In preparation for RT500 ADSP enablement, consolidate common Xtensa
configuration parameters in top level Kconfig.defconfig.
Signed-off-by: Dmitry Lukyantsev <dmitrylu@google.com>
ESP32 flash_mmap() function requires `_rodata_reserved_start` address
to be at the beginning of RODATA. This allows adding memory-mapped flash
areas.
Fixes#52764
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This patch contains small refactor of lpsram init function (defines
registers and adds new macro).
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This changes qemu_xtensa to use dc233c core instead of
sample_controller. The sample_controller uses a very
basic configuration which lacks features usually needed
in real world applications. Instead, use the dc233c core
as the base for qemu_xtensa so we can use QEMU to cover
more of our code path.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If the channel was used for 16bit in the once, subsequent 32bit sample size
audio will be broken since the SCS bit remains set.
Example sequence with SOF:
normal audio playback with 16bit
ChainDMA audio playback with 16bit
normal audio playback with 16bit
The last playback results garbled audio.
Introduce intel_adsp_hda_set_sample_container_size() helper function
to handle the SCS bit and use it in the driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Commit 759e07bebe ("intel_adsp: move memory window setup to
PRE_KERNEL_1") moved memory window setup from EARLY to
PRE_KERNEL_1. Similar change must be done to boot_complete, or
otherwise boot-up sequence will not be completed correctly
on all platforms.
Suggested-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This renames the board from qemu_xtensa_dc233c to
qemu_xtensa_mmu to better signal that it is for testing with
MMU on QEMU Xtensa. Also turn on testing by default to make
sure future changes will not break Xtensa MMU support.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The symbol _end is used to indicate the start of heap in
the common libc malloc code. On ACE, heap is in uncached
area. However, _end was in the cached area while end of
heap is in uncached area. This resulted in incorrect
calculation of heap size. So move _end into uncached
area so correct heap size can be calculated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
PRE_KERNEL_1 is more suited for dealing with devices, so move out of
EARLY.
Verified on hardware and things seem to behave the same. Something was
changed since this was first introduced as this was not possible for
some reason.
Fixes#62627
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flash segments require VMA to proper work. Executing from LMA
is not possible. Current implementation did not take into account
runtime iterable rom sections that any application could implement.
In the above cenario and as reported in the issue below, ESP32 won't run
when those ROM sections are created in application level.
This change make sure all flash segments are properly mapped
accordingly.
Fixes#61834
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Selecting Low Power clock has the same result as selecting High
Performance clock (now IPLL). Therefore, the LP clock will be removed
from the list of available clocks on ACE family platforms.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Updating value of WOVRCO request bit in CLKCTL register according to the
documentation. Previus value was mask used for clock enabling.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Created set of new functions for configure fir coefficients with support
for packed format. This allowed to make the dai_dmic_set_config_nhlt
function simpler.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
All fir filters have an identical set of registers so their definitions
were combined to simplify the code. From the dai_dmic_set_config_nhlt
function, a duplicate piece of code responsible for configuring fir was
separated into a new function.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
All PDM controllers have the same set of registers. Their definitions have
been merged to simplify the code.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
The assert on L3_MEM_BASE_ADDR is incorrect, we need must convert
to uncached before use.
Fixes: ffd2121c65 ("soc: xtensa: intel_adsp: cavs: fix
power_down_cavs() signature")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
To properly setup L1 exit timing this patch will use buffer interrupt
for HOST DMA and wait for Host HDA to actually start
First interrupt will clear all others.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Adjust the memory organization to avoid overlapping
critical regions from bootloaders (MCUboot and IDF)
Signed-off-by: Almir Okato <almir.okato@espressif.com>
The second argument 'uint32_t *hpsram_pg_mask' must be a cached
pointer and this needs to be reflected in function prototype.
Fixes sparse warning:
/zep_workspace/zephyr/soc/xtensa/intel_adsp/cavs/power.c:106:63:
warning: incorrect type in argument 2 (different address spaces)
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Converting between cached and uncached aliases should have correct
sparse annotations. Fix following sparse warning:
/zep_workspace/zephyr/soc/xtensa/intel_adsp/cavs/power.c:97:53: warning:
incorrect type in argument 1 (different address spaces)
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Use WAIT_FOR to wait for core power changes to be reflected
in status registers. If core power state does not complete in
10ms, k_panic() is raised.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Use WAIT_FOR to wait for clock source to be enabled. If clock does
not come up in 10ms, raise k_panic().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This adds SoC and board configs to support the dc233c core
that is available on QEMU. This core has more features than
sample_controller, such as MMU support.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With gcc from the zephyr sdk and -Wold-style-declaration is giving this
output:
zephyr/arch/arm/core/aarch32/cortex_a_r/fault.c:101:1: warning:
'inline' is not at beginning of declaration [-Wold-style-declaration]
101 | static void ALWAYS_INLINE
z_arm_fpu_caller_save(struct __fpu_sf *fpu)
| ^~~~~~
I searched to all of the source code to find these further occurances
where inline is not at the beginning of a function declaration.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The existing heap starts at the beginning of SPIRAM which is also occupied
by the WiFi stack if CONFIG_ESP32_WIFI_NET_ALLOC_SPIRAM is enabled. This
results in memory corruption.
Update the linker description to add a _spiram_heap_start symbol and add a
KConfig size option to allow the SPIRAM stack to be correctly located and
sized. Requires matching commit in hal_espressif.
Fixes: 61359
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
For some weird reasons, if the sections in linker script are not
in memory address order, there are lots of padding involved in
zephyr_pre0.elf. This moves the .intList section to its memory
ordered location. When building hello_world, this shrinks
zephyr_pre0.elf from 512MB to 339KB.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implement the sys_poweroff hook for all ESP32 SoCs based on the previous
SOFT_OFF implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In case of HDA Link DMA FIFORDY bit is RO according
to HW specification thus should be managed by HDA controller.
Add a logic to set FIFORDY for HDA Host DMA only
Signed-off-by: Ievgen Ganakov <ievgen.ganakov@intel.com>
File was using stdint.h defined types without including and caused a
build error depending on include ordering.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add an option to control whether or not hpsram banks should
be switched off during the power down. This is particular useful
when running tests because we don't want to lose the contents
of the memory window before we capture it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
