Fix 'drivers.ipc.mailbox' test suite to restore and improve
its testing functionality:
* fix printf() redirection through IPM console.
* fix and check the dummy driver initialization.
* specify correct Twister harness type (Console)
and use matching patterns to recognize the expected
console output.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Workaround failing autopts weekly run due to tester
application having Bus Fault in the nRF53 NET core hci_ipc
firmware at startup.
Having atleast 32 bytes free in nRF53x hci_ipc sample to
avoid Bus Fault when Zephyr Kernel does SYSINIT calls.
Reduce supported ISO Broadcaster instance and ISO TX buffer
counts in the Controller hci_ipc firmware.
Add sysbuild support for tester application so that the
build is CI verified.
sysbuild commandline for LE audio PTS testing:
# west build --sysbuild -b nrf5340_audio_dk/nrf5340/cpuapp
-d build/tester tests/bluetooth/tester
-DEXTRA_CONF_FILE="overlay-le-audio.conf"
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updating the minimum Ram Size for failing tests
that require more ram memory for heap allocations.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Adds the object core configuration to the latency_measure benchmark's
testcase.yaml file as there have been requests for it.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
In ARM architectures the entry_cpu_exception_extend calls
svc #0 when trying to generate a `K_ERR_CPU_EXCEPTION`, however
z_arm_svc calls z_do_oops with a stack frame only, and gets the
reason from `r0`. This means that the test working was just lucky
and running it with another compiler (or setting the value of r0
before the svc #0 call, made the test fail).
Cortex-A/R 32-bit architectures was doing a BKPT, this works better
but will not be a hard exception when debugger is attached.
I switched all the Cortex 32-bits to the ARM specified undefined
instruction.
Also RISC-V has a designated unimp instruction that should be used to
guarantee trap.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
For some weird reasons, enabling ICOUNT would result in some
tests crashing QEMU. So disable ICOUNT.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The test had a few off-by-ones in the code, which caused access
to invalid data.
Fixed by setting the right buffer sizes and the right AD length
fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
GAP PAST (and BAP) tests were also enabled since controller support is
under review.
This also adds bqw file which is exported draft project from
Qualification Workspace.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The test was not being run on arm64 and riscv because the filter was
incorrect. Properly fix the filter to run the test on all platforms
that have any kind of MMU enabled.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Most of the tests in the LLEXT subsystem test suite run with memory
protection hardware (MPU/MMU) disabled, to avoid including memory domain
issues while testing the core functionality. Only a few tests need to
run with MPU/MMU enabled.
This patch simplifies the testcase.yaml by setting the memory protection
as disabled in a shared config file that is included by most tests.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Restore Apollo boards now that the issue has been fixed.
Also remove extra CONFIG_SOC_SERIES_S32ZE filters, as they are already
covered by the 'platform_exclude' common section.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The fs_loader test is always executed in the main test source when
CONFIG_FILE_SYSTEM is set, and this is in turn enabled by per-board
config overlays. So there is no point in having a separate test case:
it is simply a duplicate of the "readonly" test.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Fix a problem with the test that manifested itself with a surprising
assertion failure at lib/utils/onoff.c:283. Apparently, due to the
stack being too small, some memory got accidentally overwritten.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If a string is already present in the provided buffer,
prometheus_format_exposition() appends it instead of overwriting,
hence the buffer needs to be cleared on the test start, otherwise it
works by chance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes the zbus publishing statistics test to account for a non-zero boot
delay, which is often used in hardware testing environments. This fixes
an assertion failure observed on multiple max32 boards in the adi board
farm.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
These tests have been seen failing in CI due to the
real time execution timeout. Let's increase it so it does
not happen.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
k_sleep may not be enough to let advertiser send the message. Instead we
should rely on the bt_mesh_send_cb.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
As part of TinyCrypt deprecation process (#79566) this commit
removes usage of this library from the JWT subsystem and its
related tests.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add test for cbprintf_package_convert function which checks if
it correctly handles array that holds string lengths. When convert
function is used twice, at first to calculate size of the output
package and then to actually convert the package, array of string
lengths can be used to optimize operation by not calculating
string lengths twice. However, array may not be able to hold all
string lengths that are needed for that package. In that case,
string lengths that did not fit into the array will be calculated
twice, in both conversions.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If we receive poll() error during a request, it must
be forwarded to application.
