As part of devicetree update to new devicetree.h We Need to convert
as use of DT_ARM_CORTEX_M4F_CLOCK_FREQUENCY to
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency) in the hal_ti for the
msp432p4xx SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update STM32WB HCI lib support to version 1.5.0.
Additionally provide a doc section to clarify compatibility
with stm32wb wireless co-processor binaries.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Start SOCKS5 proxy in the net-tools Docker image and run MQTT TLS
tests with SOCKS enabled. Since the MQTT TLS server is already
running as of the previous test, start only the danted daemon.
Rely on mosquitto MQTT port being handled by the Docker image
configuration file instead of specifying it on the command line.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Updating west.yml to point a fix to include proper time.h header in
the HAL. This should fix an issue where clock_gettime() is not
correctly called due to recent change to make it into a system call.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit updates `west.yml` to point to the `hal_atmel` commit that
fixes the incorrect GMAC priority queue register offsets for SAMV71.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update manifest to a version of EDTT that supports receiving this
response in the unknown command response test (HCI/GEV/BV-01-C).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
This commit updates the west.yml to point to the CMSIS module commit
that updates the CMSIS version to 5.7.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the west.yml to point to the commit that adds the
CMSIS-Core(A) and defines the configurations to enable it, in
preparation for the AArch32 Cortex-A architecture support in Zephyr.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr i2c interface. It leverages heavily from the existing mcux lpi2c
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update hal_atmel to fix wrong __MPU_PRESENT definition.
see zephyrproject-rtos/hal_atmel/pull/10
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Update the hal_nordic module revision so that the nrf_radio_802154
does not use the CONFIG_ENTROPY_NAME symbol which is no longer used
in the Zephyr tree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use <arch/arm/aarch32/cortex_m/cmsis.h> include instead of <zephyr.h> to
get access to Cortex-M CMSIS API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add CSMA CA capability for the `ieee802154_nrf5` radio driver along with
appropriate implementation in the `nrf5_tx` function.
Introduce 802.15.4 radio driver with CSMA/CA support enabled. Add help
text, mentioning a list of peripherals occupied by the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
PR https://github.com/zephyrproject-rtos/mcuboot/pull/8 was mistakenly
merged instead of pushed, which made the last 4 commits of zephyr's
mcuboot divergen in SHA with respect to the upstream ones.
In order to preserve the status of the zephyr mcuboot repo as an
exact mirror of the upstream one, a snapshot has been taken to preserve
the current SHA (0f4463caec3c3a8fac1350d0d6dfbee678a8ce06) and then the
master branch has been reset to the upstream equivalent
(7e7b4ad1999bf148f88059195f8d2e1d3dccf190). This commit switches the
pointer to the latter, but the mcuboot code itself is identical.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include build assert macros rework.
Update pip requirements by cbor package required by MCUBoot since
https://github.com/JuulLabs-OSS/mcuboot/pull/674 was merge.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Temporary point hal_nordic to the revision
59d33bc1dd59df14feb26f0010d527c1ea7a89e8
where the changes are present (before it's updgraded),
so the CI can proceed.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
We can build the openamp library configured with VirtIO master
support, VirtIO slave support, or both. By default both master
and slave code is enabled. We can reduce code footprint by only
build master or slave as needed.
Expose Kconfig options for Master & Slave and set them accordingly in
the sample.
Here's the code reduction we see:
For the total image we see as 1260 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 30308 B 256 KB 11.56%
FLASH [Master only] : 29048 B 256 KB 11.08%
On the remote side we see a 828 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 11564 B 64 KB 17.65%
FLASH [Slave only] : 10736 B 64 KB 16.38%
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update introduces changes to TinyCBOR CMakeList.txt that removes
it from Zephyr interface libraries.
This also fixes problem with TinyCBOR include paths not being added into
compilation, unless MCUMGR has also been selected.
