Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MD bit was set based on whether a memq link's next pointer
being NULL, instead the check should be that the memq has
more elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in porting slave latency, slave latency
enabled was not used, cause slave latency to be applied
before first packet being acknowledged by the master.
Regression in commit 5dff214d57 ("Bluetooth: controller:
split: Fix missing slave latency impl.").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The CONFIG_* prefix was missing, making the #ifdef always false.
Found with a script (CONFIG_BT_SETTINGS_USE_PRINTK was unused).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix GATT buffer leak when bt_att_send returns error the allocated
buffer is never freed. Discovered case where the link was disconnected
during the function call, so when GATT checkd the link was still
connected, but ATT checkd the link was disconnected.
Fixes: #19889
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Key overwrite feature allows to overwrite old pairing key
records when key storage is full and a new pairing request occurs,
or new keys are distributed. If enabled when key storage is full and
a keys storage slot is requested, the oldest keys added will be
removed. So new devices can be paired with no limitations and no need
to determine, which devices should be unpaired to free key storage
space explicitly in application. To enable the feature set
CONFIG_BT_KEYS_OVERWRITE_OLDEST=y.
Oldest keys are determined by minimum value of up-counting aging
counter. If you set CONFIG_BT_KEYS_SAVE_AGING_COUNTER_ON_PAIRING=y
aging counter values will be updated each time the secure connection
is established. This might increase flash wear out if at least two
secure connections are established and shut down periodically. When
the option disabled aging counter is still updated on each new secure
connection, but not stored to flash.
Signed-off-by: Sergiy Nikolayenko <sergiy_nikolayenko@jabil.com>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The 16-bit format group addresses will be stored,
but we don't store (or restore) the virtual label UUIDs,
i.e. after a power cycle the 16-bit group addresses
would be meaningless.
Fixes#19342
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Add public API function to get the connection handle of the connection.
The connection handle is needed by applications that intend to send
vendor specific commands for a given connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add pre-empt timer stop when a prepare is executed so that
when the pipeline has another event queued, the firing of
the pre-empt timer does not pre-empt the just executed
prepare.
Relates to #19685.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly calculated ticks slots for a connection on
connection update. The reservation incorrectly included the
prepare offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in bt_gatt_attr_next when given an attribute that has static
allocation. The handle is then 0 and the function would always return
the attribute with handle 1.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue when wanting to use whitelist in bluetooth
applications that does not have CONFIG_BT_CENTRAL defined.
These functions are useful even for broadcaster and observer roles.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add public API function in GATT to check if a specific connection has
subscribed to the given attribute.
Without this function the application has to keep track of which
connections has subscribed using the callbacks from BT_GATT_CCC_MANAGED
since the cfg_changed callback of the CCC doesn't carry connection
context.
The other alternative is for the application to parse the information
in the struct _bt_gatt_ccc object. Although this object has structure
information available to the application the structure is marked as
internal, so the application shouldn't rely on this definition.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for persisted Service Changed data, to fix the case of a
paired device not reconnecting before a reboot and thus not receiving
SC indication. It also enables support for GATT database being changed
during a firmware update.
Move Service Changed data outside of the CCC struct and make it
persistent by adding support for a bt/sc/... setting.
Signed-off-by: François Delawarde <fnde@oticon.com>
The Service Changed characteristic support should also work when the
GATT database has been modified after reboot (firmware update scenario)
This commit introduces a BT_GATT_SERVICE_CHANGED config option that is
independent from BT_GATT_CACHING and BT_GATT_DYNAMIC_DB.
Signed-off-by: François Delawarde <fnde@oticon.com>
Rx nodes are reserved during control procedures for
generation of HCI event on completion. Fix the allocation
and reservation in the form of a linked list per connection
context. Worst case, this list will hold one rx node for
overlapping non-instant control procedure (Data Length
Update) plus two rx node for control procedure with instant
(PHY update with Data Length Update support).
Fixes#19198.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to distinguish between connection-related events
that are generated by the controller and others genrated by LL control
procedures, introduce a new class for LLCP.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Cache the result of calling hci_get_class() to avoid repeatedly invoking
it on the same data. In order to cache it we take advantage of the fact
that both radio_pdu_node_rx_hdr and node_rx_hdr are not packed
structures and they currently have a spare padding byte (between type
and handle).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Hide the details of obtaining a pointer to the PDU data from a node_rx
structure to simplify the code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Call LLL reset functions when calling ll_reset to avoid carrying LLL
state across HCI resets. Respective functions already exist in LLL but
had not been called from anywhere.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Unless explicitly blacklisted, the Proxy node will forward all messages
for the ALL_NODES address to the GATT proxy client.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Relates to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ULL High and ULL Low are not at same execution priority
level, it is not necessary to disable ULL Low execution when
updating ticker using stop and start. Also, ULL Low need not
be disable inside Radio Events. This commit corrects some of
the conditional compiles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig conditional include of Minimum Channels Used
and Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker previous slot value with elapsed ticks value from
the time stopped ticker has expired. When a ticker is
stopped, if it was in its reserved time space, then the
currently occupied slot (was set to 0) should be the amount
of time that has elapsed in the expired and stopped ticker's
reserved time space and beyond until the stop.
This is required to ensure that any other new ticker does
not get scheduled over the stopped ticker's reserved time
space.
Fixes#19515.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Creates macros for determining model message lengths based on opcode,
payload length and MIC size. Also adds macro wrapping
NET_BUF_SIMPLE_DEFINE to serve the most common use case.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When running a ticker node as "must expire", the node would invoke the
ticker callback even when programmed with latency. As "must expire" is
intended for scheduled events which are skipped due to collision, and as
such expected by LLL, purposefully skipped events should not generate
"must expire" callbacks.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix ULL implementation that uses conditional compilation by
replacing back to use of #if defined(...) in code accessing
compiled out struct members.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for possible Tx Buffer leak during disconnection when
the buffers are in ULL context and not yet enqueued towards
LLL context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When more than one simultaneous connections are active,
transmitting data packets to peer, a termination causes
host to use the flushed pending number of completed packets
count for other active connections. This is on reception
of HCI disconnection complete event. But the controller has
not yet released any of the pending enqueued Tx buffers
which was happening after the disconnection event was
dispatched to HCI layer.
The fix here is to dispatch the disconnection complete event
from the LLL context after pending Tx buffers have been
flushed and the buffers get returned to Tx pool in the ULL
context. This way buffers are in the Tx pool before host
get to process the disconnection complete event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for possible Tx Buffer leak during disconnection when
the buffers are in HCI thread context and not yet demux-ed
and enqueued towards LLL context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the mayfly scheduling of the Tx buffer flushing on
connection termination to be immediate (not to tailchain).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Uses net_buf_simple_clone to access the sdu of an unsegmented app packet
for re-encryption.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Local messages are already enqueued for the LPN in the tx path, and
don't have to be added again in the rx path.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Re-encrypts single-segment application messages when the network seqnum
has changed, to avoid encrypting messages with different seqnums in
network and transport. This operation is only required for unsegmented
messages, as segmented messages don't need to use the same seqnum in
network.
Reinstates the special adv data for friend messages to store the app key
index.
Fixes#19265.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Provides a utility function for getting an application key given a
subnet and an app ID. Primary use-case in friendship re-encryption.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Provides utility function for parsing network headers outside of the
network layer. The primary intended use-case is friendship.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Check if the encryption procedure is in progress when receiving
rejection for the procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue in the handling of LL_REJECT_EXT_IND packets, this would look
at the procedures that are enqueued, and not the procedure that was
being rejected. This meant that although a reject was received for the
encryption procedure, the handling for a different control procedure was
run.
This would result in the link being terminated as control procedure
timer would time out for the encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When aborting radio event, there is a possibility that the
packet timer would start the radio while the packet timer
is being reset. Hence, perform a second radio state disable
with packet timers uninitialised.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing radio status and configurations reset on radio
event abort. This caused under race conditions the radio
being put into active state after being aborted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect ticker/mayfly user id used in scheduling the
abort of a radio event. Incorrect use of thread context as
the caller caused the abort function to be scheduled from
thread context while being called from ULL high context
level in reality. This could cause corruption of mayfly
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When flash driver requests abort of radio event in unreserved
time space, resume radio events in the pipeline were not
flushed. These resumed events caused flash driver to assert
on the check whether radio was in use.
Fixed by flushing the pipeline of all radio events, resume
and also those events in pipeline with pre-empt timeout
being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple simultaneous peripheral connections are
supported, restarting connectable advertising by host on
peripheral connection establishment failed in controller.
This prevented establishing new connections while first
connection was active.
The failure was caused by a bug in the way controller was
using quota for Rx PDU buffers. As the quota count was
release before the connection complete event rx PDU buffer
being released, the Rx PDUs needed to reserve for
connection complete event for new connectable advertising
was not available. This caused the connectable advertising
enable to fail.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in ATT reset handling, not releasing queued notification
buffers when the connection is terminated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use entropy driver directly in bt_rand instead of stitching together
calls to sys_rand32_get to improve efficiency. The use of
sys_rand32_get could also leak timestamps into keys.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Immediate logging is not compatible with the software-based controller
due to the additional ISR latency that it introduces. Ensure that
deferred logging is in use whenever using the software-based LL.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handle case where:
- Peripheral sends security request after master has sent pairing
request or started encryption procedure.
This packet can be ignored, as long as the slave has not already
responded with pairing response.
- Central wants to start security after peripheral initiated security
request, return error code busy in this case
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move initiating security functionality and LTK requesting into the SMP
module so that SMP can track when the connection is in the encryption
process
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the bt_smp_keys_check function above all usage of the function
in order to avoid prototype declaration when making the function static.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix calling bt_hex and bt_addr_le_str multiple times in the same logging
call could result in string overwritten since log_strdup is not
guaranteed to duplicate the string buffer in all logging configurations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added to allow vendor specific increase of user operation capacity for
ULL_HIGH, to support queuing additional ticker operations.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enabled use of ticker must_expire feature for ensuring ADV timing
randomization, even when ADV doesn't get air-time. This reduces ADV
collisions. Not active for nRF51 platform for now.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression introduced in refactoring of use of SWI.
Reduced use of SWI cannot be used in combination with
CONFIG_BT_CTLR_LOW_LAT as additional SWI is required
to split ticker WORKER and JOB contexts in order to
disable JOB but keep WORKER enabled.
Regression introduced in commit 78b461ae3e ("Bluetooth:
controller: Refactor use of SWI").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calling indicate or notify on a disconnected connection object would
result in the error code ENOMEM when failing to acquire buffers instead
of the expected return code ENOTCONN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop linking interface libraries against zephyr_interface. This is
cargo cult code that in practice does nothing.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The start timestamp was supposed to signify the starting point of the
clear procedure. The code was incorrectly initializing it to the *end*
point of the procedure.
Fixes#19263
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This file contains redundant definitions of a bunch of nRF IRQ numbers
(not all, however) that only generates confusion, as enumeration values
provided by MDK can be used instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52811 Radio is similar to nRF52840 and exhibits
similar Radio Timings constants. We align the LE Coded
PHY (S2) RX chain delay with that of nRF52840, which,
eventually fixes the TIFS for nRF52811. In nRF52840 we
correct the inline comment only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We have introduced option HAS_HW_NRF_RADIO_BLE_CODED, which
reflects that an nRF SoC has a Radio with LE Coded PHY
capabilities. We now modify all #ifdef expressions for
Coded PHY in the nRF controller port, removing SOC_NRF52840
and adding this new option instead. This allows to build
an nRF controller with Coded PHY support for SOCs other
than nRF52840.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable possibility to configure time a slave will wait until
start of connection parameters update procedure after BT connection
is established.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This moves check_perm code under GAT and make use of it to check if CCC
write permission can be attended by the connection security level or if
it needs to be increased.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add GATT initializer macro for GATT CCC and allow the
BT_GATT_CCC_MANAGED to accept an already initialized CCC user data.
