The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Currently DMA overrun errors are ignored. Forward the error
to the user using the UART_RX_STOPPED with UART_ERROR_OVERRUN
reason.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
If an overrun happens the user may decide to stop the dma which
unsets the DMA line. Currently, the line is always re-enabled after the
callback.
Switch the order around to fix the problem. Also, always reset the line
even if the user doesn't provide a callback.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Remove parts of the documentation for the nrf9280pdk board
that were copy-pasted and added by mistake.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Use the RTIO work queue to fake the i2c submit calls for drivers which
haven't yet implemented the API. Applications can change the size of
the work queue pool depending on how much traffic they have on the buses.
Signed-off-by: Yuval Peress <peress@google.com>
Fixed build warnings of ADC for MAX32662 and MAX32672 SoCs on
hal_adi size, this commit fetches it.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Right now "lp5562_led_blink" unconditionally find and assign a engine
that is not executing at the moment. This is an issue, if 3 "led" are
already using an engine. That is a call to "lp5562_led_blink" could
terminate with error, even if the "led" is already using an engine.
This commit fixes this issue by adding a check to see if engine is
linked and reuse it, otherwise assign a free engine.
Signed-off-by: Anuj Pathak <anuj@croxel.com>
Remove the toolchain_ld_<base|baremetal|cpp> macro as all the macro
handling is now done through the use of linker properties.
Keep support for calling the old macros for out of tree toolchains
which have not been updated to the new property approach.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move linker flag setting from toolchain_ld_baremetal() to linker flag
properties as to follow the principle used in previos commits and from
PR#24851.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Transition the linker flag for the toolchain_ld_base and
toolchain_ld_cpp macros to linker flag properties.
This work follows the toolchain abstraction started in PR#24851.
toolchain_ld_base() was intended for base linker flags, but has slowly
become a 'set-any-linker-flag-here' and thus having several
`if(<check>)` or `<func>_ifdef(<check> ...)`.
Move the check to the top-level Zephyr CMakeLists.txt file, so that it
becomes cleaner which part is responsible for setting a value, and then
move the actual value (the linker flag) definition to the linker flag
property location.
It also helps adding support for new linkers, as it becomes clearer
which linker flags Zephyr always expects, for example `base` and
`cpp_base`, as well as those settings which are targeting for a given
purpose, such as linker sort alignment.
It also makes it clearer when those are used, for example in top-level
CMakeLists.txt with CONFIG_LINKER_SORT_BY_ALIGNMENT compared to this
information being buried in a linker support macro.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To ease the use of linker flag properties and to simplify the use of
generator expression then an optional PROPERTY argument has been added
to the zephyr_link_libraries() function.
This means a call such as:
zephyr_link_libraries($<TARGET_PROPERTY:linker,<property-name>)
can instead be simplified to:
zephyr_link_libraries(PROPERTY <property-name>)
Thus making intention clearer and keeping the complexity and minimizes
the risk of typos when writing generator expressions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The selection of the runtime library when using LLVM has already been
done in llvm/target.cmake and passed to the toolchain_ld_base() function
through the global TOOLCHAIN_LD_FLAGS setting.
The only reason this haven't been noticed is because of CMake's built-in
symbol de-duplication feature.
Remove the redundant runtime library handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The support of PROPERTY_LINKER_SCRIPT_DEFINES has been broken since
the transition to CMake in 12f8f76165.
The intention was probably to allow users / projects to adjust
PROPERTY_LINKER_SCRIPT_DEFINES by setting a CMake cache variable.
The implementation tests for the CMake variable (local scope or cache)
PROPERTY_LINKER_SCRIPT_DEFINES, but it never uses such CMake variable.
Instead it uses a CMake global property named
PROPERTY_LINKER_SCRIPT_DEFINES. CMake variables and CMake global
properties are two very different things, and therefore the current
implementation has never worked. The fact that no one has never noticed
this flaw, means that the feature has never been used as intended.
Simplify the code by removing the use of the global CMake property and
instead set the value of the property on the linker script
pre-processing invocation.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The macro `toolchain_cc_nostdinc` were made obsolete with PR#24851 and
are no longer invoked.
Remove the macro implementations.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Commit 282f77e732f0a4bc859f559bc5a748f953a8140c removed the only place
defining LIBC_INCLUDE_DIR. Remove the corresponding use of
LIBC_INCLUDE_DIR from newlib/CMakeLists.txt as this setting is no longer
being defined anywhere.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
`explorir_m_uart_flush_until_end` terminates immediately if the read
variable is initially equal to `EXPLORIR_M_MAX_RESPONSE_DELAY` and
`uart_poll_in` does not read anything.
Fix this by only checking the read variable if `uart_poll_in` reads a char.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Commit 87f68b4dfe ("arm64: linker: move data section between rodata
and bss") moved .data up a little too far. Keep app_smem in front of it
otherwise user memory partitions end up in general .data with no user
permissions.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Ensure that leading zeros are present in the milliseconds field,
otherwise a milliseconds count of 35 will appear as x.35, i.e. 350
milliseconds. With this fix, it will appear as x.035.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This patch adds bindesc support for the build version values for the
kernel and application - BUILD_VERSION and APP_BUILD_VERSION.
The kernel's BUILD_VERSION can be overridden at build time.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit updates the board documentation to match the I2C1 default
peripheral mapping in rpi_pico-pinctrl.dtsi.
Signed-off-by: Thomas Keller <t.tschaler@gmail.com>
The initialization of the UARTE is attempting to handle potential
improper handover from the bootloader. This handling is additional
complexity which should be fixed in the bootloader or whatever
component is failing to deinit the UART properly.
This commit removes the handling of improper handover from the
bootloader, while additionally clearing the ERROR flag when suspending
the UARTE component.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add default memory partitioning for the nRF53 and nRF91 series devices.
As these partitions refer to TF-M and the TF-M layouts cannot be
modified, use the partitioning scheme from TF-M.
Signed-off-by: Jordan Yates <jordan@embeint.com>