Addresses GH issue: #23324
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This updates the Xtensa HAL revision to latest master,
which includes updating the HAL to version 12.08, and
making it a named module.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit updates the hal_atmel entry in the west.yml to pull in the
SAME70 DFP version 2.4.166.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Introduce an update in the mbedTLS configuration, which is needed after
the OpenThread update. The default mbedTLS CMake configuration was
changed upstream, which resulted in broken cryptography in Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update MCUboot SHA to take into account the
update of the nRF51 board target name.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
OT revision was by mistake set to a wrong commit. Now it should
point to the latest merge commit (up to the upstream commit ab9c0a4).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This reverts commit 39d5827e97.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reverts commit 36f199160b.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Temporary point mcuboot to JuulLabs-OSS/mcuboot#682
to check if mcuboot can be upgraded.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There's a circular dependency with hal_nordic while
merging build assert macros.
Point hal_nordic to PR where the changes are present
so that CI can proceed.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This PR provides changes that are required after replacing Tinycbor
with copy of source code from mynewt-core.
The Tinycbor has been replaced with mynewt-core version to reduce
maintenance effort; by replacing it the Zephy specific changes have been
reduced to small patch over mynewt codebase.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The new version of mcumgr adds a few new Kconfig values, so
this commit adds them on Zephyr side.
This commit also updates west.yml so it points to the latest
changes on mcumgr's repo.
Signed-off-by: Miguel Azevedo <miguellazev@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the hal_nordic module revision, to apply the following changes:
nrfx_config: Fix translation of symbols for _S or _NS only peripherals
For peripherals with only one type of access available (either secure
or non-secure), the common symbol translation scheme cannot be used
as it leads to mapping to non-existing symbols (e.g. NRF_FICR_NS).
Instead, use fixed translations for these symbols (e.g. NRF_FICR to
NRF_FICR_S, only for secure images).
nrfx_config: Add missing _S/_NS symbol translations for nRF5340/nRF9160
Add translations of names with _S and _NS suffixes for peripheral
access symbols that are available for a given chip but were not used
so far in any nrfx HAL or driver, to make the lists of translations
complete and consistent.
This commit corrects also the translation of NRF_I2S symbol for nRF5340
whose name for this SoC contains also the index 0 (so it needs to be
handled similarly like NRF_PDM0 is).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update hal_nordic's revision, so that NRFX_ASSERT uses __ASSERT_NO_MSG
directly, not through the assert macro that comes from from libc,
as the definition of the latter might be different when some specific
libc version is used, and this could generate troubles.
Replace also uses of assert() with __ASSERT_NO_MSG() in nrfx driver
shims that use this macro without including the corresponding header
file (i.e. that implicitly rely on assert.h being included from
nrfx_glue.h, which is no longer the case).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This includes the following changes:
- modules: Fix bugs in ECIA and PECI headers
- modules: Fix bug in MEC1501 TACH header
- mec1501: fix bits for setting 10-bit ADC resolution
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For passing the EDTT tests pass/fail criteria needs to be updated,
which is done starting with the revision referenced in the updated
manifest
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Those checks are now being run using GH actions. ci-tools was changes to
support excluding modules and stopping them from reporting pending
status.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating west.yml to point to fixed versions of SempahoreP_create/
SemaphoreP_construct that correctly initialize the semaphore count.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Since zephyrproject-rtos/zephyr#20375
Need to enable USB by the mcuboot code explicitly.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Modifying west.yml to point to the TI HAL repo updated with the RF
driver and associated changes in the DPL.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update to the latest merged commit in the module and remove reference to
pull request which was merged by mistake.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Upgraded mcuboot to version which have following issue
fixed:
Redundant 'source "$(ZEPHYR_BASE)/Kconfig.zephyr"
in 'boot/zephyr/Kconfig'
Within this version upgrade the default swap algorithm for nRF devices
was changed to `move swap` instead of `swap using scratch`.
Mcuboot start using new non-deprecated GPIO labels
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Net-tools revision 4bff01084d225996e4aae84b98be5969e2f9f33d
is needed for running network sample test scripts.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Get latest EDTT version, which includes a fix for
LL/CON/MAS/BV-23-C regarding the feature set bitmask
check.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update revision of the hal_nordic module, so that `uint32_t` arguments
are casted to `unsigned long` in nrfx log messages.
