This allows for armv8m.baseline cores to rely on BASEPRI based interrupt
masking and share the same code as v7m and v8m.mainline.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Armv8-m baseline support various instruction carrying exclusive-monitor and
acquire-release semantic. By adding this guard we let armv8-m.baseline
fall-back to arch defined or compiler built-in support for atomic
operations.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
The experimental status of the PPP L2 is long overdue so
it can be removed as the component is working fine.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Z_LOG_EVAL returns 1 for non-zero log level so if LOG_LEVEL was 0
with intention to disable logs in the current module Z_LOG_EVAL was
jumping to the second option and was applying default logging level.
Since LOG_LEVEL set to 0 should also lead to evaluation of LOG_LEVEL
COND_CODE_0 is added.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Z_LOG_EVAL was used in place where COND_CODE_1 was a much
better fit. Z_LOG_EVAL gave the same result but it was not
intended to be used here.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
log_filter_set() is defined to return the actual level that was set by the
call. In case runtime filtering is disabled, this is always the compiled-in
log level, not the level passed by the user.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Run this test on lpuart10 with internal loopback enabled.
Use DTCM region for this test because in some local
variables are used for dma buffer which requires
non-cacheable
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Assign DMA channels/sources for all LPUARTs exist on the
board so that async APIs can be used for all instances
when enabled.
Because LPUART 1 & 9, LPUART 2 & 10 share the same DMA
sources for TX and RX, be aware when using async APIs
for those instances.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Add "st,stm32-flash-controller" as compatible for STM32H7 so that
what is defined for STM32 in general is also defined for STM32H7.
Already most of the other STM32 versions have this addition.
Also removed the specific STM32H7 flag check in
/flash/driver/Kconfig.stm32.
Signed-off-by: Stefan Petersen <spe@ciellt.se>
Updates Ethernet PHY devicetree bindings to be more consistent with
Linux by using the standard `reg` property for the PHY address instead
of a custom `address` property. As a result, MDIO controller bindings
now require standard `#address-cells` and `#size-cells` properties.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Some Ethernet PHYs used the devicetree node name `phy`, while others
used `ethernet-phy`. Be consistent and use `ethernet-phy` throughout.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
For all STM32 ADC that use common sampling times, there is a check made to
ensure that all channels of a sequence use the same sampling time.
The value was not reset between reads, resulting in error if two
consecutive sequences used different values.
This commit adds a reset of this value once read is done.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add the bt_audio_codec_cfg_set_octets_per_frame function
to set or add the octets per frame field in the
codec configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The number of IRQ first level bits is not necessarily 8 bits
now, so use `CONFIG_1ST_LEVEL_INTERRUPT_BITS` instead of
hardcoded value.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Split the bt_audio_codec_meta_get functions to cfg and cap
variants. This provides a more explicit API where users
do not need to dereference their cfg/cap structs in order
to use this functions.
Furthermore this will also make the get functions more
similar to the upcoming set functions, where the set functions
will require the use of the cfg and cap structs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Provide the soc configuration for sdmmc1 and sdmmc2 controllers.
This includes registers address, clocks, resets and interrupt line
details.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The firmware on these devices seems to have a bug that can cause reordering
of received packets. This can lead to new GATT requests being received
before the acknowledgement of the previous GATT response, accompanied by
log messages like the following:
<wrn> bt_att: bt_att_recv: Ignoring unexpected request
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
* In Zephyr:
* The HW models now include N fake timers, and N
bst timers.
The embedded code needs to target the one for its
CPU specifically.
* Update the HW models module to
f4595802d32d103718bf50b3d390b7a450895843
Including the following:
* f459580 TEMP & ECB: Fix INTEN sideeffect prototypes
* 50c2abe nrfx_common: Fix build error with clang
* 5f0ae29 FICR: Add nrf53 variants
* 82ee9bd DPPI: On initialization, set all registers to their reset value
* 1472c34 NVMC & UICR: Readied for nrf53
* f425c08 NVMC & UICR: Refactor
* 3a4cfc2 RADIO: Parametrize ED_RSSIOFFS
* a20e9fc nrfx_get_irq_number() Add missing CCM peripheral for nrf5340net
* c199715 DPPI: Bugfix
* 93806ac Zephyr cmake: Align with nrf53 board rename
* 51f26a3 VREQCTRL: Add register stub and definitions for nrf53
* 802e0cf RADIO: Switch to level interrupts, readied for nrf53
* 49bcea2 Templates: Added shortcut check & event signaling version for s
* a880cd6 Template: Move static out of signal handler definition
* 709f82b TEMP: Switched to level interrupts, readied for nrf53
* 6ef0069 AES_CCM: Switched to level interrupts, readied for nrf53
* eaa89da RNG: Use common templates
* 75a6cb4 AAR: Switched to level interrupts, readied for nrf53
* fbf58f3 AES_ECB: Switched to level interrupts, readied for nrf53
* d084647 RNG: Bugfix in STOP subscription
* 8007318 Templates: Added template code for the most common models logic
* bab6a54 int ctrl: Added new API
* daaaaa0 config: Fix nrf53 Net core EGU instance HAL mapping
* 54570a0 nrf5340 RTC int mapping fix
