Make the ACL fragmentation asynchronous, freeing the TX thread for sending
commands when the ACL buffers are full.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Instead of printing every audio packet (typically
arriving every 7.5 or 10ms), we now only print every 100th.
Ideally we would add support for changing the number of
"skippe" audio packets at runtime in a shell command, but
that will be postponed.
Ideally we would also have a rx_cnt per stream, but that will
also be postponed to the future, and should be fixed with e.g.
the sequence number (seq_num) as well.
Finally this commit also adds a verification if the currently
incoming data packet contains the same ts or seq_num of the
previous one, and print if it does, as this indicates that
we are receiving some invalid data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The lc3_start_time and lc3_sdu_cnt were not reset properly,
causing it to fail when trying to do start_sine after calling
stop_sine.
This commit also ensures that the sending of the sine wave is
stopped once the stream is either released or stopped.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_le_per_adv_set_data would not accept the ad to be NULL or
the ad_len to be 0, making it impossible to set no data (which
effectively clears existing data).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the advertised length, and the actual length, in the log statement
so it is more clear what the issue is.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In some applications, there is a need to don't start the shell by
default, but run it later on some special condition.
When SHELL_AUTOSTART is set to n, the shell is not started after
boot but can be enabled later from the application code.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Users may want to do some configuration after the kernel is up, but
before initializing the log_core. Making the log_core's init priority
configurable makes that possible.
Signed-off-by: Ian Oliver <io@amperecomputing.com>
There is already CONFIG_SETTINGS_FILE_PATH, which is set to full file path,
while CONFIG_SETTINGS_FILE_DIR is required to be set to its parent
directory. This is redundant, as parent directory path can be easily found
out either during runtime or optionally during buildtime by CMake.
CONFIG_SETTINGS_FILE_DIR was actually introduced recently after Zephyr 3.2
release as a replacement of deprecated CONFIG_SETTINGS_FS_DIR. This means,
that there is no need to deprecate it for 3.3 release and dropping it
should be fine. Adjust 3.3 release notes accordingly, so that
CONFIG_SETTINGS_FILE_PATH will be used directly.
This patch stops using deprecated CONFIG_SETTINGS_FS_DIR. There is actually
no value in respecting it, as setting anything other than parent directory
of CONFIG_SETTINGS_FS_FILE makes no sense.
There is actually one use of CONFIG_SETTINGS_FILE_DIR in file backend
tests, to derive directory for files containing tested settings.
CONFIG_SETTINGS_FILE_PATH is not used there, so it makes little sense to
derive directory name from it. Instead, just use hardcoded "/settings"
subdirectory, as this was the default value of CONFIG_SETTINGS_FILE_DIR.
Deriving parent directory can be done either in runtime or in
buildtime (e.g. using some helper CMake function). Doing it in runtime
however allows to create directory recursively (which this patch actually
implements), e.g. for some more nested FS tree structure. Additionally it
will simplify migration of settings configuration from Kconfig to
device-tree (yet to be developed feature).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
There is little reason to panic on settings backend initialization error.
Such behavior was introduced with initial settings subsystem support, which
was adapted from MyNewt. This is not the usual way how Zephyr handles
errors, so it is time to change that.
There is already handling of some errors by simply returning / propagating
them to caller. Rework all the paths that resulted in k_panic() to also
return error codes.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Schedule CDC ACM tx work to happen 1 ms after first unprocessed data
write. This gives enough leeway for the task writing to the queue to
write more than 1 byte before USB workqueue preempts and schedules IN
transfer. Sending more than 1 byte at a time increases data throughput
because transaction overhead remains the same regardless of packet size.
Prior to this change, virtually every IN transaction carried only one
character when CDC ACM was used as a console.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The CBOR encoding allows strings to have white spaces, and as string
may be used as key it should also be allowed to use space in key.
The commit provides ZCBOR_MAP_DECODE_KEY_DECODER macro, which is
intended to replace ZCBOR_MAP_DECODE_KEY_VAL macro, that allows
to use string keys with spaces in it.
Both macros are available for now.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fix MIC failure transmitting LL_CIS_REQ PDU.
The MAXPACKETSIZE value was not set with using Long Control
PDUs.
Relates to commit e895948047 ("Bluetooth: Controller: Add
Long Control PDU support").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove duplicate PPI/DPPI configuration in
radio_tmr_start_now() which reuses radio_tmr_start_us().