This allows the application to specify the storage location of the CCC
user data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
CCC storaged is no longer declared separetly so check if ccc->cfg
matches with sc_ccc_cfg no longer works so instead use the cfg_changed
callback and match against sc_ccc_cfg_changed.
Fixes#19267
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Relates to commit 76bfea7cf9 ("Bluetooth: controller: Ensure that a
`case` statement is present").
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This makes the identity initialization consistent and actually catches
a few branches where it may not have properly happened.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make it possible to initiate new connections from within the
disconnect callback. This wasn't completely trivial since there was
connection cleanup done through deferred action using the CONN_CLEANUP
flag.
This patch moves the disconnected callbacks to be run after all
cleanup is done. We can't directly do this in the TX thread, since
that's internal, so we instead take advantage of the deferred work
support and do it using the update_work callback. Since the same
cleanup is needed also for BR/EDR connections the work definition is
moved from the LE-specific struct to the generic struct bt_conn.
A valid bt_conn object in disconnected state is a likely indication of
a connection reference leak, so there's a new BT_WARN() for this case
in bt_conn_create_le().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds additional model callback that gets called on node_reset. Will also
erase any user data when this happens.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds user data file in the model settings, allowing each model instance
to store some application specific data without having to reinvent the
settings path encoding for model element/ID combinations. Exposes the
settings_handler interface in the model callback structure and adds a
data store function.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a structure of callbacks for each model instance. This allows for
more flexible model implementations, that can interact with the Mesh
stack without going through the application.
For now, only an init callback is added, replacing the init mechanism in
the foundation models. The init callback does not provide the primary
flag that used to be in the foundation model callbacks, but replaces
this with an inline function in access.h.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When both central and peripheral are supported, one each Rx
node will be needed by connectable advertising and the
initiator to generate connection complete, hence
conditionally set the count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to abstract the use of software interrupts in nRF5
Series.
Also, reduce the number of SWI used when interrupt priority
level configured is same for ULL High and ULL Low contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit completes the refactoring of radio.c, so it
calls abstract functions for PPI handling for LE Coded
PHY (e.g. enable, disable channels, or configure endpoints),
which, then, call the platform-specific functions for PPI
handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h, conditionally, if we
build the controller with support for LE Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make the definitions of LE Coded PHY-specific macros
and inline functions conditional, i.e. only if we
actually build the controller with support for LE
Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors radio.c, so it calls abstract functions
for PPI handling (e.g. enable, disable channels, or configure
endpoints), which, then, call the platform-specific functions
for PPI handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines generic macros for the software interrupt
(SWI) IRQ lines that are used for LLL and ULL LOW interrupts.
This is done for both the cases of the legacy and new (split)
controller architectures. In addition, it abstracts some of
the functionality around software-IRQ signals, to generic
functions, which have platform-specific implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Stores friend queue packets unencrypted, removing any out-of-order
issues caused by seqnum allocation. Also moves as much of the metadata
storage as possible into the packet, allowing us to free up some bytes
of net_buf user data for friend packets.
Fixes#18488
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Makes a define for the seqzero 13-bit mask in transport, and exposes it
in the header for use in the friend module.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
Host shall ignore the unknown ATT PDU that has Command Flag set.
Fixes regression introduced in 3b271b8455.
Fixes: GATT/SR/UNS/BI-02-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit adds an explicit inclusion of toolchain.h from pdu.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by pdu.h;
these being not defined can easily go unnoticed and cause unexpected
behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The bt_mesh_fixed_group_match() function is intended to match the
various well-known group addresses, however it was never updated when
Proxy support was added.
Fixes#19015
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As element addresses are sequential, there's no need for iterating
through the elements to find the one matching a unicast address.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add iterator function to iterate over all connection objects.
Make type a bitmap so that it can be used as a bitmask to select which
conns to receive foreach callback.
Use foreach function internally where possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allows the user to pass a provisioning input complete callback to the
provisioning module, letting the application stop displaying its output
OOB value when the other party finishes their OOB input.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Made BT_HCI_TX_STACK_SIZE configurable and added BT_HCI_ECC_STACK_SIZE.
These changes are necessary to allow vendors to adjust for other
achitectures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework the BT_ASSERT infrastructure with the following changes:
- Transition from LOG() macros to printk()
- Allow the BT_ASSERT() macro to map directly to stancard __ASSERT()
- Allow printing of the assert reason to be disabled
- Switch from k_oops() to k_panic() configurable
There are 2 reasons for using printk() instead of LOG():
- BT_ERR uses deferred logging by default, which is problematic with
ASSERTs
- The __ASSERT() macro in Zephyr uses printk()
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix issue when checking if SMP pairing procedure is allowed to use the
SMP debug keys. This check did not consider the case where the keys
pointer was assigned, but did not contain a valid LTK key.
This resulted in being unable to pair with debug keys without an
existing bond.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix shell build dependencies, subsys/bluetooth/controller is only added
for CONFIG_BT_LL_SW_SPLIT or CONFIG_BT_LL_SW_LEGACY.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The return code of set_random_address is not always handled. This could
lead to connection using the wrong Identity address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove incorrect LL_ASSERT check in Lower Link Layer that
checked for invalid connection handle on reception of PDU.
The assert is not needed as PDUs can be received until the
Upper Link Layer is aware of the acknowledgement of the
terminate ind PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add workaround for advertising data issue in the internal bluetooth
controller. The advertising data must be set after advertising
parameters in order to successfully update the advertising data after
an directed advertiser has been active.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix handling of Rx-ed PDU on termination, do not process
Rx-ed control PDUs and release the PDU buffer back to the
free pool.
Without this fix, Rx-ed control PDU was responded with a
Tx PDU, which did not get acknowledged or released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Endianness bug fix in bt_uuid_create function.
Replaced bt_uuid_create_le with bt_uuid_create which
handles both UUID from air and internal varaiable.
Fixed bug with endianess in case of big endian targets.
Signed-off-by: Akshatha Harishchandra <akhr@oticon.com>
When an opcode doesn't have a handle that doesn't mean it is unknown
just that it will not be handle as it could have been disabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
SMP shall be considered internal TX notify callbacks so they are
allowed to be run from TX thread context like the others.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When CONFIG_BT_GATT_CLIENT is not set att_op_get_type would return
unkown operation instead of properly return the opcode.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since bt_l2cap_create_pdu can return NULL when used under syswq context
the code should always check its result, this also changes the timeout
to have a specific value (RTX maximum timeout) so signalling PDUs still
wait for a buffer to become available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain cases there could be no buffer available which may lead to
NULL being returned by bt_l2cap_create_pdu so instead use
bt_l2cap_create_pdu_timeout to wait with a specific timeout.
Note that this should also ensure the SMP will not be waiting for a
buffer when the remote might have timed out already.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_conn_create_pdu_timeout function which can be used
to provide a timeout when allocating a buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to handle data packet
enqueue being pause on Encryption Request be done early in
the ULL when enqueueing packets towards LLL.
Fixes#18645.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.chettimada@gmail.com>
Rename AUTHENTICATION, to AUTH, since this is a well established short
form of the word.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
A security vulnerability in the Bluetooth BR/EDR Bluetooth Core
specification versions 1.0 through 5.1 has been identified as
CVE-2019-9506. The Bluetooth BR/EDR encryption key negotiation
protocol is vulnerable to packet injection that could allow an
unauthenticated user to decrease the size of the entropy of the
encryption key, potentially causing information disclosure and/or
escalation of privileges via adjacent access. There is not currently
any knowledge of this being exploited.
From Core spec erratum 11838:
A device shall enforce an encryption key with at least 128-bit
equivalent strength for all services that require Security Mode 4,
Level 4. For all other services that require encryption, a device
should enforce an encryption key with at least 56-bit equivalent
strength, irrespective of whether the remote device supports Secure
Simple Pairing.
After encryption has been enabled, the Host should check the
encryption key size using either the HCI_Read_Encryption_Key_Size
command (see [Vol 2] Part E, Section 7.5.7) or a vendor-specific
method.
Fixes#18658
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case sufficient security level wasn't reached the error propagation
was missing, which could lead to incorrect state transitions when
update_sec_level_br() returns. Return true/false and make sure to
abort any further operations in case the update fails.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The storage for the public key is pub_key in hci_core.c.
When the public key event is generated the public key is copied into
this buffer, but the pointer to the event storage of the key is given
in the public key ready callback (bt_smp_pkey_ready).
SMP expects that it is safe to assign a global pointer to this variable.
In smp_init bt_pub_key_get is used to get the pointer to the public key.
In both cases SMP assigns the le_sc_pub_key to the pointer given.
This creates an issue when bt_smp_pkey_ready callback occurs after
smp_init during pairing procedure, SMP will then have a pointer to an
event buffer that has been released and contains invalid data.
Fixes: #18580
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Give the security changed callback when the peripheral initiated
security request and peer attempted to encrypt the connection but no LTK
match was found.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make sure that a new pairing procedure with an existing bond does not
result in a security with weaker security properties.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add option to force the host to initiate pairing procedure even if the
host has encryption keys for the peer.
This option can be used to pair with a bonded peer that has deleted its
bonding information without deleting the keys. If new pairing results
in weaker keys the pairing will be aborted.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add security error to security_changed callback. Call this callback when
security has failed and provide current security level and error.
Reason for failure can be.
- Pairing procedure failed, pairing aborted before link encryption.
- Link encrypt procedure failed
- Link key refresh procedure failed.
Fix missing bt_conn_unref on encryption key refresh with error status.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the pairing procedure in the request phase if no storage is
available for the keys. This avoids the pairing procedure from failing
during the key distribution phase.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Proved the Authentication callback for pairing failed and pairing
complete when BR/EDR SSP is complete.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow SMP debug keys to behave in the same way as normal keys, in order
to debug with encryption and Bluetooth sniffer the exact way it behaves
when not using debug keys.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The period_start timestamp wasn't getting properly initialized in the
case that retransmission was not being used. In the case of
retransmission the timestamp was getting updated in the mod_publish()
delayed work callback. Add a send_start callback and do the
initialization there, since this covers both the retransmission as
well as the no-retransmission cases.
Fixes#17820
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Post Tx pool corruption fix, clean up code and add comments
explaining the use of Tx node next field used to indicate
the Tx node's allocation from Control or Data pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Tx FIFO, queue and pool corruption due to missing
release of link object to Tx link pool and hence missing
reset of the per connection initially allocated Tx link
free pointer.
The bug caused Tx PDUs and associated memory to be lost
leading to missing L2CAP segment transmissions. With lost
control PDU buffers, ULL would stall processing Done events
also leading to controller asserts.
Fixes#18546.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to provide an UUID to bt_gatt_indicate so API user
don't need to hardcode the attribute offset by hand.
Fixes#18572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code for checking space in the Friend queue was faulty in the case
that we receive a message with more segments than the configured Friend
Queue size. This is not an issue for the default configuration but
still a possible one. Move the check for exceeding Friend Queue Size
to the per-LPN function, so that bt_mesh_friend_queue_has_space()
iterates all LPNs before delivering its verdict. This allows us to
return success in case no LPN matched (which is how the code was
intended to work).
