Add the ISO packing field when creating a unicast group.
This refactors the structure of the unicast group create,
as it now takes both the packing as a group parameter, as well
as an array of stream-specific parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When there is an ACL disconnect, or the unicast group is otherwise
deleted, the endpoints were not properly handled, causing
incorrect `dir` values and ASSERTs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When adding or removing a stream from the group, the
endpoint may or may not have been allocated depending
on the state of the endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The hci_le_setup_iso_data_path function required that if
the path->cc was set, the length could not be 0.
There is no reason why it should not be allowed to be 0
in that case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast client could not create a CIG with a unidirectional
CIS, because it would not set the correct values as per the
HCI spec for the unused CIS direction.
Instead of implementating a work around, this commit modifies
it so that for unidirectional CIS, we copy the QoS values
to the unused direction, so that we always set valid values,
but it also allows us to actually use that CIS direction later,
assuming that the QoS settings does not change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For the unicast client, the direction for the endpoint
is reversed in terms of RX/TX, i.e. a sink endpoint is
RX for the unicast server and broadcast sink, but TX
for the unicast client, and similar for the source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As written, the title and description of the Kconfig option seem to
specify the logging sub-system will not flush until the buffer is full.
Someone reading this would expect that shorter log message will not be
flushed until the specified number of bytes accumulate.
This is not the case. Each log message is flushed when finished. The
size is only the maximum bytes of a single formatted message's contents
that will be accumated before the backend flushes.
What's more, it only applies in deferred mode. In immediate mode there
is no buffering, not just of multiple log messages but also of the
message contents as they are formatted.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
bcdHID is intended for the spec version of USB HID. It was pointing to the
v1.1 bcdUSB define which happens to be the same value for the v1.10 hid
spec version. This corrects it to use the v1.11 HID spec.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
websocket_recv_msg() is reworked with using fsm. Now the function
return 0 when payload is empty, -ENOTCONN if socket close. Receiving
empty ping and sending empty pong were added in tests.
Fixes#52327
Signed-off-by: Grixa Yrev <grixayrev@yandex.ru>
The macros are added to make clear which fields of `struct
bt_mesh_msg_ctx` needs to be initialized by an application.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This changes HAS registration to be dynamic and let's the
application set Hearing Aid Type and binaural features.
Often, devices are flashed with generic firmware with some
features stored post factory production, requiring
the settings to be moved from compile time to run-time.
This change will increase the RAM usage as the GATT
service is moved from ROM to RAM.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Co-author: Soren Engquist <soren@engquist.dk>
This change changes the previous mcumgr behaviour of return result
codes when the status is 0 (OK) to being legacy behaviour, instead
it will skip the rc field for these responses. If there is only an
rc field with status 0 to return, then mcumgr will now instead just
return an empty map.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add API to do the BAP Broadcast Source Metadata update procedure,
which updates the metadata of a broadcast source while
it is streaming.
This is also makes all checks for the "head stream" the same.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The codec is assigned to the stream. However since the metadata,
which is stored in the codec, may be modified by other means,
the stored pointer cannot be const, and thus the
codec argument to bt_audio_stream_reconfig cannot be const
either.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Decoupled the ASEs from the ASCS Session and made them dynamically
allocated instead. A Kconfig option was added to set the maximum
number of active ASEs at a single time. The intent here is to allow
the developer greater control over memory usage; this fix addresses
one of the largest ram usages in le audio.
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
Refactored out the client and server members of the endpoint struct
and placed the relevant members in wrappers in ascs and
unicast_client.
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
Add logging of the fields in the sent and received pairing
requests and responses. This makes it easier to debug
why a pairing would be e.g. rejected, or simply to get
more insight in the resulting pairing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
IEEE802154 L2 may modify the LL address during interface operation (when
processing MAC command). So far the L2 workaround the LL address update
protection by clearing the NET_IF_UP flag temporarily, but due to recent
changes it no longer works. Update this workaround to verify
NET_IF_RUNNING flag instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bluetooth IPSP L2 sets the LL address only after establishing Bluetooth
connection. As this can take place after the interface was brough UP by
the application, the network interface API should not block such
attempt. Instead, verify the NET_IF_RUNNING flag.
For the same reason, move the assert verifying that LL address is set
from net_if_up() (which only puts the interface in the admin UP state)
into the function that transitions the interface into operational UP
state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After network interfaces state handling rework, it's no longer correct
to verify the connection status on `net_if_up()`, as this only changes
the administrative state of the interface. The interface won't be put in
operational UP state until it's connected.
This check prevented the interface from being brought up during system
boot.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If CONFIG_BT_BREDR=y and bt_dev.le.acl_mtu == 0, then we
would report the bt_dev.br.mtu for ISO channels.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the bt_dev.le.iso_mtu was 0, then we would report
bt_dev.le.acl_mtu if CONFIG_BT_CONN=y (which is often true when
CONFIG_BT_ISO=y). Thus if the ISO MTU is 0, we would often
return a non-0 value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of only conditionally starting the discovery at
0x0001, we now always start it at that handle. Since we are
reading by UUID, this should not really affect performance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
mcc.c used 0x%016x, but for some platforms we need to
be more explicit and use 0x%016llx to avoid compile
warnings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The HAS implementation of the security_changed callback
expected all devices to have bonded, and thus always added them
to the ntf_bonded implementation.
