsys/net/ip/Kconfig is redundant.
Remove the redundant dependency.
This gets rid of a bunch of 'NETWORKING && NETWORKING' dependencies in
the auto-generated Kconfig docs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According to the Bluetooth Specification v5.0, Direct Test
Mode shall use maximum Tx power.
Fixed by adding nRF5x Radio HAL interfaces to get supported
maximum Tx power for SoC selected, and DTM testing sets the
Radio peripheral to use maximum Tx power.
Fixes#7243
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Replace all register defines and calls with Nordic nrfx HAL.
Simplification of uart shim - assumed only one uart instance.
Added parity bit to configuration options.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As the nRF52840 supports 802.15.4 natively, we should default y
for IEEE802154_NRF5 if IEEE802154 is enabled.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add fixup info for PWM nodes on STM32F0/F1/F3/F4/L4 and remove the
conflicting Kconfig symbols to fully switch STM32 PWM to device tree.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
In some cases, node label could be generated with "/" character
in name string, which prevents compilation
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The nucleo_f334r8 uses STM32F3_PINMUX_FUNC_PA8_PWM1_CH1 inside its
pinmux but it is not defined anywhere.
Add the definition into the pinmux file to fix the build of
nucleo_f334r8 when enabling CONFIG_PWM.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
CONFIG_CLOCK_STM32_APB2_PRESCALER does not exist for STM32F0 as it was
removed from the RCC Kconfig by commit d0678201c3 ("drivers:
clock_control: provide support for stm32f0."). This will break the PWM
driver if compiled for STM32F0.
Conditionally disable usage of this symbol for STM32F0 as all PWMs are
on APB1 for this family.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