Fixes#18522
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
According to Mesh Profile Specification 1.0.1 Figure 5.17, the
unprovisioned device should send its confirmation value after the
provisioner sends theirs. Previously, the confirmation value would be
sent immediately after OOB input complete. Now it first waits for the
input data, then from confirmation from the provisioner before sending
the confirmation.
Fixes: #18178.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Qualification test case MESH/NODE/FRND/FN/BV-08-C requires that we do
not store more messages than the reported Friend Queue size. The
implementation was so far opportunistic and stored more if it could
(it would later discard if necessary to make sure all queues can store
the required amount). The spec also requires the queues to have new
messages overwrite old ones (in the style of a circular buffer), so we
have to keep track of which buffers are part of the same segmented
message (so we discard all buffers belonging to the same message).
To pass the test case, add APIs to check for space in the Friend
queue, and track the number of buffers for each incoming segmented
message.
Fixes#18090
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_trans_resend() function had no users, and had in fact not
even a prototype in a header file. Just remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sent solely to the Friend Queue the send callbacks were not
getting called for unsegmented messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes the dead code when parsing Find Information response since
the index counter can never be zero, instead it checks there are any
attributes found and if there nothing don't proceed with discovering
which was the original intent of the now dead code.
Fixes#18384
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Due to conditional compile path ending in LL_ASSERT(0), the compiler
sees code following the assert as using uninitialized variables.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When the database changes and a client becomes change unware it should
also clear the out of sync flag as the following request should return
an error:
Core Spec 5.1 | Vol 3, Part G, 2.5.2.1 Robust Caching:
'The error response is sent only once after the client becomes
change-unaware, unless the client disconnects or the database changes
again before the client becomes change-aware in which case the error
response shall be sent again.'
Fixes: #18183
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following crash:
ASSERTION FAIL [0] @ ZEPHYR_BASE/subsys/logging/log_core.c:180
argument 2 in log message "%s: Stored CCCs for %s (%s)"
missing log_strdup().
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix issue unable to connect to bonded peer when host resolution is used
either because the controller does not support privacy, or the
controller resolving list was exceeded.
In this case we need to use the RPA from the advertising report
directly, there is a small chance of the peer cycling the RPA here, in
which case the connection might be unsuccessful.
Bug introduced here: 45da629b24Fixes: #18306
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When in Low Power mode an LPN may receive messages sent by nodes other
than its friend during its brief receive window. These messages get
rejected by the transport layer. At some point in the future the LPN
will receive these messages from its friend, however they will have
already been added to the network message cache earlier.
When the transport layer rejects a message due to it being received from
a non-friend node while in Low Power mode it must be removed from the
network message cache so that it can be correctly received from its
friend in the future.
Fixes#17809
Signed-off-by: Rich Barlow <rich@bennellick.com>
The commit 1c7b668804 tried to fix
resending segments to the GATT bearer, however it got the buffer
refernce counting wrong. The bt_mesh_net_resend() function doesn't
own a reference to the buffer, i.e. it's not responsible for unrefing
it. E.g. bt_mesh_adv_send() takes its own reference.
What was missing however was the handling of the callbacks. Use the
recently introduced send_cb_finalize() helper to make sure they're
called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are several places that require the send callbacks to be called
immediately. Reduce the code a bit by introducing a helper for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPA timer should always be running, even with privacy supported by
the controller. In order to select an IRK to generate the private
the controller is instructed by provided an identity address.
If we want to advertise privately without providing an identity address
the host has to set the private address.
Fixes: #18150
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Mesh Profile Specification states in section 3.10.5 IV Update
procedure: "The IV Update procedure is initiated by any node that is a
member of a primary subnet", meaning if we're not on the primary
subnet we should not try to initiate the procedure.
Additionally this fixes initiating IV Update in all cases where the
sequence is updated, by putting the code into bt_mesh_next_seq().
Fixes#17977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This branch is inherited from old code that used to start the timer as
soon as a message was queued for transmission rather than when it was
actually transmitted (the case today). It'll also cause a race in case
the publication goes over the GATT layer since the "sent" callback
happens synchronously in that case.
Fixes#17821
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The GATT bearer is a reliable one so there should theoretically never
be a need to resend segments. If however for some strange reason the
proxy client doesn't immediately ack all segments we should do the
resending on the GATT bearer, rather than sending them over
advertising.
Fixes#17907
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was incorrectly bailing out with "return 0" rather than
continue. Also, it was incorrectly making a reference to
tx->seg[seg_o] since when a PDU goes through the friend queue we don't
use the usual retransmission mechanism.
Fixes: #17932
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case a queued buffer is canceled before sending we have to unref
it, since that's what adv_send() would do as well.
Fixes#17936Fixes#18013
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile 3.6.7.2 Publishing Heartbeat messages:
"
Triggered publishing of Heartbeat messages is enabled by
the Heartbeat Publication Features state (see Section 4.2.17.5):
...
- If the Low Power bit is set to 1, a Heartbeat message shall be
published when the node establishes or loses Friendship (see Section
3.6.6.1).
"
Fixes#18194
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending heartbeat messages triggered by feature changes the code
was trying to look up the configured publication subnet, in an
apparent attempt to figure out if publication is enabled or not. A
more appropriate way is to check for the heartbeat publication
destination address, and since we have a helper function this can be
done in a single place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat is a transport layer feature, so move it to transport.c.
This also opens the way to properly fix Friendship-established/lost
triggering for LPN role.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix missing interval min copy in bt_conn_set_param_le. Application is
unable to override BT_GAP_INIT_CONN_INT_MIN for interval_min.
Fixes: #17789
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix the pipeline prepare-resume implementation to correctly
handle multiple continuous events that request resume on
being pre-empted.
Symptoms of the bug being, when having continuous scanning,
and an active peripheral if a directed advertising is
started the peripheral event are not scheduled causing link
supervision timeout.
This is fixed by not having an enqueued resume event
prepared if there is an enqueued new non-resume event in the
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase pipeline size to accommodate probable multiple
prepare for directed advertising events, with reserved time
which are shorter than prepare duration, being enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the event start overhead time to accommodate for
processing time for dequeueing pipeline in Upper Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the maximum number of pending event done elements by
decoupling it from the maximum pipeline elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is safer now that bt_conn_create_pdu can return NULL when using
syswq which can prevent things like signalling of L2CAP and ATT layers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since TX complete notification are dispatched with syswq blocking on it
can completely deadlock Bluetooth so this attempt to make it safe by
return -ENOMEM if that the current thread happens to be the syswq
thread.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add shell commands to add and remove devices from the shell.
Add commands and options to use whitelist for advertising, scanning,
and creating connections.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add whitelist support in the bluetooth host.
Supported features:
- Advertising with whitelist on scan requests, connect request ,or both
- Scanning with whitelist
- Creating connections using a whitelist (Auto connection procedure).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow Security level HIGH and FIPS to be initiated when we have received
OOB data for the remote device. The security property of MITM is allowed
if out of band authentication data is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update bluetooth help text to include FIPS level in help text.
Also validate input range for the different connection types
Bluetooth security level for LE is from 1-4, while BR/EDR is 0-3
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Authentication using OOB data uses the on-air device addresses used
during connection setup. So we need to check against the on-air
addresses in the info object to see if we have correct OOB data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue with registering authentication callback handlers failing
without notifying the user of the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the src and dst naming to refer to the identity addresses of the
connection. Keep the device addresses used during connections but rename
them to local and remote instead.
Update documentation to be more descriptive.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
subsys/bluetooth/host/Kconfig.gatt is already sourced within an
'if BT_CONN' in subsys/bluetooth/host/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix the mandatory and optional parameter counts for the
directed adv shell command definition. Also, refactor the
command for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assert in the RPA timeout when no resolving entry exists in the
resolving list, and the advertiser was requested to use a local IRK
to generate it's own address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If no callback for oob data request is registered, or the user decided
to abort authentication during OOB data request, we should return the
error code for no OOB data available to indicate that the user does not
have the correct OOB, or no OOB interface at all.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix kernel crash if bluetooth authentication handlers has not been
registered. The bt_auth object is then NULL, this dereference caused a
call to an invalid function pointer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The code was already rejecting the key, however that rejection
happened only after we had already sent our public key as response,
which got interpreted as acceptance by the tester (PTS).
This fixes issue that d4fd267086a56c270a793114e7575afae9a9befa
supposed to fix. The problem is bt_dh_key_gen is async.
Local public key cannot be sent from the same context
the bt_dh_key_gen is called because we don't know yet
if remote key is valid.
Fixes MESH/NODE/PROV/BI-13-C.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixed error 'The int symbol BT_DISCARDABLE_BUF_COUNT is being evaluated
in a logical context somewhere'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
subsys/bluetooth/host/Kconfig.l2cap is already sourced within an
'if BT_CONN' in subsys/bluetooth/host/Kconfig, so BT_DEBUG_L2CAP does
not need a 'depends on BT_CONN'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Find by type does only accept a UUID with the same length as the UUID
which is stored in the internal list. If a UUID is stored in the short
16 bit format then a request with 128 bit UUID will fail.
Add support for the missing formats.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix an issue in the SMP identity distribution where the IRK for the
default identity was always distributed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug introduced by: 45da629b24
Mistakenly set the own address type to the destination address type.
Also this uses the RPA_OR_RANDOM in case local IRKs exists in the
controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The 'registered' flag was not cleared when 'gatt metrics off'
was called so that one was unable to register the service again.
Remove 'registered' variable that is actually not needed as there
is no tracking if service is already registered in similar
cmd_register_test_svc command. If the service is already registered,
the host will log an error.
Fixes: #17882
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The init addr should contain the on-air address used to establish the
connection. The dst address contains either the current RPA of the
unknown peer, or the identity address after identity information has
been exchanged.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix an issue where the generated identity was not permanently stored.
This resulted in being unable to reconnect after bonding when using
privacy, since a new local IRK was generated on reboot.
When settings is enabled the application is responsible for loading
identities and possible creating its own identities.
When settings_load is called and no identities has been created or found
in persistent storage a new identity will be created.
Since bt init has not been finalized bt_id_create will not make a call
to bt_settings_save_id. So we need to make sure that this identity will
be stored.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Logging module requires strings to be duplicated using log_strdup.
Enabling CONFIG_BT_DEBUG_KEYS caused runtime assertions in the logging
module.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Core 5.1, Vol 3, Part F, 3.3.1
"Multi-octet fields within the GATT profile shall be sent least
significant octet first (little-endian) with the exception of the
Characteristic Value field. The Characteristic Value and any fields
within it shall be little-endian unless otherwise defined in the
specification which defines the characteristic."
Fixes: GATT/SR/GAS/BV-02-C
Fixes: #17857
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The call to bt_conn_security will send a SMP security request for
peripheral, and for central it will initiate LL encryption.
A call to bt_conn_security with no IO capabilities but authenticated
keys has been distributed, would succeed on central side, but fail on
peripheral side with error code -22.
The keys could have been either:
- Preprogrammed
- IO capabilities may have changed.
- OOB bonding may been used.
Fix so that Peripheral can send a security request if the bond
information is already established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The original creates a pointer to a compiler-generated temporary that is
destroyed when the scope is exited. The pointer is stored in a structure
defined in an enclosing scope and is invalid by the point it's used.
The fix holds the structure in a variable with the same lifetime as
the pointer.
Signed-off-by: Findlay Feng <i@fengch.me>
Fix the pipeline prepare or resume dequeue loop from
overflow. Fixes premature exit of dequeue of done FIFO
which caused the pipeline to overflow due to previously
placed done is not dequeued correctly and next event not
being put back into the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This introduces a new flag (BT_GATT_SUBSCRIBE_WRITE_PENDING) which is
set when a write operation requires canceling before the parameters can
be reused.