This adds a check to whether the device is actually bonded.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Prototypes of those functions are already in header files in
subsys/settings/include/settings/ directory, so no reason to have
duplicates in C files.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This fixes an issue whilst investigating using iterable sections,
which cannot be used when the non-zephyr prefixed functions are
used. It also resolves a possible critical bug intoduced with the
MCUmgr rework whereby functions or elements seem to have silently
dropped.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Rewrite the "net ping" command handling, to allow the command to be
aborted during execution. This includes:
* Using shell bypass mode to capture input whilst the ping is active.
* Using system workqueue to send individual ping requestes, instead of
sending ping requests directly from shell thread, in a blocking
manner. This is needed because in order to receive input in the
registered bypass handler, the shell thread must be unblocked to
process the input.
* The bypass mode is left after receiveing `CTRL-C` character (which
cancels the ping), after receiving all expected Ping replies or after
the timeout occurs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If bypass mode is left outside of the registered bypass handler, the
command buffer was not cleared, basically containig leftovers from the
processing of the previous command. This resulted in undefined behaviour
on consecutive shell operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The PM subsystem should not call the PM control callbacks on
uninitialized devices when entering low-power states.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
The address could have changed. The issue linked (and bsim test in previous
commit) shows a scenario where that could happen:
- we start scanning, host will use NRPA
- we start advertising, host will use identity address
- a device connects (as a central)
-> advertising resume fails for some unrelated reason
- another device connects (as a peripheral)
- the central device disconnects, we resume scanning
- the peripheral disconnects, the stack resumes advertising
-> but it mistakenly advertises using the NRPA set by the scanner
Fixes#52059 .
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is initial support. Necessary to test the UHC driver API,
for the USB support test implementations, and upcoming USBIP support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Moved the name filter last, as that it the most expensive
to use.
The address filter has almost been moved after the more
trivial checks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add filtering for the pa_interval. This can be used to
easier find devices that are advertising with periodic
advertising.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The status field is currently a uint32_t even though there are only
3 possible values. Reducing it to a uint8_t allows status to fit in
existing padding in the struct, saving 4 bytes per ticker_user_op
Updated function signatures to match; ticker_op_func left as-is
to avoid having to update a whole bunch of files for no real benefit
Signed-off-by: Troels Nilsson <trnn@demant.com>
To be able to call pm_device_runtime_put() from an IRQ context, move
from mutexes to semaphores and force the async path when the put
operation is called from an ISR.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For the async operation move from condition variables to events to
reduce the dependency on the mutexes that cannot be used in IRQ
context.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The `TEST_RANDOM_GENERATOR` symbol in itself does not imply that a
non-random number generator is selected -- that is indicated by the
`RNG_GENERATOR_CHOICE` choices, of which only `TIMER_RANDOM_GENERATOR`
is a non-random generator.
This commit updates the Random subsystem to print the "non-random
number generator usage warning" when `TIMER_RANDOM_GENERATOR` is
selected, as opposed to when `TEST_RANDOM_GENERATOR` is selected.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The `TEST_RANDOM_GENERATOR` Kconfig symbol indicates that a non-random
number generator (i.e. a random number generator that is not truly
random) is _allowed_ to be used for testing purposes, and not
necessarily that a non-random number generator is _selected_ -- that is
indicated by the `RNG_GENERATOR_CHOICE` choices that depend on
`TEST_RANDOM_GENERATOR` (i.e. only `TIMER_RANDOM_GENERATOR` as of now).
This commit updates the `TEST_RANDOM_GENERATOR` Kconfig symbol
description to reflect and clarify that.
It also removes the `TEST_RANDOM_GENERATOR`'s dependency on
`ENTROPY_HAS_DRIVER` because the act of _allowing_ a non-random number
generator to be used does not depend on the availability of an entropy
driver -- when an entropy driver is available, by default, the
`ENTROPY_DEVICE_RANDOM_GENERATOR` will be selected; otherwise,
`TIMER_RANDOM_GENERATOR`, a non-random generator, will be selected.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Since 6c30c9ac47 (samples: net: zperf:
Rewrite upload part to use sockets), zperf uses SO_RCVTIMEO in UDP mode,
hence must depend on/enable support for it.
Without SO_RCVTIMEO support, zperf fails like this:
> nb_packets=47 delay=188964 adjust=-13
> setsockopt error (109)
> setsockopt error (109)
> -
> Upload completed!
> LAST PACKET NOT RECEIVED!!!
> Statistics: server (client)
> Duration: 0 us (10.19 s)
> Num packets: 0 (50)
> Num packets out order: 0
> Num packets lost: 0
> Jitter: 0 us
> Rate: 0 Kbps (9 Kbps)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
In case CIS failed to be established, leave the ASE in enabling state
waiting for peer to retry.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Allow enabling CDC ACM logging only if CDC ACM is not used as logging
backend. This prevents endless recursive logging loop, especially
visible when minimal footprint logging is enabled.
Fixes: #52981
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Only copy the data from the 'parent' buf into the segment buf if we
successfully acquired the HCI semaphore (ie there are available controller
buffers).
This way we avoid pulling and pushing back the data in the case where there
aren't any controller buffers available.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When there are no buffers, it doesn't make sense to repeatedly try to send
the host TX queue.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
