Remove parts of overlays for nRF targets that were just copied from
the adc_dt sample but are not used by the adc_sequence sample and only
generate confusion here.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extend I2S testing with additional test cases that verify
I2S/TDM driver operation at various configurations.
Check:
- word sizes of 8, 16, 24, 32 and 48 bits;
- one, two, four and eight audio channels configuration;
- data format I2S, Left Justified, Right Justified,
PCM Long, PCM Short;
- data order MSB and LSB first;
- bit clock and frame clock inversion;
- block size of 6 bytes;
- bit clock continuous and gated;
- internal loopback;
- pingpong option.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
When set 'wifi reg_domain' CMD, need to create and download countryinfo
to sync driver and FW for embedded supplicant case
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add information how the net_mgmt request handler is changed.
The event number type is changed from uint32_t to uint64_t to allow
the event command to be a bit mask instead of enum value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We cannot use the network management event number directly as
a socket option value because the management value is uint64_t
and that cannot be mapped directly to 32 bit integer.
So have an intermediate socket option that is mapped to actual
network management request number in getsockopt() and setsockopt().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using 32 bit enum values for event numbers, convert
the code to use 64 bit long bit fields. This means that the
user API is changed to use 64 bit event values instead of 32
bit event values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update the input_thread function signature to match the expected
k_thread_entry_t type:
typedef void (*k_thread_entry_t)(void *p1, void *p2, void *p3);
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
Add `k_heap_array_get` as an alternative to `sys_heap_array_get`, which
only returns statically defined heaps (those defined with
`K_HEAP_DEFINE` or `K_HEAP_DEFINE_NOCACHE`), but doesn't depend on the
application guessing a value for `CONFIG_SYS_HEAP_ARRAY_SIZE`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit makes the Radio workqueue priority configurable by the
application. Additionally, the default priority has been adjusted to
allow transmit operations to occur before the entire RX queue is
processed.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
Ensure encoding of options with large deltas works as expected by using
an "experimental" option 65100.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix usage of the wrong variable in insert_be16 which could cause
insertion at the wrong offset.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This change will allow the VIRTIO-MMIO register definitions
to be shared.
Additionally, the register names from Ver1 were being used,
even though the implementation was based on the Ver2 specification.
Also, I addressed this issue.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The `end` variable should be calculated based on the device's register
size, not the address. Probably never caught before as user typically
provides a buffer of reasonable size...
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
While it would likely not directly cause issues with the current
implementation, the logic of turning off the sensor should be to
actually reset the flags, not to toggle them.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated the CONF_STATUS0_DEV_ROLE macro to ensure proper bitwise
operation by adding parentheses around the bitmask operation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
SYS_PORT_TRACING_OBJ_FUNC_* are for when the function being
traced is a method of an object. Use SYS_PORT_TRACING_FUNC_* instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add error handling for the return value of gnss_nmea0183_snprintk
so as to avoir sending garbage to the modem.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Correct improper doc for return value, document the negative error
codes, and add more details re: what the function does.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
I3C callbacks are registered by upper layer. Driver layer must check if
a callback is not NULL before calling it
Signed-off-by: Nghia Phung <nghiap@amperecomputing.com>
When Hotjoin complete and dynamic address is assigned to target,
INTR_DYN_ADDR_ASSGN_STAT interrupt will be triggered, we can use sem_hj
to notify dw_i3c_target_ibi_raise_hj() about Hotjoin completion
Signed-off-by: Nghia Phung <nghiap@amperecomputing.com>
Added NETC ENETC nodes, MDIO node, and scmi power node which will
be used to power up NETC MIX in dtsi file.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cleaned up NETC driver in drivers.cmake to add i.MX943 NETC
driver support, and to disable msgintr/irqsteer for A core.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Some external flash modules have extra commands to support, for example,
reading/writing an OTP zone. Given that the commands are highly specific
and difficult to generalize, we add two ex ops that can be used to
transmit a custom command (in the form of a full QSPI_CommandTypeDef) and
then read or write a user-provided buffer.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Support booting from any usable core in systems with partially
fused-off CPUs. Update get_cpu_logic_id to iterate over the actual
number of enabled CPUs using DT_CHILD_NUM_STATUS_OKAY(DT_PATH(cpus))
instead of CONFIG_MP_MAX_NUM_CPUS.
Resize the voting[] array based on DT_CHILD_NUM_STATUS_OKAY to ensure
each CPU can vote correctly.
Signed-off-by: urvashi sharma <urvashis@qti.qualcomm.com>
The utility may be used during development stage to get
ambiq platform specific timing parameters for mspi devices.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
This device driver supports ISSI is25w/lx032/64 series flash.
Only extended SPI mode(1s-1s-1s, 1s-8s-8s, 1s-1s-8s) is implemented.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