Fixes#17534
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a dummy cancel request which is used instead of NULL when
clearing and outstanding request thus prevent new request to take
place before a response is received while allowing the original request
to be reused.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Set advertisers state flags so that previous advertise params does not
affect the current advertiser state.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile the use of Rx Pool used to dispatch ULL
context generated messages towards LL thread context, which
is presently only used in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a fix to handle L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Relates to #17046.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a bug related to missing reset of packet timing
restriction variable.
Fixes BT LL TS 5.1.0 test:
LL/CON/SLA/BV-55-C [Initiating PHY Update Procedure - Packet
Time Restrictions, LE Coded]
Related to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the Fast Encryption design and connection RSSI
measurement when CONFIG_BT_HCI_RAW is selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
This fix with avoid states/roles from stepping on each
others event length. Connection would have supervision timed
out or have stalled data transmissions due to insufficient
reserved air time.
Relates to #15171.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the implementation of initiator to use correct anchor
tick and remainder microseconds when sending out CONNECT_REQ
PDU and then to scheduling the first connection event. This
is a fix when initiator is in continuous scan.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt clear command accepts either 'all' or a bluetooth address.
If it is an LE address then type is also needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in the ported code of the connection update, when
the slave events are skipped due to other overlapping state
or role the connection update at the instant used wrong
latency calculations. This lead to connection disconnection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Submit GATT database hash as a delayed work to prevent it being run
twice if we register dynamic services.
Signed-off-by: François Delawarde <fnde@oticon.com>
Having this option disabled, MITM flag state can be controlled by
bt_conn_security state. This option is enabled by default to not
change the current implementation behavior.
Related to SM/MAS/SCPK/BV-01-C.
Fixes#17463
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle optional argument UUID in bt_gatt_discover with type
DISCOVER_DESCRIPTOR, bt_uuid_cmp doesn't check for NULL pointer.
On system with MMU (nrf52_bsim) this can result in segfault.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix assert in controller checking ticker_id_prepare = 0 when
a scanner and connection are active, and the connection is
skipping events in order to resize Rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the reset of ticker_id_prepare variable to the early
return in event_connection_prepare function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Two sections are needed: bt_l2cap_fixed_chan and bt_l2cap_br_fixed_chan.
However the second one cannot be created using #define as the
preprocessor will expand it to the first before compilation happens,
sending bt_l2cap_br_fixed_chan instances in the wrong section.
This fixes commit 4e8ddfd640 ("Bluetooth: L2CAP: Make use of
Z_STRUCT_SECTION_ITERABLE").
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Port the implementation that does radio event abort due to
ISR latencies. The implementation measures if the ISR could
not meet the hard real time deadline and closes the event
early.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added interface to get Advertiser and Scanner instance
handle for use in Lower Link Layer module.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix an issue in the gatt_register routine where removing a service and
adding it again would cause the database to have non-ascending
orderdered handles numbers and lead to an incomplete service discovery.
Fix: Go through the database and look for a place where to insert
the new service.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
Renames the "Blueooth Controller Assertion Handler" to "Application
Defined Assertion Handler" to better fit the purpose of the Kconfig
option.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mempool_base.h to sys/mempool_base.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Log all send errors, but don't try to call e.g. prov_send_fail_msg()
since that'll almost certainly fail as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 | Section 5.4.2.3:
"The Provisioner and the device shall check whether the public key
provided by the peer device or obtained OOB is valid (see Section
5.4.3.1).
When the Provisioner receives an invalid public key, then provisioning
fails, and the Provisioner shall act as described in Section 5.4.4.
When the device receives an invalid public key, then provisioning
fails, and the device shall act as described in Section 5.4.4."
This is also in Erratum 10395 which is Mandatory for Mesh v1.0.
The code was already rejecting the key, however that rejection
happened only after we had already sent our public key as response,
which got interpreted as acceptance by the tester (PTS).
Fixes MESH/NODE/PROV/BI-13-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 Section 5.4.2.3: "If the public key was not
available using an OOB technology, then the public keys are exchanged
between the Provisioner and the unprovisioned device. For each
exchange, a new key pair shall be generated by the Provisioner and the
unprovisioned device."
This allows passing MESH/NODE/PROV/BV-12-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Clear the callback list once generation is complete and we've done
calling all callbacks. This lets us use bt_pub_key_gen() multiple
times, which before this patch could have resulted in a corrupt linked
list.
Also remove redundant callback dispatching from bt_pub_key_gen() since
the function checks for the PUB_KEY_BUSY flag in the beginning, i.e.
there cannot be other pending generation actions at this point in the
code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update code to handle other users of the public key generation APIs
by fetching the current public key at the beginning of each SMP
session. This is particularly important if someone creates the (rather
odd) combination of Mesh and SMP where Mesh will regenerate a new
key pair after provisioning.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mismatch in Public Key type will cause device to send Invalid Format
error, and treat any further PDU's as unexpected.
This affects MESH/NODE/PROV/BI-03-C test case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provisioning errors shouldn't cause device to close link. Upon error,
device will send Provisioning Failed PDU, and any further PDU's will
be considered as unexpected as per Mesh Profile section 5.4.4.
Also a timer is started every time device sends or receives a PDU.
This affects MESH/NODE/PROV/BV-10-C test case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added a fix handling L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the bluetooth module to use static handlers. Removed the
old bt specific static registration.
The routine bt_settings_init() is still calling settings_init() which
IMO is not needed anymore.
Updates:
changed SETTINGS_REGISTER_STATIC() to SETTINGS_STATIC_HANDLER_DEFINE()
changed settings_handler_stat type to settings_handler_static type
removed NULL declarations
renamed bt_handler to bt_settingshandler, as bt_handler already exists.
renamed all bt_XXX_handler to bt_xxx_settingshandler to avoid any
overlap.
changed SETTINGS_STATIC_HANDLER_DEFINE() to create variable names from
_hname by just prepending them with settings_handler_.
updated all bt_xxx_settings_handler to just bt_xxx.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The string returned by bt_uuid_str() is not in ROM so log_strdup()
must be used on it. This also eliminates the following kind of warning
messages: "<err> log: argument 3 in log message "%s: start_handle
0x%04x end_handle 0x%04x type %s" missing log_strdup()."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Device Tree,and in particular a new 'bt-c2h-uart' to select which
UART is being used to communicate with an external BLE Host when acting
as a Controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Although the Characteristic Value descriptor is required to be
immediately after the characteristic descriptor, the specification
allows for gaps in the corresponding Attribute handles. Use the value
handle from the characteristic descriptor for value reads.
See BLUETOOTH CORE SPECIFICATION Version 5.1 Vol 3, Part G section 2.5.1
(p. 2345), first paragraph.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Update the Replay Protection List handling for segmented messages to
be more in line with Figure 3.43 in Mesh Profile Specification 1.0.
This means that the RPL check and update need to be split into two
independent steps rather than always doing these together.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix iterating past the response which causes an invalid memory to be
accessed and passed over to the callback as if there were more
attributes found.
Fixes#16602
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Moved and renamed ull_entropy_get to lll_entropy_get, placed under
vendor specific ll_sw. This is needed for SW implemented entropy,
to allow vendor implementation of faster, less secure random number
generator for randomizing ADV timing.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When advertising with different identities we need to flag any
programmed RPA as invalid if it was generated using a different
identity.
Fixes#16893
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This array was created because more than 4 bytes were needed, however
now the minimum is 8 bytes, so we can use the net_buf user data
directly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Reversed revised ticker implementation pending new design which resolves
the issues described in GH issues #16830.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix pending Tx control buffer leak on supervision timeout.
Queued tx buffers in LLL consists of both data and control
PDUs but only data buffers got correctly released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This makes it safe to allocate buffer from the TX callback by freeing
the context before calling the callback which should wake up the TX
thread had it be pending on add_pending_tx.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This API had several issues:
- The parameter types and order were inconsistent with e.g.
bt_le_adv_start()
- There were no real users of num_params, which just caused increased
code size and memory consumption for no good reason.
- The error handling policy was arbitrary: if one of the
notifications would fail it would be impossible for the caller to
know if some notifications succeeded, i.e. at what point the
failure happened. Some callers might also want to make note of the
failure but continue trying to notify for the remaining parameters.
The first issue is easily fixable, but because of the other two I
think it's best we don't have this code as part of the stack, rather
require whoever needs it to do the for loop themselves. It's just a
few lines of code, so the benefit of having this in the stack was
anyway quite minimal.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
k_sem_give shall only be used if no callback has been set otherwise
k_sem_take was not called which can break the flow control.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Port the implementation that performed random backoff of
forced slave event scheduling.
When peer master implementation skips events, multiple
local overlapping slaves will randomize their forced
scheduling to break out of a round robin pattern increasing
the chance of synchronizing with their masters again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For the request:
DCID shall map to rx.cid:
'This field specifies the endpoint of the channel to be disconnected
on the device receiving this request.'
SCID shall map to tx.cid:
'This field specifies the endpoint of the channel to be disconnected
on the device sending this request.'
For the response when receiving the roles are inverted.
Fixes#16799
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix scan requests being processed during directed advertisiments.
Directed advertise packets are not scannable
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds number of matches as optional parameter to gatt show-db:
> gatt show-db 2803 1
attr 0x005065f0 handle 0x0002 uuid 2803 perm 0x01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Number of matches was not being properly handled causing the callback to
be called more than specified by the caller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the bt_mesh_msg_ctx struct no longer has a size that is a
multiple of 2, the bitfields might as well be made to normal types
as this will minimize the code generated to access them.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
By moving the rssi value from the bt_mesh_net_rx struct to the
bt_mesh_msg_ctx struct, it will be available to applications via
the mesh op callbacks.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
The attribute handle used to read next attribute has to be incremented
to not loop reading the same attribute.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When trying to establish friendship the Friend must respond to the
initial Friend Poll with a Friend Update. If this initial Friend Update
response is not received the Friendship establishment process must start
again.
When starting a second Friendship establishment processes the `sent_req`
field of the `lpn` struct was left set to `TRANS_CTL_OP_FRIEND_POLL`.
This prevented the initial Friend Poll being sent out on the second
attempt. Since the Friend Poll was not sent, no timeout is set and
nothing happens ever again. No more Friendship Requests are sent.
This commit clears `sent_req` back to zero when no Friend Update
response has been received after the initial Friend Poll.
Fixes#16678
Signed-off-by: Rich Barlow <rich@bennellick.com>
Add some missing fatal asserts that need to be caught to
avoid unexpected failures in the implementation of the
architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Although unlikely it is possible that a remote may attempt to send just
1 byte as the write request allows to do that:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F
page 2320:
'If the attribute value has a fixed length and the Attribute Value
parameter length is less than or equal to the length of the attribute
value, the octets of the attribute value parameter length shall be
written; all other octets in this attribute value shall be
unchanged.'
Fixes#16734
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the tx_ack mfifo count to accomodate both data and
control PDUs being acknowledged.
With out this fix, pending maximum number of data plus
control PDUs in LLL on supervision timeout asserted due to
tx_ack mfifo overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the master clock drift.
Relates to #11764.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added an internal ull_update_mark function to detect race
conditions while stopping ticker instances during slave
drift, disconnection and connection update.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This convenience macro wraps Z_DECL_ALIGN() and __in_section() to
simplify static definitions of structure instances gathered in dedicated
sections. Most of the time those go together, and the section name is
already closely related to the struct type, so abstracting things behind
a simpler interface reduces probability of mistakes and makes the code
clearer. A few input section names have been adjusted accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The alignment fix on struct device definitions should be done to all
such linker list tricks. Let's abstract the declaration plus alignment
with a macro and apply it to all concerned cases.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When reading attributes from static services their handles will not be
set and must be resolved at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Port the fix for the controller implementation to make start
encryption queueable if there is any control procedure in
progress.