And other minor refactor to remove unnecessary conditional
compilation of a define.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compilation error for ISO Broadcaster with dynamix Tx
power support, and remove setting tx power for ISO
Synchronized Receiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated implementation to save power consumption by
scheduling BIG event starting at the first BIS selected for
synchronization. Also, skip reception of any unselected
BISes in between multiple BISes that the Broadcaster is
transmitting. Added advance calculation of next subevent
channel index.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
From Bluetooth Core Specification v5.3 Vol 6 Part B Section
4.4.6.8 Channel indices,
The subevent number se_n shall be set to the values 1 to
NSE, in order, for the subevents on a given BIS - the same
values shall be used for all the BISes in a BIG - and to 1
for the control subevent.
Hence, fix implementation to reset back to se_n to 1 when
next BIS PDUs are transmitted in the subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix broadcast ISO PDU receive connection handle. The look up
was using BIS index instead of the index of the selected
stream that is being received.
Example, when receiving BISes 2 and 4, only the connection
handle for BIS 2 was correct and connection handle lookup
was out-of-bounds for BIS 4; symptoms being that Host
dropped the received ISO PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Budget for one extra ISO Rx PDU buffer for empty/NULL PDU
reception that has to always remain free in order to be able
to setup radio h/w for new PDU receptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Setting the protocol type for raw IP packets to be sent so that they
can be passed to Ethernet.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
This fixes error log that has been shown if number of calls in the list
was equal to CONFIG_BT_TBS_CLIENT_MAX_CALLS.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When Receiver Stop Ready operation has completed, the Unicast Server
may request to terminate a CIS and set source ASE state to Qos
configured state immediately. But after CIS disconnected completed,
it will transition source ASE state from Qos Configured to Disabling
state. It's invalid and will cause assert.
we should add Streaming and Enabling state check when CIS disconnected.
Signed-off-by: Hang Fan <fanhang@xiaomi.com>
Fix compile error building application with
BT_LL_SW_LLCP_LEGACY. Request Peer SCA command is not
supported in legacy control procedure implementation.
Relates to commit 76439d0ba4 ("Bluetooth: controller:
integrating SCA procedure and adding HCI API").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introducing common pdu struct declarations for conn param req/rsp and
data length req/rsp to utilize identicality for optimal pdu handling
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a central or peripheral is not configured for ISO connected streams,
reject a remote LL_CIS_TERMINATE_IND procedure, responding with an
unsupported feature error (BT_HCI_ERR_UNSUPP_FEATURE).
This fixes EBQ test /LL/PAC/CEN/BV-01-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For making handle available in vendor sink creation, add ISO handle
to function prototype.
Expose datapath allocation via new ull_iso_datapath_alloc function.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Function ll_setup_iso_path has a construction which causes proprietary
compiler to generate incorrect code. As a workaround, local data path
pointer variables are eliminated.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For framed case, the internal RX SDU counter would increment regardless
of whether the first valid SDU was received or not. According to spec,
SDU counter synchronization is done from first valid SDU.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Make sure ll_iso_stream_connected_get returns NULL until CIS is
established. Always return DISALLOWED when trying to disconnect a CIS
which is not connected.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When a CIS is terminated, the associated link pool must be de-
initialized to be ready for next creation of the corresponding
instance in memory.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The sequence id from iperf starts with 1. The commit changes the
initial value of "next_id" in zperf from 0 to 1. In addition, the
error output of "error" and "out of order" packets is corrected.
Signed-off-by: Yanqin Wei <Yanqin.Wei@arm.com>
Log modes other than the deferred may cause unintended delays during
processing of log messages. This in turns will affect scheduling of the
receive delay and receive window for both, Friend and LPN.
Adding a compilation warning instead of assert as a user may still want
to compile a code with friendship feature enabled without actually
establishing a friendship.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The duration value passed to `struct bt_mesh_adv_cb::start` is an
estimation.
When running mesh with BT_MESH_ADV_EXT option, the actual duration will
be shorter and the `struct bt_mesh_adv_cb::end` is called right after
the contorller finished advertising. Using the calculated duration the
lpn node can be configured for a shorter receive delay and receive
window and eventually use less power.
When running mesh with BT_MESH_ADV_LEGACY option, the time when adv will
be sent out by controller is unpredictable. But the time between start
and end `struct bt_mesh_adv_cb` callbacks is always 50ms for a single
advertisement. Therefore, the receive delay can't be less than 50ms.
With this change, adv duration is calculated between start and end
callbacks, but timers are started after end callback is called. Therefore
we need to consider time between two callbacks when setting timeouts for
timers.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If a user does some heavy operations in friendship callbacks
unintentionally, this may break friendship communication as timers will
be scheduled or messages will be queued only after code execution comes
back from these callbacks. To avoid this issue, call callbacks only after
required operations are done.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