If instead receive poll() error later, it should not be
forwarded as it might be result of application closing the
socket.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Refactor the CoAP retry handling into the handle_poll() function,
so that we only try to send retries if the socket reports POLLOUT.
Also move the receiving into same loop, so when poll() reports POLLIN
we recv() the message and handle it before proceeding to other sockets.
Also fix tests to handle POLLOUT flag and add support for testing
multiple clients.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Coverage for cmsis rtos APIS should is provided using simulation, we
should not build those on every platform we have. Avoid failures due to
incompatiblities in requirements coming from various boards and also
reduce churn and noise during testing and CI.
Fixes#80215
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CAP tests used u_group->cig->index but the u_group->cig may
have been deleted when the stream is released, which meant
that u_group->cig == NULL when e.g. unicast_stop_complete_cb
was called and that could cause failing tests as the index
would just be a uninitialized value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change pins that are used for qdec nrf54h20dk to align with shield
(loopbacks) used in internal CI. This change is needed to start
qdec driver power management testing.
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
sqrtf() is used for floats but the argument and resulting
variable are both doubles. LLVM would complain about
implicit conversion from float to double. So use sqrt()
instead as it is used with doubles.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The stream flash test has been written with SoC internal
storage in mind and its simplified structure does not take
into account possibility of existence of devices with
different erase characteristics, at run time.
The commit fixes the test failing with Nordic bords that
have CONFIG_SPI_NOR=y set by default, which made test
to behave like device with erase capability has been tested.
The commit sets CONFIG_SPI_NOR=n for nrf54l devices.
Fixes#79181
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add log statements for each command, event and response
for debugging purposes.
Tests do not send enough of these to clutter the IUT logs
and it is useful for debugging to more easily determine
what command triggered a function call or when the
responses and events are sent to the AutoPTS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commits defines the `#power-domain-cells` properties for fakedomain
nodes in the HiFive Unmatched devicetree overlay file.
Without this change, this tests fails to build for the `hifive_unmatched`
Zephyr target.
Fixes#80503.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
In 82d8f09de1
the bt_conn_foreach prototype was changed, but these unit tests
kept using the old prototype which leads to a build warning.
Let's fix the prototype in the tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Refactor the sample so that multiple advertising setup can
be reused in other sample if required. Bluetooth enable can
be in the sample that reuses the advertising setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds new tests for verifying the functionality of the board
and SoC extension feature.
It does so by defining:
- A new CPU cluster on an existing SoC
- Two new board variants on top of an existing board
The new board variants are defined on top of the existing `native_sim`
board, so that the following native_sim board targets are available for
the test.
Existing board targets:
- native_sim/native
- native_sim/native/64
Extended board targets:
- native_sim/native/one
- native_sim/native/64/two
The new CPU cluster is defined for the existing `an521` SoC.
Existing CPU Clusters on an521:
- cpu0
- cpu1
New CPU Cluster:
- cputest
For SoC tests the mps2 board is used.
This means that for testing, the following board targets using the an521
SoC are:
- mps2/an521/cpu0
- mps2/an521/cpu1
- mps2/an521/cputest
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The test implementation is based on a copy of the HFC multilink test.
The test verifies that the stack respects the reference counting of SDU
buffers when the L2CAP -EINPROGRESS feature is used.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This is shorthand for random static addresses. It's similar to
`bt_addr_le_from_str`, but is a macro that results in an object literal,
making it more versatile and less verbose.
This macro only gives access to the first 255 random static addresses,
but this ought to be enough addresses for testing.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The commit splits default FCB scenario into one with endmarker
enabled, the original one, and one with disabled.
This allows to test the FCB in cases when CONFIG_FCB_ALLOW_FIXED_ENDMARKER
is set and not set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit fixes minor copyright issues and corrects the compatible of
gpio-stepper with the vendor name as zephyr
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