Refer to #15335.
Relates to #15335, #15186, #15958 and #14636.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix disconnect command optional argument count to permit the
supply of Bluetooth Address so as to be able to cancel a
pending central initiated connection creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix gatt indicate when conn is NULL and called with characteristic
declaration as the attribute argument. In this case the handle was not
advanced to the characteristic value. This is inconsistent with the rest
of the notify and indicate API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mesh Profile 1.0 Section 6.6:
"The timeout for the SAR transfer is 20 seconds. When the timeout
expires, the Proxy Server shall disconnect."
This will let qualification test case MESH/SR/PROX/BV-05-C pass
without requiring an explicit disconnect.
Fixes#16600
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This moves the processing packets of upper layers from RX thread to the
system workqueue so they have the same priority as the TX callbacks
which has the added benefit of making any protocol on top of L2CAP to
be executed using system wq stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disable flow control with POSIX_ARCH since these boards tend to run
faster than normal defering the TX callback to system wq may not be
able to run before another packet is received.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the transmission complete callbacks to run on system wq
context so they are not executed in TX thread which usually has a much
smaller, and non-configurable, stack size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reworks bt_gatt_notify_cb to allow passing an UUID, in addition to
that it can now accept multiple notification at once as there could be
multiple instance of the same UUID the user can set multiple set of
parameters.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type in gatt show-db to match
attributes by UUID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type to match the CCC UUID which
previously was not possible with bt_gatt_foreach_attr.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_foreach_attr_type which can match attribute by UUID
and/or attribute user_data, in addition of that the user can also limit
the number of matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When removing a service using bt_gatt_service_unregister, its attributes
handles will keep their value which can cause a problem when adding the
service again to the GATT database.
When re-adding, the gatt_register routine is taking the last handle of
the GATT database to compare it with the handles of the service to be
added.
If a service has handles with a lower value than the last handle of
the database an error will occur.
If we add/remove/add the last service, no error will occur as its
handles are always greater than the last one of the database.
Instead of resetting the handles when unregistering a service and
reassign new ones we make sure that the handles of the services are
not in use in the GATT database in order to place the service back
where it used to be.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
This adds a new callback for L2CAP channels which notities whenever
status has changed so the channel user can can for example resume or
suspend sending depending on the status.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth menu has way too many option so this move the L2CAP
specific option to its own menu.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints to the output when a packet finishes transmitting:
uart:~$ l2cap send 2
Outgoing data channel 0x005166a0 transmitted
Outgoing data channel 0x005166a0 transmitted
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new callback to bt_l2cap_chan_ops which is called whenever a
SDU is completely sent.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes the declaration of fixed channels to be statically defined
with use of BT_L2CAP_CHANNEL_DEFINE since fixed channels are never
unregistered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix shell app regression due to stale tmp role implementation
not fully being removed in commit 4c77bf6194 ("Bluetooth:
controller: Remove redundant tmp role implementation").
The regression caused ticker indexes outside of allocations to
be accessed causing application faults and memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added support for the LE SC pairing with the OOB data. The peripheral
side is only supported for now.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The the footer structure and extra bytes (rssi, resolving index etc.)
were overlapping in memory, rx_ftr was moved into the header, but the
extra and footer are still being read from the same place, extra was
written to the end. So this avoided memory corruption, but reading extra
reads wrong information.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compilation issues in central_hr or peripheral_hr sample when using
split LL and privacy is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The node_rx buffer does not contain the data from the connect ind, so
copy it over.
Also back up the adv pdu chan_sel bit so that it can be used to properly
select the correct channel selection algorithm
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The node_rx buffer for the connect ind buffer is being reused to send
connection complete event, make sure all data is backed up before
reusing the buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The privacy state variables rl_idx and rpa_gen was not initialized
properly, which results in connection failing to be established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Code refactored to allow calling of a proprietary rx demux function.
This will enable implementation of proprietary protocols and
functionality that is not yet public, while keeping a common zephyr
code base.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
A conditional block to save a directed advertising report flag was
present three times. Remove two of the blocks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add an event handler for HCI vendor-specific events with the
event code BT_HCI_EVT_VENDOR.
A vendor defined callback can be registered to be called when
vendor-Specific events are received in the stack. The callback can then
decode and handle the event; if not the stack will decode and handle
the event.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When using the procedure Read By Type the response may contain multiple
instances so it needs to be parsed properly. When dealing with long
values only the beggining will be read, for the remaining bytes the
application should issue another bt_gatt_read with offset so Read Blob
procedure is used as recommended by the spec:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F page 2312:
The Read Blob Request would be used to read the remaining octets of a
long attribute value.
Fixes#16107
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Port fix for #14044 from legacy LL to split LL.
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove comment stating that UNKNOWN_RSP during encryption procedure
is a workaround.
The core spec mandates that connections should not be dropped if
receiving this control packet during encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
The old footer was appended after PDU using pointer arithmetic. Now
the footer fields have been moved to the header struct, the
footer fields are now statically located in the data structure,
this is type safe and fields can be referred to by their actual
names rather than indirectly through reference to other members,
thus avoiding pointer arithmetic. Secondly, this change will pave
the way for adding other meta data in the future.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
The 'Bluetooth' menu contains just 'config BT' and its indented
children.
Remove one menu level by removing the 'Bluetooth' menu and turning BT
into a 'menuconfig' symbol. Also change the prompt from "Bluetooth
support" to just "Bluetooth", to make it consistent with e.g. "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Relates to #15366.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the encryption setup queueing implementation to avoid
overlapping with local initiated Length Update Procedure.
Fixes#15733.
Relates to #15335, and #15186.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If the local node keeps getting bombarded with messages, it's possible
that the storage timer gets rescheduled over and over again and never
expires. Add the necessary code to only reschedule the timer if the
new deadline is earlier than an existing one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The default values for the timeouts, as well as non-defaults in most
Mesh samples, use a higher value for the RPL than then generic mesh
storage timeout. This hasn't had any effect in practice since the code
only uses the RPL timeout if it is *smaller* than the generic one.
The original intention of the code was to use the RPL timeout,
regardless of what the generic one is, whenever the RPL is the only
thing that needs updating. Add some helper macros to track the various
groups of pending flags, and perform the appropriate checks to apply
the RPL timeout whenever it's smaller than the generic timeout, or if
there are no other items to store besides the RPL.
Fixes#15904
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a follow up to commit 0eaa5e53a36af498115b4e56b1ea68cc89fc29ee.
`HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE` is a base number for two PPI
channels, so two bits need to be marked in the used channel bit mask.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix calling bt_gatt_foreach_attr with start handle parameter set
to last static attribute handle.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Due to a protracted merge of:
5e38ed9320
the naming for the HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI changed
semnatics, now requiring use of
HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Mark the PPI channels and groups used by the Bluetooth controller
as occupied and thus unavailable for allocation through nrfx_ppi.
Add also a build time assertion that checks if these PPI channels
do not overlap with those assigned to the pwm_nrf5_sw driver
(to replace the comments in this driver that were supposed to warn
about this threat but had in fact little chance to be read by users).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Disable the unsupported controller privacy feature in the
ULL/LLL split architecture implementation.
This feature will be enabled in the future when it has been
ported to support multiple vendor SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the support for Zephyr HCI Vendor-Specific Commands
and Event in the ULL/LLL split architecture implementation
of the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly defined Rx and Tx buffer sizes. Wrong
calculation allocated more memory than necessary.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig default values for ULL and LLL execution
priorities that caused build warnings when ranges changes
based on other priority values being selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect data type used in calculation of slot_us
detected by compiler, and reported as possible integer
overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect conditional compilation that caused compile
error when lll_scan structure did not contain connection
context included which is needed only for central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570, and #15727.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Increase the resolution of advertising random delay from
1 ms unit to 1 ticker unit.
Relates to #10289, #10391, and #10398.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added prompt to BT_CTLR_RX_PRIO_STACK_SIZE, allowing vendor specific
configuration of high priority Rx thread stack size for
!SOC_COMPATIBLE_NRF.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix XTAL advanced feature by adding the missing
implementation to calculate and, retain or release the XTAL
clock source after a Bluetooth state or role is stopped.
Fixes#15817.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to toggle GPIO Debug pins on HFCLK
request and release by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement a lower ISR latency ULL processing design. Instead
of looping use ISR/mayfly tail-chaining to process
successive ULL messages.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented ULL to yield from processing in an infinite loop
if current PDU being handled is deferred.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing BT_CTLR_FILTER conditional compilations that
cause compile errors when device whitelisting feature is
disabled in builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
* Rename the stack local 'done' to 'evdone' so as to disambiguate from
MFIFO_DEQUEUE_PEEK(done) which is actually 'mfifo_done'.
* add comment on ull_slave_done
* add comments to addr_us_get
* add comments to HCI_CLASS
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the nRF52840 Coded PHY radio timings based on testing
with conformance tester.
Fixes the following conformance tests:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI Change]
LL/CON/MAS/BV-54-C [Slave Receiving Data, LE Coded, CI Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression in Coded PHY CI change implementation
introduced by reverting the commit 9d1ca9c390 ("Bluetooth:
controller: remove redundant PPI channel and TIMER CC").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added Kconfig BT_MAYFLY_YIELD_AFTER_CALL to support vendor requirement
of invoking all outstanding mayflies for a given callee in
mayfly_run().
Signed-off-by: Morten Priess <mtpr@oticon.com>
In ull.c ll_rx_get, a configuration without CONFIG_BT_CONN would
sometimes return an uninitialized node_rx.
In ull_scan.c, the scanning channel was not initialized to 0 (37). This
would cause new scanning to start at random index (0,1,2).
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add defines to support updated slot reservation calculation in advertise
Note: Numbers used in added defines are subject to HW specific tuning
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Added a new define (EVENT_IFS_US) to pdu.h - this is now used instead of
previous TIFS_US from vendor specific header
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Correct slot reservation time calc for legacy advertise
Add dependency on data lengths for advertise and scan response
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix regression by the addition of CONFIG_BT_CONN conditional
compilation that disabled the advanced clock (crystal)
oscillator management when only observer and/or advertiser
states supported in the controller build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Aligned format specifiers for the Bluetooth Host. Now, the format
specifier matches the variable type.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This patch adds support for Read Using Characteristic UUID which is one
of the procedure to read the characteristic value especially when the
client only knows the characteristic UUID and does not know the handle
of the characteristic.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Added implementation to pause data PDU transmission during
PHY update procedure in order to comply to BT Spec. v5.1
Vol.6, Part B, Section 5.1.10.1 Packet transmit time
restrictions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactoring to move PKT_US into ULL internal header,
and rename ull_conn_allowed_check to ull_conn_llcp_req.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ported implementation of Data Length Update Procedure to
ULL/LLL architecture of the Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This introduces set command to GATT which can be used to write local
attributes:
uart:~$ gatt set 0x000b 62 6c 61 68
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 62 6C 61 68
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces get command to GATT which can be used to read the
local attributes:
uart:~$ gatt get 0x000b
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 74 65 73 74 20 73 68 65 6C 6C
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables locating specific attribute in the database:
uart:~$ gatt show-db 0x2a00
attr 0x004235a8 handle 0x000b uuid 2a00 perm 0x09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
General MIC fix for AAD lengths up to 14 bytes.
This case doesn't concern the mesh stack because it uses 16 bytes.
