The IPC enum definition and WAIT_FOR macro are useful outside of
the board smoke tests for intel_adsp. They can be commonly used
by other board tests for a variety of peripherals that require
DSP and Host interaction (using cavstool).
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Enable the messaging unit for NXP i.MX8M Plus EVK boards. This is a
necessary requirement to be able to run rpmsg examples later.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Introduce set/get SO_RCVBUF option using the setsockopt
function. In addition, use the rcvbuf value to set the
tcp recv window.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
- update stm32l4 to cube version V1.17.1
- update stm32wb to cube version V1.13.2 (including hci lib)
- update stm32f4 to cube version V1.27.0
- update stm32u5 to cube version V1.1.0
- update stm32g4 to cube version V1.5.0
- update stm32h7 to cube version V1.10.0
- update stm32f7 to cube version V1.16.2
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add myself to the CODEOWNERS for samples/subsys/logging/syst
to make checkpatch happy, and to get notifications of changes
in the sample.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds to sample.yaml to build for MIPI Sys-T catalog message
support.
Note that the current implementation of emitting Sys-T
catalog messages does not support 64-bit and architectures
having additional alignment requirements. So only allow qemu_x86
and mps2_an385 at the moment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds qemu_x86_64 and qemu_cortex_a53 to make sure 64-bit
support for Sys-T is not broken in the future.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compilers often combine strings to conserve space, if one string is
a perfect substring of another one towards the end. So add another
string in the test to make sure sys-t with catalog messages is still
working correctly under this scenario.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MIPI Sys-T catalog messages are similar to dictionary logging
where an ID is emitted instead of the format string. This allows
the format strings to be removed from the final binary to save
a few bytes. This adds the necessary bits to determine to emit
catalog messages when appropriate.
Note that this implementation copies the argument list as-is
with string arguments stitched together since the format strings
are assumed to have been removed and they cannot be examined
to properly convert the argument lists into catalog message
payloads. Because of this, various build asserts are there to
avoid building for configurations where they are known not to
work.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new CONFIG_LOG2_MSG_PKG_ALWAYS_ADD_RO_STRING_IDXS
kconfig. If enabled, the log message packages will always have
the indexes of read-only string arguments appended to the package.
This will be selected only by those backends requiring it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the ability to the dictionary logging database
generation script to output MIPI Sys-T collateral in XML.
This will allow usage of catalog logging under Sys-T, which
is similar to dictionary logging.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the script to allow output format to be specified.
Currently, only JSON is support. This will allow supporting
other formats in the future.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the database generation to actually extracting
individual strings instead of stuffing the whole binary sections
into the database. This allows the generation script to be
extended to accommodate more output formats.
Note that if CONFIG_LOG2_FMT_SECTION is enabled, the format
strings are in log_strings_sections, and also have associated
debug symbols in DWARF. So there is no need to manually
extract them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compilers often combine strings to conserve space, if one string is
a perfect substring of another one towards the end. So add another
string in the test to make sure dictionary logging is still working
correctly under this scenario.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The MIPI Sys-T library can now take a format string with a variable
argument list so there is no need for the temporary buffer anymore.
This saves some stack space in v1 immediate mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With the new structure of the cbpprintf packages, the Python
parser needs to be updated to skip extra bytes before reaching
the string table.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Whenever we disable Bluetooth we need to clear the supported commands
array, because there are several functions that check whether a
controller is ready to receive a particular command by testing a bit on
that bitfield.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to get rid of the duplication of the code that we had until now
in the tree, consolidate the handling of multiple calls to
bt_hci_cmd_send_sync(BT_HCI_OP_LE_RAND, ...) in a single location,
namely in hci_core.