This is done to avoid warnings about providing an argument of type
`uint32_t` (which is `unsigned int`) where a `long unsigned int` one
is expected.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The Silicon Labs EFM32 Jade Gecko MCU includes:
* Cortex-M3 core at 40MHz
* up to 1024KB of flash and 256KB of RAM
* multiple low power peripherals
This is basically the same as the EFM32 Pearl Gecko, but with an ARM
Cortex-M3 core instead of a Cortex-M4F.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds this commit, needed to avoid a false positive warning when running
pylint on genrest.py:
The KconfigCheck test in check_compliance.py uses
scripts/kconfig/kconfiglib.py from Zephyr, and nothing else needs
Kconfiglib to be installed from PyPI either.
Installing the old 10.30.0 version of Kconfiglib makes pylint
generate a warning-turned-error for genrest.py, because it uses a
the suppress_traceback parameter to Kconfig.__init__(), which was
added later.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Zephyr-specific files in mcux break when the drivers subdirectory is
no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Zephyr-specific files in mcuboot break when the drivers subdirectory
is no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A Zephyr-specific file breaks when the drivers subdirectory is no
longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
ELM FatFS implementation supports LFN, enabled via ffconf.h
configuration file. Additionally, code page (character set),
max file name length, and memory mode (LFN working buffer location)
are configurable options closely related to LFN.
Without LFN filenames are restricted to 8.3 filename format.
Add kconfig options to expose following FatFS configurations:
enable LFN, specify max filename length, specify code page
(character set), specify LFN working buffer location.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
NFFS support repository reference was removed
as unneeded anymore by removal of NFFS support in the codebase.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Include the CANopenNode CANopen stack as a module in Zephyr.
CANopenNode is licensed under the Apache-2.0 license.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update hal_stm32 to new version including latest STM32Cube packages.
Includes the following:
- stm32cube: update stm32wb to version V1.3.0 (commit 374333f)
- stm32cube: update stm32g0 to version V1.3.0 (commit e209cea)
- stm32cube: update stm32f0 to version V1.11.0 (commit 08833e5)
- stm32cube: update stm32f3 to version V1.11.0 (commit 2a412a4)
- stm32cube: update stm32h7xx cube version to V1.5.0 (commit a08d1dc)
- stm32cube: update stm32f2xx cube version to V1.8.0 (commit b4226d5)
- stm32cube: update stm32f1xx cube version to V1.8.0 (commit a515c67)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Gets these commits in:
check_compliance.py: Detect refs to undef. symbols in samples and
tests
Extend the check for references to undefined Kconfig symbols to also
detect undefined symbols in samples and tests.
Samples and tests were skipped due to using separate Kconfig trees,
which hid the symbols defined in them. Work around it by grepping
for Kconfig symbol definitions in them instead.
Keep properly parsing the main Kconfig tree, as it's needed to see
symbol names that are stitched together with the Kconfig
preprocessor.
------------------------------------------------------------------
check_compliance.py: Detect bad header comments and other nits
Add a generic kitchen-sink Nits test for various minor nits that
aren't already covered by tools like checkpatch.pl and pylint. So
far checks this:
- Header comments in Kconfig files
- Missing newlines at the end of various source files (probably a
bad editor setting)
- Leading/trailing blank lines in files
------------------------------------------------------------------
check_compliance.py: Kconfig: Flag redundant $ZEPHYR_BASE in
'source'
'source's like
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
can be simplified to
source "Kconfig.zephyr"
since $srctree already points to the Zephyr root.
Flag it in the Nits test.
This also avoids absolute paths showing up in some places.
------------------------------------------------------------------
check_compliance.py: Improve error reporting for Git commands
Similar improvements to
https://github.com/zephyrproject-rtos/zephyr/pull/21577. No custom
potentially-missing working directory is used here, but always
including the exception message still feels more robust.
Use err() instead of sys.exit() in git(), and have it include the
command name, which is helpful in logs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