Signed-off-by: Reham Tarek <reham.tarek@si-vision.com>
This stores the database hash and check if it has changed on commit
skipping service changed if hash matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Custom handlers without any arguments don't since there is a check for
argc > 1, to fix this behavior removing the check.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If handle is over the range end return since handles are always placed
in ascending order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces bt_gatt_foreach_attr complexity (O(n)) so it can skip
ahead when the start handle is not within its service handles.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It may be very important information for the developer if scanning
fails to start or stop, so add proper logs. There's no need to log
EALREADY errors, since the mesh stack doesn't track the current scan
state and simply relies on the under lying GAP layer to return this
error if the desired state is already set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_gatt_connected should be only called, when there is no
connection error. Change fixes problem with receiving notifications
before connection.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The commit 8d0ef1eb85 attempted to fix
test case MESH/SR/HM/CFS/BV-02-C, however inadvertently ended up
introducing a hidden bug. This bug was unearthed thanks to commit
686f5c79cf. We have to keep always track
of the FastPeriodDivisor state whether we're using it (faults > 0) or
not (faults == 0). Introduce a boolean field to the model publication
that's used to indicate whether the FastPeriodDivisor should be
applied or not, instead of zeroing the divisor when there are no
faults (this would cause wrong behavior when faults appear again).
Additionally, the PTS seems to require that we wait until the end of
the existing period before sending the next Health Current Status,
rather than sending it immediately when the fault count changes.
Fixes#15365
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix the controller implementation to make start encryption
queueable if there is any control procedure in progress.
The context related to encryption procedure is now shared so
that it will be used after the ongoing procedure completes.
The fix here maintains the old functionality of serializing
the queued data and LL Encryption Request PDU, so that data
queued before start encryption is acknowledged.
Fixes#15012.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When a device is considered unpaired any configuration set in Client
Features shall also be removed.
Fixes#15329
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Send unknown rsp instead of asserting when encryption related control
PDUs are received in the wrong state.
This would allow an attacker to intentionally crash the device.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the Length request procedure from initiating during the encryption
procedue. This would cause the peer to disconnect the link with error
code LMP_TRANSACTION_COLLISION
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the encryption procedure pending and start it as soon as
there are no other procedures running.
This allows the Host to enqueue the encryption procedure, and not
get disallowed command because a different LL procedure is active.
Fixes#15012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When calling bt_unpair() the keys were removed from flash, however a
pointer was left to the invalidated keys in case there was an existing
connection. This would then lead to a bogus entry being stored in
flash for a zero-address peer device. Fix this issue by clearing the
conn->le.keys pointer in the bt_unpair() function.
Fixes#15325
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_fault_update() API is meant for updating the publication
message and sending it out to the network, however it was missing the
necessary call to health_pub_update() which is responsible for
updating the publication message.
Fixes#15300
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes:
.../zephyr/subsys/bluetooth/shell/bt.c:906:12:
warning: 'cmd_chan_map' defined but not used [-Wunused-function]
Signed-off-by: Jim Paris <jim@jtan.com>
Persistent storage is done. So are the configuration and health
clients. We're also not actively looking to optimize the provisioning
protocol & mesh networking memory usage anymore.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The fix done in #14938 introduced a later assert when raising an HCI
event for the procedure that was terminated during the procedure
collision handling. This assert happens because the unknown rsp
has information that is needed when raising the event.
Solve this by copying the scratch packet into the node buffer so that
we keep the data.
Fixes#15183
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The spec allows to set to no specific value with use of 0xffff.
As this still enables entering values in the invalid range, 3200-65535
for min/max interval, this adds the necessary build checks to prevent
values within this range to be used and at same time check if min
interval is not bigger that max interval.
Fixes#15017
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In order to advertise directed to a privacy enabled central the
initiator field of the directed adv packet needs to set to an RPA.
To instruct the controller to use an RPA in the initiator field own
address type should be set to either 0x02 or 0x03.
Since it is not certain that a remote device supports address resolution
of the initiator address we add an option to turn this on and give the
application the responsibility to check if peer supports this.
Fixes#14743
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to accept string of the same size entered in
CONFIG_BT_DEVICE_NAME_MAX an extra byte must be allocated to guarantee
it will always be NULL terminated.
Fixes#15067
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no need to track this info in prov.c since hci_core.c is
already doing it. Just query hci_core.c always using the
bt_pub_key_get() API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If PB-GATT is disabled while there are connected clients, those
clients must be disconnected. Add a 'disconnect` parameter to
bt_mesh_proxy_prov_disable() to handle scenarios when we don't want to
disconnect (e.g. right after successfully finishing provisioning) and
tose where we do want to disconnect (e.g. user requesting to disable
the provisioning bearer).
Also make sure that we always update advertising, so that a stale
advertising set isn't left in the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If both PB-ADV and PB-GATT are supported, we need to properly
re-initialize variables such as link.rx.prev_id and (particularly
importantly) link.rx.buf. If we don't do this it may lead to the
following fault when trying to reprovision again:
***** USAGE FAULT *****
Illegal use of the EPSR
***** Hardware exception *****
Current thread ID = 0x20001f10
Faulting instruction address = 0x0
Fatal fault in thread 0x20001f10! Aborting.
Fixes#14928
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove unnecessary const keywords (the entire struct is const) and use
bool instead of u8_t for the require_link member.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using settings_delete() makes it much easier to understand what the
code is doing, and actually also reduces the amount of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add error checking, remove redundant code, and improve the logging for
settings related functionality.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The read() callback of attributes returns ssize_t and not size_t. Fix
this, which also fixes a Coverity warning.
Fixes Coverity CID 197457
Fixes#14958
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention in the code is to use the appropriate address copying
functions instead of direct assignments. Even when a specific copying
function doesn't exist the convention is to use memcpy.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Fixes#14044
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Updating the Resolvable Private Address when advertising and
active scanning in progress fails and clears the RPA_VALID
flag; making the next bt_le_scan_start while continuing to
advertise to fail.
This is fixed by keeping the RPA_VALID flag remain set.
Stopping and starting active scanning to update RPA can be
implemented in a separate commit.
Fixes#9463.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When building ticker.c from the shell, it requires include access to the
Nordic HAL, so add the relevant folder to the include path.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With BT_HOST_CRYPTO, advertising stack size could be overflowed,
increase size to 1024 when BT_HOST_CRYPTO is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Command scan fixed in the way that it can take one mandatory parameter
and one optional. Previously it accepted only 2 mandatory parameters.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed automatic argument count checking in bt command. Now
it is possible to print a message that extra argument is not
recognized.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Several public APIs were not checking the BT_DEV_READY flag, which
could lead to hard-to-debug behavior, particularly when the stack
lacks an identity address. Add the appropriate checks to these APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The treatment of the BT_DEV_READY flag was broken when used together
with BT_SETTINGS. The flag would get set even though the stack was
still in a partially initialized state. Even worse, for central role
the stack would potentially try to initiate passive scanning without
having an identity address.
Refactor the code that sets the BT_DEV_READY flag (among other
initialization) into a separate bt_finalize_init() helper function and
call it when the settings have been loaded. Also clarify the warning
message given to the user in case settings_load() needs to be called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix a bug where the controller would use the length
field of the advertisement packet before checking
if the length field was valid.
It is possible that the controller has received a packet
that passes CRC check but has a length field that is invalid.
This would cause the scanner to overwrite the scan report
buffer
Fixes: #14741
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The code for clearing model bindings and subscriptions was flawed in
that proper "cleared" entries were never stored in settings. The code
must pass 0 and NULL to settings_save_one() in case the entry is
desired to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was storing a "cleared" entry in storage for every model,
regardless of them having any subscriptions or not. Update hte
mod_sub_list_clear() function to return a "cleared entries" count so
that the calling code can decide whether any action is needed or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant "val (null)" logs and add a few missing BT_DBG()
calls to make the tracing of storage handling easier.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The le_conn_param_req() function was missing a return statement in
case of a failed connection lookup. This could lead to replying to the
connection parameter request twice as well as passing NULL to
bt_conn_unref(). The latter issue also triggered a Coverity warning.
Fixes CID 196638
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_WARN() should only be used for log messages that may indicate a
problem. However, the controller HCI code was using it for messages
that were of a pure debugging/informational nature. Convert these to
BT_DBG() instead - this should hopefully also help avoid unnecessary
user questions of seemingly alarming log messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The 2M and Coded PHY bit should not be set when the
PHY update procedure is not supported.
Fixes#14658
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Peer side will disconnect if controller initiates
Encryption procedure before PHY update procedure
has finished.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in LL encryption procedure, controller was
using the wrong pointer to connection state.
Function event_enc_prep is called from
slave_event_prepare, where _radio.curr_conn has not
been assigned yet.
The connection ended up sending LL_START_ENC_RSP
unencrypted, resulting in disconnect on the peer
side with reason MIC failure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix implementation to correctly return the configured
default Tx Power Level.
Also, fix the missing use of RADIO_TXP_DEFAULT in the new
ULL/LLL implementation of Advertiser and Observer states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation in controller to use range delay
alongwith the active clock accuracy jitter.
Range has been hard coded to 1000 meters, suffices
modules out in the market.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to regression the option to enable PHY Update Procedure
on proprietary 2M PHY for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround from asserting when Rx PDU buffers from pool
needing resize is acquired by another connection. By
skipping the connection events to give some headroom for
the host to process the Rx packets and eventually make the
pool available for resize.
Fixes#11841.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There's a BT_DBG that will output the value of pub_addr before its ever
set to anything. Remove output of pub_addr from BT_DBG().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds BT_GATT_DISCOVER_ATTRIBUTE which can be used to discover any
type of attribute in a given range.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Those are not considered Descriptors and shall be discovered with
use of BT_GATT_DISCOVER_CHARACTERISTIC.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When discovering descriptor Find Information procedure is used which
does not allow any filtering by the server so it will return all
attributes in the given range including services and characteristics.
Fixes#14265
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use reverse order for bitfields on big-endian architectures. Treat
all PDU data as little-endian and add conversions as needed. Treat
access address as 4-byte value instead of u32_t to avoid flipping
endianness.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
By specifying the controller directly when selecting the default
BT_HCI_TX_STACK_SIZE, an external controller may rely on the final
default value when none of the in-tree controllers are used.
The value is increased to 1024 to accomodate the current worst-case
stack size.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
This moves the vendor-specific HCI command/event configuration
definitions out of bluetooth/common into bluetooth. This allows
the controller itself to indicate its support for vendor-specific
commands/events.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
subsys/bluetooth/common/Kconfig and subsys/bluetooth/host/Kconfig are
'source'd within 'if BT' and 'if BT_HCI', in subsys/bluetooth/Kconfig,
so there's no need to add those dependencies within them.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Check the return value of mayfly_enqueue() and assert if not successful.
Coverity ID: CID 190991
Fixes#13833.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Inside ll_test_end(), result of lll_clk_off() is not checked
which might result in releasing resources acquired for radio.
Coverity-CID: 190954
Fixes: #13861
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Due to regression the option to enable Data Length Update
Procedure for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Some old peer central controllers respond with Unknown
Response PDU to our local Slave Initiated Feature Request
after the peer initiated the Encryption Setup Procedure.
The peer has voilated the Bluetooth Specification by sending
the Unknown Response during the Encryption Setup Procedure,
but as a workaround to IOP with such controller our local
implementation is updated to not disconnect the connection
but accept the voilating Unknown Response PDU.
Relates to #12362.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
CCC cfg value was not being cleared on disconnection of a non bonded
peer if another peer was connected, had non zero value and occurred
earlier in the ccc cfg array.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
Variable evt_prop could be used without being initialized. This problem
was spotted by coverity.