This allows all of the users of this HCI command to use a single
implementation of the iterated sending of the HCI command to fill a
buffer with random bytes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
bt_hci_cmd_send_sync() requires the caller to unref the buffer that is
sent back as a response. Add the missing call to net_buf_unref()
accordingly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the HCI entropy device is a software construct that is able to
provide entropy bytes by retrieving them from a Bluetooth Controller,
generalize it by moving it to the Nordic common DTS code. Additionally
move the chosen nodes from the nRF5340 DK board files to the SoC ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Algorithm was converting uptime to nanoseconds which can easily
lead to overflows. Changed algorithm to use milliseconds and
nanoseconds for remainder only.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Decision about whether test should be considered as ztest should be made
after detection ztest testcase - not after detection ztest test suite.
Fixes: #44397
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Correct eSPI flash macro so it not always results in zero,
leading to eSPI flash read operation in all cases:
Read, write, erase.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The function npcx_clock_get_sleep_ticks is currently guarded by
CONFIG_PM && CONFIG_NPCX_PM_TRACE. The other codes guarded by
CONFIG_NPCX_PM_TRACE is used to trace and will print a lot of messages.
The user who wants to use npcx_clock_get_sleep_ticks has to enable this
flag and get a lot of console spam. This commit removes the guard
CONFIG_NPCX_PM_TRACE and makes this function is available when
CONFIG_PM is defined.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The commit splits the main mcumgr Kconfigs into primary Kconfig
that collect general mcumgr options for Zephyr (Zephyr specific
commands, transports, and so on), into lib/Kconfig
that collects library options and command groups' Kconfigs.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
LWM2M Client Sample with DTLS enabled fails because TLS_HOSTNAME is set
but MBEDTLS_X509_CRT_PARSE_C is disabled which leads to error
'net_lwm2m_engine: Failed to set TLS_HOSTNAME option: 109'
Add new field hostname_verify to let the application decide if hostname
should be checked.
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
When connect() is called on a TCP socket, tcp_in() is called with a NULL
packet to start establishing a connection. That in turn leads to a SYN
packet being produced which, depending on the Ethernet driver, may
result in a synchronous transmit of that packet. After that, the
connect() implementation, which at this point is executing
net_tcp_connect() starts waiting to take a semaphore until the
connection timeout is reached. However, if the transmit of the SYN
packet results in a RST packet being returned from the connection
destination (due to there being no listening socket) very quickly on a
local network, the device driver may deliver an interrupt which can
cause the receive path of the network stack to run, resulting in the
tcp_in() of the RST packet via the network RX thread. That can cause
tcp_conn_unref() to be called before the connecting thread has gotten
to the point of acquiring (or failing to) the semaphore, which results
in a deinitialized semaphore being accessed.
This commit fixes the possible race condition by ensuring that the
connection lock mutex is held until after the connection state moves
to "in connect."
Fixes#44186
Signed-off-by: Berend Ozceri <berend@recogni.com>
Test doesn't do any check on prescalers. Remove references and
existing user: wx_clear_clocks overlay.
Proceed to new factorization when possible.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since they don't have impact on sysclock src configuration,
remove LSI/E clocks from clear clocks overlays.
This enables the possibility to factorize wl and wb clear clocks overlays
and brings some use cases factorizations as well.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Revise test cases naming:
- Replace _<series>_ by a .<series>. field in test cases naming
- Rename clear_clocks_msi.overlay to clear_msi.overlay
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix selection of boards used:
- Remove superfluous/redundant configs
- Adapt to boards available on ST test bench
- fix typos
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To be functional, harness_config require a `harness: ztest` property,
add it.
Additionally, provide a comment to explain motivation behind this fixture.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Before introducing a new test for peripheral clocks,
rename existing stm32h7 test section by stm32h7_core.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This driver exectue connecting the shared irq one time for
every status "okay" vcmp nodes, then it will show enable
the same irq multiple times when build.
So I check whether the irq is enabled or not, if yes,
we needn't to enable again. And we will figure out the
triggered channel in vcmp_it8xxx2_isr().
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Added support for 8 MB MPU regions for SRAM sizes between 4 and 8 MB,
and 16 MB MPU regions for SRAM sizes between 8 and 16 MB.
Signed-off-by: Johan Öhman <johan.ohman@softube.com>