* 043af26 nrfx_common: Provide nrfx_get_irq_number() for 5340 cores
* ecd7b9b SWI: Add SWI pseudo peripheral
* a70c73b CLOCK: Add missing TASK sideeffecting prototypes, and fix typo
* 56c7581 nrf5340: Split HAL files in net and app sets
* 3892d3e Add API to get the MCUs/domains names
* 8f485bc RADIO: Prevent clang build warning
* 5aac1c2 hal: Build weak version of the HAL for the 53 series also
* f18422d standalone nrfx_config: Provide needed definitions for nrf53
* 4015d5a nrfx_glue_bsim: Provide 2 trivial definitions for standalone bu
* 4af80d5 cmsis stubs: Provide trivial macro to replace ISB
* b6c2769 cmsis replacements: Fix for other Zephyr bsim targets
* 8316930 zephyr CMakefile: Set HAL version based on Kconfig
* 4404106 RNG: Rename functions to match new naming convention
* a3dbb38 RTC: Rename functions to match new naming convention
* 886dc73 CLOCK: Rename functions to match new naming convention
* bcb2b99 EGU: Rename functions to match new naming convention
* 50af67e TIMER: Rename functions to match new naming convention
* 8120224 CLOCK/POWER/RESET: Add DPPI connections, generalize to N instan
* 450337c RTC: Add DPPI connection, nrf53 support and new functionality
* 2918ce6 DPPI common subscription: Minor API change
* ec1c2a7 TIMER: Add DPPI connection, nrf53 support and functionality
* e6f9860 EGU: Add DPPI connection, nrf53 support and generalize
* c8a4368 bst_ticker: Generalize to N instances
* 093deee fake timer: Generalize to N instances
* 302da8d DPPI: Typo fix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Take in a minor fix necessary to run 15.4 on the
incoming simulated nrf53 targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a new kconfig option to be able to pass extra images to the
native simulator build.
So one can, for ex., use one application build to produce one core image,
and at the same time have it produce the final link with the native
simulator runner and the other MCU images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The Zephyr build leaves all kconfig options as absolute symbols
in the image. This need to be localized, otherwise they will
appear as duplicates with other Zephyr images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The test is for intc_plic only, so move them into the
intc_plic folder.
Also cleaned up the testcase.yaml a bit while I'm at it
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
mps2_an385 was excluded from networking tests, therefore can no longer
be used as an integration platform. Replace it with qemu_x86.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The platform is known for having unstable system timer with networking
enabled (see https://github.com/zephyrproject-rtos/zephyr/issues/48608)
causing occasional failures of time-sensitive networking testsuties
(TLS, now DHCPv6). Instead of excluding the platform on per-test basis,
just exclude the platform from networking testing globally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds a function k_object_is_valid() to check if a kernel
object exists, of certain type, and has been initialized.
This replaces the same (or very similar) code that has been
copied from kernel into the network subsystem.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The serial_test.c driver uses size_t to store read_size,
which becomes a 64-bit type when built for 64-bit
architectures. This is incompatible with the print
format %d which is 32-bit. Updated to %zd
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Many boards do not build properly if UART_ASYNC_API
is enabled, which is causing an overly large list
of targets to exclude for the
build_all.modem.modem_cellular.build test suite.
This commit instead specifies 4 emulated boards, two
of 32-bit, two of 64-bit instead.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This commit moves the dependency management between the
RING_BUFFER and UART_ASYNC_API or UART_INTERRUPT_DRIVEN
options to the Kconfig Kconfig.test.
If either UART API options listed are selected, the
RING_BUFFER option must be selected. This is now handled
automatically by Kconfig instead of causing a build
assert.
The asserts where added with this PR #59880, and are
removed in this commit.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This commit fixes an error where the irq_isr callback is set
to an undefined variable instead of NULL.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Some dependencies where missing from the build_all test
for the modem_cellular.c driver. These have been added.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Describe the code sample using zephyr:code-sample directive to help
with making it easier to find from API reference.
Also cross-referenced main bindesc page from the sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The west bindesc command currently crashes when no subcommand is
given. This is because the subcommand was not marked as required.
This commit fixes the issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Improved the README.md of the hello_bindesc sample by adding a
note about non existing bin files and referencing the relevant
parts of the documentation.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Some of the runners in the tree have been adding their own,
class-specific versions of a switch to instruct the runner to reset or
not the device after flashing.
In order to better support multi-image builds that require more than one
flash operation, introduce a new --reset,--no-reset command-line
parameter that is part of the RunnerCaps so taht this functionality can
be accessed in a standardized manner.
Implementations for the new parameter are provided for the runner
classes that were already configurable in this regard.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Values are specified in the datasheet(page 30, table 18).
Values match with values defined in lsm6dso-common.yaml
Signed-off-by: Jeroen Reeskamp <jeroen.reeskamp@vention.nl>