CID 190970
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This makes use of BT_GATT_CCC_MANAGED so instead of having a custom
attribute which is not managed by stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code for finding a CCC config in a helper function
thus reducing the amount of duplicated code.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds another helper macro called BT_GATT_CCC_MANAGED which can be
used to set 2 new callbacks:
- cfg_write: Which application can set if it wants to manage writes to
CCC configuration.
- cfg_match: Which application can set if it wants to manage matching
CCC configuration when notifying/indicating.
BT_GATT_CCC_MANAGED retains the ability of saving peer configuration
on storage making it useful for clients which are only interrested in
managing the CCC configuration but not the storage itself.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Prevent temporary strings from being printed incorrectly if they go out
of scope before being processed by logger.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
The bt_settings_encode_key() cannot know if the given path pointer is
on the stack or not, so the only safe way to pass it to the logger is
by using a log_strdup() call. Not doing this will likely cause
corrupted strings to show up in the log output.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
mem_pdu_rx is not runtime resized meaning PDU_RX_SIZE_MIN is no longer
relevant.
Dynamic resizing was a left-over from the old bt controller.
Its size field was only ever set to PDU_RX_SIZE_MIN.
PDU_RX_SIZE_MIN only accounted for advertise PDUs.
So we remove size field from mem_pdu_rx.
However, the rest of the BT controller expects to be able to pull
RX_CNT-number of valid nodes from the pool at init/reset (rx_alloc)
time. This will fail unless we inflate the capacity by one.
To avoid inflation-by-one, mem_* would have to be rewritten to avoid
always-one-extra pattern.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Refactor PDU_RX_POOL_SIZE into its constituents and name each term.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix a bug in Encryption Procedure feature conditional
compile which prevent any data transfer when the feature was
disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Changed the order of Bluetooth callbacks. Now the connected callback is
received before CCC changed callbacks.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
In certain configurations, such as with MPU support enabled, the
consumption of the advertising thread has gone slightly up. In some
case it was seen to overflow by some 48 bytes. Let it always be 786,
like it was so far with CONFIG_BT_HOST_CRYPTO.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Slight tweaks to memq comments,
* Document most of mfifo through commentary.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* Clarify certain functions and data structures in upper link layer.
* Disambiguate node rx event done, add commentary.
MFIFO_DEQUEUE macro does string concatenation.
Thus MFIFO_DEQUEUE(done) does not refer to done (the stack local), but
mfifo_done.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
ull_ref_inc already existed, but not ull_ref_dec.
No functional change expected.
Consistency is preferred due to code navigation.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Rename ull_tx_ack_put to ll_tx_ack_put as ack is enqueued
into LL thread context from ULL ISR context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move PKT_US definition from LLL header file to ULL header so
as to share it across vendors.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error due to missing conditional compile of
connection related code when selecting only observer state
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds BT_GATT_ENFORCE_CHANGE_UNAWARE option which when enable
returns -EAGAIN when notifying or indicating if the client is
change-unware to conform with following statement on the spec:
'BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2350:
Except for the Handle Value indication, the server shall not send
notifications and indications to such a client until it becomes
change-aware.'
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2405:
'For clients with a trusted relationship, the characteristic value
shall be persistent across connections. For clients without a
trusted relationship the characteristic value shall be set to the
default value at each connection.'
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This implement Robust Caching which is mandatory when Database Hash and
Service changed Characteristics are supported.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This implements the Database Hash characteristic which generates a hash
with the contents of certain attributes. The generation of hash is
usually offloaded to the systemwq using a delayed work so that when
application register multiple services only one hash needs to be
calculated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Client Supported Features characteristic is used by the client to
inform the server which features are supported by the client.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_GATT_CACHING option which can be used to enable support
for Client Supported Features and Database Hash characteristics.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When optimizations are disabled more RAM is used and we get a stack
overflow on BT_HCI_TX_STACK_SIZE. To rectify this, increase the stack
size when CONFIG_NO_OPTIMIZATIONS.
This does not scale well, and will have to be replaced by a a more
general solution eventually, but in the mean time it follows the
existing best practice established by the GCOV infrastructure in
commit e908ea9aa5
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Translate HCI error codes to POSIX error codes in order to be able to
distinguish reason of connectable advertising start failure.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Return meaninful HCI error when it's not possible to start advertising
because of maximum number of connections already in use.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Remove the redundant proof of concept template temporary
role implementation from the repository.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
During regression testing of PA/LNA feature it was noticed
that compilation failed due to missing port of the code
conditionally compiled for PA/LNA feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert the hci_spi sample to get the SPI and GPIO settings from Device
Tree instead of Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The Bluetooth 5.1 specification was recently released, and has a new
version identifier (10) assigned to it in the Bluetooth Assigned
Numbers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the remaining places of the host stack where
net_buf_pull_mem() makes more sense than net_buf_pull().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Take advantage of the new net_buf_pull_mem() API, and refactor the
events from long switch statements into (const) handler tables. This
helps reduce code size and makes it cheap to add proper checks/asserts
for having sufficient data in the buffers coming from the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's more natural to use net_buf_pull_mem() for the HCI command
parsing. Note that this also fixes a bug in hci_cmd_handle() where it
would previously check for sufficient parameter length with the
command header still included in the buffer (which it shouldn't have
been).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Sending a model publication message could fail e.g. if there are no
buffers available, however this doesn't mean that we should stop doing
periodic publishing indefinitely. When an error occurs, make sure to
call the publish_sent() function so that the periodic publishing timer
gets resubmitted if necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the Friendship & Low Power Node features aren't
available or feasible, however power saving is nevertheless required.
This patch introduces two new APIs to suspend and resume the Mesh
network. Currently, what this impacts is the LE scanning, the
ability to allocate new outgoing buffers, as well as the model
publishing, beacon and heartbeat timers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tracking of the BT_MESH_VALID flag and the PB-GATT state was rather
fragile. Add proper error returns to the various GATT service enable &
disable handlers, and toggle the BT_MESH_VALID flag in a single file
(main.c). Use the newly added error returns to ensure that we don't
re-enable PB-GATT if it wasn't already enabled from before.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's already a flags member in the bt_mesh context, so take
advantage of that for any boolean members that have so far been
bit-fields. This should produce more efficient code, also for the
sequence number that's now its own u32_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build fails in smp.c:3942 if BT_SMP_SELFTEST is enabled,
sign_test uses smp_sign_buf which only available for BT_SIGNING.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix the control procedure context safety by adding checks in
thread mode control path to detect pre-emption by interrupt.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a squash merge of commits introducing the new split
Upper Link Layer and Lower Link Layer architecture of the
Bluetooth Low Energy controller.
This introduces a new, improved Link Layer based on the
concept of split responsibilities; The Upper Link Layer
(ULL) is in charge of control procedures, inter-event
scheduling and overall role management. The code for the
ULL is shared among all hardware implementations. The
Lower Link Layer (LLL) is responsible for the intra-event
scheduling and vendor specific radio hardware access.
The communication between ULL and LLL is achieved through
a set of FIFOs that contain both control and data packets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Missing updates to old architecture implementation towards
introduction of new ULL LLL architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the internal LL interfaces to have return value
to match the HCI error code u8_t data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds write-without-response-cb command which can be used to
confirm the transmission of the PDU using bt_gatt_write_without_rsp_cb.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_write_response_cb works similarly to
bt_gatt_notify_cb which can take a callback to be called when the PDU
is considered transmitted over the air.
Note: This can also be used to disable the ATT flow control which would
blocks sending multiple commands without wainting their transmissions.
Fixes#11558
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current stack consumption with the H4 driver on qemu_x86 is as
follows with a change from 256 to 512:
usage 396 / 512 (77 %)
Increase the default for this configuration, as well as other similar
configurations. Set the fallback default to a higher value as well.
Fixes#12429
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The msg->prev_addr is already stored in frnd->clear.frnd, so there's
no need to have an extra stack variable for this (in the form of
prev_addr).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use fixed-width type instead of enum for field op in struct
ticker_user_op to avoid struct layout differences between
compilers. Also make check whether struct sizes match size definitions
build-time asserts.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Since `str` is the output buffer, `bt_hex_real` should limit its output
length according to the `str` size, not the `hex` size.
Signed-off-by: Jiahao Li <reg@ljh.me>
Currently, when handling a Friend Request message with `prev_addr` set,
we look up existing friend entry using `prev_addr` as the address.
However, `prev_addr` is the address of the requesting node's previous
friend, NOT the address of the requesting node itself. Therefore, we
should always look up existing friend entry using `rx->ctx.addr` as the
address.
Signed-off-by: Jiahao Li <reg@ljh.me>
Adds documentation-commentary to some infrastructure used by the LL.
It is a long-term effort to better document the LL.
Notably ticker and mayfly require more documentation; this will be
done later.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Changes to Bluetooth shell application related to the
controller split architecture preparation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This fixes usage of an uninitialized variable (to_store) as introduced
by commit bfad2a0.
Fixes#12314
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When using bt_gatt_discover with BT_GATT_DISCOVER_CHARACTERISTIC the
read callback would be set to bt_gatt_attr_read_chrc which would attempt
to access the next attribute which in this case would not be set since
the value attribute is no fetched by the discovery, the spec actually
omit the value handle saying it should always be the first attribute to
appear after the characteristic thus we can assume it to be handle + 1.
Fixes#12159
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa@gmail.com>
Changed number of valid arguments from two required to
one required and one optional.
Command can be called with required <type: off, on, scan, nconn>
and optional <mode: discov, non_discov>".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Function name prefix is now configurable (by default only debug
messages are prefixed) and log macros can be simplified.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix in the do_ecb() function
In real HW this function busy waits for the ECB to be done.
In simulation with the POSIX arch a WFE was added to avoid that
infinite loop.
But this function is called with the ECB interrupts disabled.
In normal builds other interrupts will awake the CPU very soon
after entering into that WFE, and the problem was not discovered.
But, in controller only builds, during some conformance tests,
the loop will hang as no other interrupts are coming.
=> Replace the WFE() with a k_busy_wait (only for simulation)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix channel map update procedure implementation's handling
of different transaction collision by not asserting but
disconnecting the connection due to invalid behavior by
peer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Both "store" and "clear" are verbs, so putting them after each other
is just confusing. Use "clean" consistently when clearing settings
entries.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added BT alisa for dumping binary data to the logg.
The macro will be useful for BT as reworked settings supports r/w of
raw data - which will be widely leveraged in bluetooth storage alignment
to reworked settings.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the clock drift.
The compensation related ticker update failure in this case
can be safely ignored as new anchor point is used anyway
at the instant of the connection update.
Fixes#8796
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When we're acting as a Friend for an LPN, we need to consider all
elements of the LPN. The information of how many elements the LPN has
is provided in the Friend Request message, however until now the code
did not do anything with this information.
Fix the issue by tracking the number of elements for each LPN and
update the unicast address matching code to take this into account.
Fixes#11731
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit defines a default log level at bluetooth subsystem
level when module log level is not defined.
Prior to this change, the bluetooth subsystem would use
the firmware default log level.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
There is not an easy way to relate an application's user_data to a
connection. One way is to save a pointer to bt_conn in the
application's user_data array upon connection establishment.
Each connection related callback function will have to loop for all
user_data and compare the saved pointer to the passed bt_conn
pointer. This is inefficient if there are many callback activations
during the connection.
This change makes the internal bt_conn mapping function accessible to
applications in conn.h. The function name is changed to
bt_conn_index() to clearly indicate that the function returns an
index of an array.
