Full resource names aren't as long as combined basename- and name-buffer
sizes but the compiler doesn't know it. Increasing the buffer size to
avoid the compiler warning.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Since the event length update is not necessarily an improvement
in all situations a Kconfig option is added so that it can
be disabled for the users that do not need it.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The sample documentation mentions that the sample can be built directly
on Linux, which was no longer the case. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The old link has expired, the file is no longer avaiable to download.
Update the download link, which now leads to a file in Ubuntu
repositories for the recent LTS release, hopefully making the link valid
for longer period.
As the server ceritficate is signed by a different root CA, update the
root CA as well.
Finally, cleanup how the URL is handled in the sample - for TLS variant
it'll always be provided with a Kconfig, hence no need to repeat it in
the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's often the case with TLS file servers, that the download link does
not lead to downloaded file, but rather redirects to another server.
Therefore it makes sense to have a minimal support in the sample for
HTTP redirection, so that the file can still be downloaded.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When init_igmp is called the ipv4 pointer was not initialised.
Therefore, a different API needs to be used to ensure that IPv4
is enabled when calling init_igmp.
Fixes#53913
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Deprecate the old API and replace with new one which uses
the lwm2m_obj_path struct instead of a string.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate send API using the string references as paths.
Replace it with one using path structs.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate old API and make new API using path structs
instead of using old string reference based paths.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate old API and offer a new API for object and resource
creation and deletion. The new API uses path struct instead
of using a string as a reference to a path.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Enable RT1060 target API test for RT1060. The LPI2C does not support
dual controller/target operation, so LPI2C3 is used as the controller
while LPI2C1 implements the target device.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add some logic in blackmagicprobe.py to guess the GDB serial port based
on the OS instead of just trying the flag or /dev/ttyACM0.
The new logic explicitly looks for the well known path for BMP on Linux
(/dev/ttyBmpGdb), so that we can remove it from the board files that
have it set explicitly right now. At the same time it still allows
setting the port from the flag and also checks an environment variable,
so that it can be used for systems with multiple probes.
As a fallback, it looks for a valid serial port, picking the first one
(the probe creates two, the GDB one is the first one), and raise an
exception if nothing is found.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Recently the blackmagicprobe command for "connect under reset" has been
updated from "connect_srst" to "connect_rst". Update the flag name in
the west blackmagicprobe binding, keep the old one as well for
compatibility with out of tree boards, and send both the old and new
commands to GDB so that it works with both the old and new firmware. GDB
is going to get a "command not supported by this target" for one of the
two and proceed with the other one.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Proper handling re. non-supported CIS TERMINATE
This fixes EBQ test LL/PAC/CEN/BV-01-C on the general level.
'Replaces' #ee2a43b5dc
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add option to disable CRC for fcb entries. This improves the write
throughput significantly at the cost of not detecting corrupted data
in flash. This is beneficial for aplications that needs the extra
write throughput, where error detection is done elsewhere.
Allow the FCB entries in flash to have a valid CRC when CRC is
disabled in the FCB. This allows existing solutions to disable
CRC checking, while keeping the CRC areas intact. Note that this
is a one-way option.
Fixes#53707
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
Ultil now Cortex A/R aarch32 implementation for context
switching expects that interrupts was disabled. This is
true if a context switching happens at thread context.
But if a context switching happens at last action during
interrupt context, this assumption is not true because the
interrupts are still enabled (to allow nesting interrupts).
Disable interrupts at the last interrupt action to ensure
the interrupts are always disabled before context switching
is processed
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
This ensures that all pending writes are committed. This is relevant for
flags in .noinit SRAM that are read back after reset.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
- Applied changes on the most recent version of the driver
- Using CONFIG_ETH_MULTICAST_FILTER to enable/disable the hash filter
- Using read-modify-write the hash table for a single address
when joining
- When leaving rebuild the entire hash table and ensure that multicast
addresses used for the hash calcuation doesn't have the joined flag set
I have tested these conditions:
- IGMP enabled and disabled on my ethernet network
- Observed the network utilisation on a STM32H7 device running these
changes with the hash filter enabled and disabled while the device is
on a ethernet network with high rate multicast traffic
- When the application closes a socket for a multicast receive, ensure
it doesn't affect the receiption of existing sockets as well as IGMP
Fixes#53773
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Use the MAC's hash table to filter incoming multicast frames that are
targeted to subscribed multicast groups and discard all others.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
# Conflicts:
# drivers/ethernet/eth_stm32_hal.c
This reverts commit 271b306.
