Following changes in #64978, align CPU_HAS_xCACHE symbols with
the CMSIS feature definitions in the device headers so that
both have the same value.
Fixes#66147
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Fixes an issue with the register addresses which was caused by a
missing `ranges;` option for the power peripheral
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Mute the function declaration warning, the compiler was emitting when
compiling the esp32 Wi-Fi driver with IPv4 disabled. The
net_dhcpv4_start() function was visible during compile time, even when
IPv4 was disabled.
Signed-off-by: Marc Lasch <mlasch@mailbox.org>
The 62833 added a regression at SAM ethernet drivers which always fail
to initialize due to a wrong switch case implementation and without
review from maintainer. This add more information and fix the issue.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
A race condition was possible at QEMUHandler which didn't wait for
its harness to complete causing false negatives and test suite
retries, for example when the console harness has got rather
long output from a test application to check for patterns.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Some SoC have missing feature selections in their Kconfig.
Some others are missing includes of CMSIS-Core headers.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Caches are optional on cortex-m7, having CPU_HAS_*CACHE in CPU_CORTEX_M7
definition renders them mandatory.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This changes remove extraneous includes causing issues with cycles in
includes subsequently having code requiring definitions from CMSIS
while it’s configuration hasn’t completed yet.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This change adds checks to validate consistency between Zephyr’s Kconfig
settings and cmsis configuration defined in SiP’s sdk provided headers.
This change also introduces a config to enable cmsis’ own checks which
emits warnings if a parameter relies on auto-populated default values.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Kconfig parameters, header’s default & silicon vendor’s SDK configuration
for CMSIS Core, must be consistent. Depending on the inclusion order of
the headers, this is currently not always the case.
This change introduces consistency checks & enusers defaults match their
Kconfig settings.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Use the returned reason from the secure fault handle function.
I see no reason why this was ignored, and it is used in the hardfault
handler.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch just adds some comments and asserts to clarify the testlibs
att read code.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This reformats some code on main branch that was not clang formated. The
syntax is changed from initializer list to multiple statements because
there is a conflict in formating requirements between clang format and
checkpatch.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add the chosen dtcm memory region
for mimxrt1010_evk and mimxrt1015_evk.
To be consistent with other rt10xx platforms.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When testing k_busy_wait(100), don't require that at least 100µs of CPU
time be consumed by the thread itself; some of that time may be used
elsewhere in the system. Instead, just make sure that at least 80µs is
accounted to the thread and allow 20µs to get used elsewhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace open-coded time conversion with the macro which as that will
usually use a constant divide or multiply.
Signed-off-by: Keith Packard <keithp@keithp.com>
pthread_sigmask() is required by the POSIX_THREADS_BASE
Option Group as detailed in Section E.1 of IEEE-1003.1-2017.
The POSIX_THREADS_BASE Option Group is required for PSE51,
PSE52, PSE53, and PSE54 conformance, and is otherwise mandatory
for any POSIX conforming system as per Section A.2.1.3 of
IEEE-1003-1.2017.
Currently, setting a pthread signal mask has no effect.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
When CONFIG_POSIX_SIGNAL=n, default CONFIG_POSIX_RTSIG_MAX to
0 so that the `sigset_t` type can be defined.
Also define RTSIG_MAX.
This allows native_sim and other platforms to build without
error.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
MIN() has been defined in sys/util.h for a long time. It doesn't
make sense to separately define a lowercase version.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The range and sensitivity tables don't match the datasheet
or the DTS binding file. This changes the array lookup tables
to match the datasheet and binding file.
Signed-off-by: Mike Voytovich <mike@rokkresearch.com>
The driver has some non trivial macro setup, add another two test cases
so those gets build tested as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a poll and scan mode for the driver. If any of these are set, the
driver does not use the GPIO interrupts to detect when the matrix has to
switch to polling mode. Instead, it keeps polling it all the time,
either by enabling all the columns and poll the rows for activity, or
just keep scanning all the time.
Poll mode is useful if the specific SoC used does not support GPIO
interrupt on all the row GPIOs at the same time, scan mode if it does
not even support selecting all the columns at the same time.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Tweak the polling mode so that the driver never exit polling mode if
poll_timeout_ms is 0. This is useful if the specific driver does not
support idle mode.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The state variable to tracking the unstable state of a key is currently
being cleared based on the bit value, which means that on release it's
not being cleared at all. Fix that by clearing using the bit mask
instead.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
scan_clk_cycle is used to store values from k_cycle_get_32(), it very
much needs to be a uint32_t.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Implements sync established and sync lost BTP events.
This was affecting GAP/PADV/PASE/BV-01-C test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows for more tuning regarding Periodic Advertising Sync
behavior.
Required by GAP/PADV/PASE/BV-01-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Add information about the IPv4 multicast IP_ADD_MEMBERSHIP and
IP_DROP_MEMBERSHIP socket options.
Add information about the IPv6 multicast IPV6_ADD_MEMBERSHIP and
IPV6_DROP_MEMBERSHIP socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Commit 40c2e08e82 ("xcc/cmake: don't discard stderr; don't (ever!) use
ERROR_QUIET") fixed xcc but the corresponding code is duplicated. Fix
the duplicates too.
See that commit for the issue description, longer commit message and
rationale.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