Add an ASSERT to catch illegal parameter.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
When removing a peer from a CCC, it also needs to be removed from
the attribute `cfg`.
Not removing it would create a shortage of `cfg` that could
prevent new host to pair to the BLE device.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
CCC settings was not removed when unpairing all keys.
It means CCC settings were still present in flash and were
loading at bluetooth initialization time.
Loading these orphan CCC settings would fill `bt_gatt_ccc_cfg`
configurations and would prevent to add new CCC when pairing
with a new device.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Accourding to Bluetooth specification the Service Changed
Characteristic shall not have its handle changed once it has been
bonded, so this moves the GATT service to be the very first service
registered that way it is guaranteed that it won't change even if
device is flashed with a different configuration which end up changing
the handles after it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is related to b904ad387f.
This fixes checking ECDH related events in event mask.
If ECDH support is disabled in host, there is no need to check
if those are supported in the controller.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Some backends may actually contain the same key multiple times so the
code needs to check if there is already a ccc_cfg for an address before
attempting to use one that is unallocated.
Fixes#11409
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If there are no CCC to be stored the value should be set to NULL so it
is properly cleared otherwise calling settings_str_from_bytes will leave
str uninitialized which may cause a crash when attempting to load the
value.
Fixes#11564
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds Kconfig option to disable HCI ECDH support.
It will compile out ECDH related code, especially HCI event handlers.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Logging subsystem could take few extra bytes when enabled.
ECC thread stack has been unconditionally increased to
support it.
During my test, I noticed a usage of 1052 bytes when logging
subsystem is enabled.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
This makes it clear that only request need to set an opcode since they
require a error response in case it fails.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The comment was suggesting that write callback was reading and storing
buffer when in fact it should write to the attribute value.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Application may need to handle the write differently depending on the
write operation so this adds a flag called BT_GATT_WRITE_FLAG_CMD which
can then be checked by the callback, for instance one can respond with
BT_ATT_ERR_WRITE_REQ_REJECTED when that flag is not set which should
indicate to the client to use write command instead.
Fixes#11206
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Updated controller implementation to disallow disabling
initiator state using scan disable. But allow disabling an
already disabled scan state. Also, disallow enabling scan
state while in initiator state.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Consider invalid if the request pointer is NULL or the callback is NULL
or there is a request ongoing. This conditions would likely lead to a
crash and most likely there is some other bug involved like for example
the application queueing the same request multiple times.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When issuing LE Set Data Length Command host should not assume that
LE Data Length Change Event will be generated. From Core Spec 5.0:
"If the command causes the maximum transmission packet size or maximum
packet transmission time to change, an LE Data Length Change Event
shall be generated."
Change-Id: I17723b58ed4f390aa465db3f69126ee229871123
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
If master or application decided to switch connection parameters to
ones that meet pending parameters don't bother sending request
after 5 seconds timeout.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Experiments have shown that the probability of missing advertising
packets is significantly lower with 30ms scan window compared to 10ms
scan window. This is especially the case with advertisers using a 20ms
advertising interval, which in turn is perhaps the most common one
since it's the smallest allowed by the Bluetooth 5.0 specification.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
By default, CCC value is only stored to persistent memory during
BT disconnection. This commit adds an optional storing of CCC right
after it has been updated. This results in better robustness of
peripheral but increases system workqueue stack usage.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
The channels assigned to the controller are reordered so that the ones
previously used and now available for other purposes have continuous
numbers. When the controller can take advantage of the pre-programmed
PPI channels (when TIMER0 is used as the event timer), the now free
channels are 0-4, when it cannot, it is the channel 0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Several PPI channels in nRF5 family SoCs are pre-programmed with fixed
settings. A few of them can be used in the bluetooth controller instead
of the freely programmable ones that are used currently. This commit
makes such replacements where possible so that the universal channels
can be left available for other purposes.
This commit also removes macros used previously in calls to functions
enabling and disabling particular PPI channels (as it is sufficient
to use the BIT macro to set bits corresponding to the channel numbers)
to prevent such problems like the one introduces by commit
9d1ca9c390 (channel 18 changed to 17
but the related macro definition not updated).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The endif comment block is for CONFIG_BT_FIXED_PASSKEY not
CONFIG_SMP_FIXED_PASSKEY. Fix the comment to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
BT_LE_ADV_CONN_DIR_LOW_DUTY declares a local variable so it cannot go
out of scope, so instead of assigning in the scope of the if statement
this rework the code to mantain the declaration in the same scope it is
used.
Fixes#10570
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes mesh shell to register commands with the new shell subsystem
and stop using the legacy shell.
Fixes#11056
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With multiple devices on auto-connect list it is possible that while
having pending connection to device A, device B disconnects. In that
case host should not try to start scan (currently controller doesn't
support concurrent scanning and initiating).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This commit moves the BLE GATT Device Information service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and adds
a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Add support for exchanging both minimum and maximum
connection interval values in Connection Parameter Request
Procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fallback to L2CAP Connection Parameters Update Request if LL Connection
Update Request was rejected by remote device that has this marked as
supported in features. This can happen if procedure is supported only
by remote controller, but not enabled by host. This is connection
parameters update with iOS devices.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The code had somehow gotten corrupt (yet in a way that it compiles) so
that an intended if-branch was missing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will exclude GATT Client response handlers from compilation
if GATT Client support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix misspellings in Kconfig files that show up in the configuration
documentation (and make menuconfig screens).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix an integer overflow in the scheduling implementation
that calculates whether resources required for next radio
event be retained.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit optimizes access to RNG driver by taking advantage
of the data structures layout. As result, number of calls to RNG
driver is reduced.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
In Bluetooth 5 the definition of LE security mode 1, has changed.
LE Security Mode 1 level 4 requires authenticated LE Secure Connections
pairing with encryption using a 128-bit strength encryption key.
This also changes the behaviour when a security request and response
would end up with a security level that is lower than the one requested.
Before pairing would complete, and the link would disconnect with error
authentication failure. Instead a SMP will abort pairing with error code
authentication requirement, or encryption key size.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds new API fuction to update running advertising data.
It will remove the need of advertising restarting.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The bluetooth controller has been using the flag '-Ofast' to keep
within a real-time limit. There are two problems with this; firstly,
when a project should be optimized for size it is standard to use -O2,
not -Ofast.
Secondly, optimization flags have been deemed to be non-portable, so
instead of directly using "-Ofast" we should use the intent-macro
OPTIMIZE_FOR_SPEED_FLAG to ensure toolchain portability.
Testing has shown that we are still within the real-time limit when
changing from -Ofast to -O2. -Ofast is about 1us and 1% faster, but
increases the code size by 13kB (5% of the available flash on a
nRF51).
Since the slowdown is comparatively small compared to the code size
increase we have decided to use -O2 in place of -Ofast.
Other optimization combinations were also measured and their results
can be seen below:
-Ofast in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 138920 B 256 KB 52.99%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 45, 132.
-O2 in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 125840 B 256 KB 48.00%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 51, 133
-O3 in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 138920 B 256 KB 52.99%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 50, 132.
No extra CFLAGS for BLE and entropy driver (pragmas removed), using
CONFIG_SIZE_OPTIMIZATIONS=y
Memory region Used Size Region Size %age Used
FLASH: 120124 B 256 KB 45.82%
[bt] [ERR] isr_rx_conn: assert: '!radio_is_ready()' failed
No extra CFLAGS for BLE and entropy driver (pragmas removed), using
CONFIG_SPEED_OPTIMIZATIONS=y
Memory region Used Size Region Size %age Used
FLASH: 138004 B 256 KB 52.64%
[bt] [INF] encode_control: l: 6, 6, 7; t: 61, 51, 130.
NB: RAM usage differences were insignificant.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Connection complete event with error code can be received only for
central role and can be compiled conditionally.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds a possibility to reject incomming LE Connection request
due to insufficient authorization or encryption key size.
This is needed for qualification purposes
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds support for returning various return codes from
the channel accept callback.
This is needed for implementation of incoming connection
authorization for certification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename connection response results to map those that are defined
for BR.
BR: BT_L2CAP_BR_*
LE: BT_L2CAP_LE_*
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Convert the monitor protocol to a proper logger backend. This also
means that our log.h headerfile gets greatly simplified.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use irq_lock (same way as bt_hex does it) and increase the number of
static buffers to reduce the risk of reuse before a buffer gets
processed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This shell command was tied to bluetooth and the bluetooth shell and
also had messages all related to nordic ICs.
Make it generic and put it under drivers/flash/ so it can be included by
anyone and independently of bluetooth.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mkae sure that variable pointed by params is valid when passing it
as function argument.
Fixes#10587
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Improve the error feedback when calling bt_le_adv_start and inputting
too much data in the advertisement.
Error feedback before:
Bluetooth initialized
Advertising failed to start (err -22)
Error feedback after:
Bluetooth initialized
[bt] [ERR] set_ad: Advertising data does not fit in buffer
Advertising failed to start (err -22)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add option to disable legacy pairing and only use secure connection.
If legacy pairing was requested pairing will be denied with status
insufficient authenticated
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added implementation to avoid retransmitting NACK-ed Tx PDU,
to save on current consumption in retrying to transmit in
case peer device has no free buffer to receive the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection failed to be established regression
introduced by the commit 350c569aba ("Bluetooth:
controller: Avoid offseting to lldata").
As the Rx-ed PDU buffer is re-used to construct the
connection complete message towards HCI, the fields in the
Rx-ed PDU need to be backup for future use in the control
path. Here the channel selection bit is backup now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Connection Parameter Request Procedure implementation
to respond with sent interval_min and interval_max so that
certain peer devices dont reject the response as Invalid LL
Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds missed const modifier for addr pointer for
bt_le_set_auto_conn function
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Refactored the fix in the commit 685da02354 ("Bluetooth:
controller: Fix advertising random delay resolution calc")
to apply modulo in tick units before adding a tick.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bluetooth config dependencies where the definitions depend on other
definitions.
BT_RX_PRIO is not always defined in a controller only build.
BT_CTLR_TX_BUFFER_SIZE does not depend on BT_CTLR, but BT_LL_SW.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Calling bt_recv in the Bluetooth host Tx thread by the
controller implementation caused deadlock in combined host
controller builds when HCI LE Create Connection Cancel
generated the HCI LE Connection Complete or HCI LE Enhanced
Connection Complete events.
Controller's HCI implementation has been updated to place
the generated event into Rx FIFO to avoid the deadlock.
Relates to commit a59f544fb4 ("bluetooth: controller:
Handle non-priority events correctly")
Relates to #10314.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
bt_conn_disconnect removes device from autoconnect list and thus
should not be called from le_conn_update when timeouting pending
connection. Also auto connect flag needs to be check on connection
failure to make sure scan is restarted.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In commit d5836195d7 ("Bluetooth: controller: Increase advertising
random delay resolution"), the resolution of random_delay was
increased from 8-bit to 16-bit. Due to this switch the result
of HAL_TICKER_US_TO_TICKS() can now be a 0, which causes the following
crash:
***** Kernel OOPS! *****
Current thread ID = 0x200043f0
Faulting instruction address = 0x17914
Fatal fault in ISR! Spinning...
Let's make sure we don't pass a 0 to ticker_update() by increasing
the result of HAL_TICKER_US_TO_TICKS() by 1.
Signed-off-by: Michael Scott <mike@foundries.io>
Fix the default Tx buffers to 3. While the first Tx-ed
buffer generates the HCI Number of Completed Packets Event,
the controller needs to have 2 additional Tx buffers queued
so that the second Tx PDU has the More Data (MD) bit set so
as to have the connection event to continue to transmit any
additional Tx buffers that the Host will enqueue in the same
connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>