In rare conditions, this commit causes the uart shell mechanism to
corrupt on Cros ec system. Revert this commit on upstream repo first to
avoid blocking the development. Will dig out why this symptom occurs
later.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
When the PAUSE or STOP command was triggered, the driver was first
requesting the PDM peripheral to stop by calling nrfx_pdm_stop() and
then it was setting a flag that was in turn checked in an interrupt
that was generated when the PDM actually stopped (what happens a moment
after the stop request is made). But that setting of the flag could get
preempted and the interrupt handler could get executed first causing
the stopping to be not handled properly and leaving the driver falsely
considering the peripheral as still active.
This commit reverses the order of these two operations to avoid
the described race condition.
Same sequence is corrected also in event_handler(), but this is
done only for consistency (it is in the interrupt handler itself
so there is no race possible in this case).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Cancelling transfers on suspend contradicts Universal Serial Bus
Specification Revision 2.0, 9.1.1.6 Suspended:
* When suspended, the USB device maintains any internal status,
including its address and configuration.
The internal status definitely includes any pending USB transfers.
If there is a class that wants to cancel transfer on suspend, then the
cancel should be initiated by the class, not the device stack itself.
Update hal_nordic to a version that does not abort all endpoints at
suspend. It seems that aborting endpoints on suspend in nrfx driver was
the actual reason why transfers were canceled on suspend.
Remove transfer retriggering on resume from CDC ACM and Bluetooth class
implementations because transfers are no longer cancelled on suspend.
Other classes do not have any suspend related workarounds implemented.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When we receive Node Reset message, we schedule work in the system
workqueue to call bt_mesh_reset(). In bt_mesh_reset() we call
bt_conn_disconnect() to disconnect proxy client. bt_conn_disconnect()
will put a buffer to a pool and call k_sem_take to let BT HCI TX thread
process this buffer. Because we stop scanner after disconnecting the
proxy, we can still receive a message at this point. Since BT RX thread
has higher priority than the system workqueue, if we receive a message
while in bt_mesh_reset(), it will be processed when we call
bt_conn_disconnect().
Stop scanner before resetting the mesh to avoid processing of a received
mesh message while in the process of resetting mesh.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If, while storing app or net key, or changing cdb, we receive another
mesh message that affects setting of the same key that the mesh
currently stores, the new change won't be stored.
The settings subsystem API has rescheduling point inside. The mesh
settings are stored in the system workqueue and by default mesh messages
are processed from BT RX thread which has higher priority than the
system workqueue.
When the case above happens, a new change will be written to the same
cache entry. But this cache entry will be invalidated after leaving
settings API, which in turns will invalidate the new change:
- Receive Config AppKey Add message
cfg_srv.c -> app_keys.c: bt_mesh_app_key_add()
app_keys.c: update_app_key_settings()
app_keys.c: bt_mesh_settings_store_schedule()
- store_pending() in settings.c is scheduled
settings.c -> app_keys.c: bt_mesh_app_key_pending_store()
app_keys.c: store_app_key() called to store new app key
app_keys.c: settings_save_one() calls flash driver and sleeps
- Receive Config AppKey Delete message while in sleep,
which wakes up BT RX thread before returning to the system workqueue
cfg_srv.c -> app_keys.c: bt_mesh_app_key_del()
app_keys.c: update_app_key_settings()
app_keys.c: app_key_update_find() finds entry and returns it
app_keys.c: update->clear = 1
app_keys.c: bt_mesh_settings_store_schedule()
- returning back to bt_mesh_app_key_pending_store() from
settings_save_one()
app_keys.c: update->valid = 0
- the key won't be deleted next time store_pending() is scheduled.
This change moves entry invalidation before calling settings API so that
after returning from settings API, a new change won't be unintentionally
invalidated.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a short example of how the broadcast code for BIGs shall
be used.
The spec states:
"On all levels other than UI, the Broadcast Code parameter shall be
represented as a 128-bit value. The transformation from string to
number shall be by representing the string in UTF-8, placing the
resulting bytes in 8-bit fields of the value starting at the least
significant bit, and then padding with zeros in the most
significant bits if necessary. For example, the string “Børne
House” is represented as the value
0x00000000_6573756F_4820656E_72B8C342.
"
So "Børne House" becomes
[42, C3, B8, 72, 63, 65, 20, 48, 6F, 75, 73, 65, 00, 00, 00, 00]
when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The number of HPSRAM memory blocks in use is reported to the
PMC via the sideband channel supported by the communication widget.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Intel DSP Communication Widget is a device for generic sideband
message transmit/receive between IPs in a SOC.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
This fixes the application that was not waiting for QoS configuration of
all streams in the group. The QoS operation is done on group of streams,
while the status of each one of the streams is received separately.
Meaning that the application has to control which streams were already
configured before enabling them.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Allow the streams to be paired when creating unicast group. This will
allow to reuse the same ISO for the paired streams.
Fixes: #51796
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
