The KE1xF SoC family SIM unit differs from the other Kinetis family
SoCs. Add a unique compatiable and binding for it.
Fixes#18160
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the module revision so that the following commits become
effective:
* nrfx_config: Use common mappings of Kconfig options to nrfx macros
* nrfx_config: Unify the way of enabling instances in nrfx drivers
* nrfx_config: Add missing mappings of Kconfig option symbols
* CMakeLists: Add missing inclusions of driver implementation files
The above changes require a minor correction in the nrf91/soc.h file,
so it is also modified in this commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds HAS_SWO selections to all STM32 SoCs supporting Serial
Wire Output via the Trace Port Interface Unit (TPIU).
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This is required to get the watchdog test and sample working since the
required wdt device name macro is generic there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There are only 178 interrupt lines on CC3220SF. Hence we should not set
NUM_IRQS to a value exceeding that value. We are changing it to 178.
Fixes#18593
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move the tail include file outside the extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
'timeout' needs to be a signed variable, so that the
check for less-than-zero is able to result to true (if
the timeout actually expires). Addresses the coverity
issue [Coverity CID :203493] reported in #18379.
Fixes#18379.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The HAL/SDK code for imx6sx utilizes floating point support in
CCM_ANALOG_GetPllFreq function which is utilized by drivers to determine
clock information. As such we should enable hardware FP support by
default so we don't get pure soft-float emulation and pull in a bunch of
extra code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support for the Zynq UltraScale+ MPSoC as a qemu based
platform for Cortex-R based testing. This SoC only supports an
interrupt controller and serial port for limited testing.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use address based defines in the dts_fixup.h instead of DT_INST_ based
ones. The DT_INST_ will not get us the consistent mapping that is
needed (as we should assume the order of DT_INST_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In nRF9160 the reset pin is a dedicated one, it cannot be configured
as a regular GPIO pin, so this option should not be presented to users
building for this SoC, to not generate confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use clock specified in the device tree for obtaining the source clock
frequency for the pwm_mcux_ftm driver instead of relying on having an
NXP Kinetis MCG clock available in all SoCs supporting FlexTimer (FTM)
modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Perform OTP override when selecting 32Khz internal oscillator
to ensure 32KHz is enabled.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
i.MX RT10XX processors have four eFlexPWM modules, each containing
four 2-channels PWM submodules.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Changes to MEC1501 HAL for eSPI changed loop constant used by SoC
code initializing the ECIA registers. Fixed by using HAL constants
that are invariant.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
pinmux: Add the relevant definition of the spi3 pin
dts: Fix a bug, spi3 does not have a label
soc: Supplement spi3 related definition
Signed-off-by: Findlay Feng <i@fengch.me>
Add a hidden Kconfig option indicating that a given SoC is equipped
with the IEEE 802.15.4 capable radio so that the corresponding driver
configuration can depend on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Because NXP MPU's regions are dynamically enabled/disabled, USB
device's access maybe restricted when switching out of a task.
Background DMA transfers to/from RAM may happen during MPU region
reconfiguration or core idling.
Enabled USB (Kinetis MPU Master 4) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The SoC clock init code for USB was using a deprecated DTS define.
Switch to using the non-deprecated form.
Fixes: #17772
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The uart_stellaris driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_msp432p4xx driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_pl011 driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The log_backend_swo used system clock frequency
as a base for SWO clock calculation. This commit
corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used timer clock frequency
as a system clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
