It Need to start using DT_FLASH_SIM_xxx labels after sim_flash was
un-chosen as zephyr,flash.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The native_posix timer driver was still using the
legacy timer API.
Replace it with a new version, which is aligned with
the new kernel<->system timer driver API,
and which has TICKLESS_CAPABLE support
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
TWI and TWIM used single static variable for multiple instances.
It would cause problems in case of multiple instances of peripheral.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The nRF 802.15.4 radio driver should not include nRF52840 header
directly, but rely on soc.h instead. Otherwise, it will not work with
different SoCs supporting 802.15.4.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree and its setting
for random/unique addresses.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Added flags for controling detection of setting alarm to late.
Updated drivers to return -ENOTSUP when new option is requested.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Issue faced while running bluetooth sample (peripheral, central, ...)
on stm32wb55rg with the latest zephyr version
Signed-off-by: Roger N'Guessan <roger.nguessan@st.com>
Add clock support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add flash support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Cleanup around USB_NRFX_EVT_QUEUE_SIZE option.
Add value range for USB_NRFX_EVT_QUEUE_SIZE to Kconfig.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use REQTYPE_GET_DIR and REQTYPE_GET_TYPE macros from
USB subsystem instead of specially introduced.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
flash_erase cannot erase a page from the STM32xx SOC flash. It seems
that the erase wait time is not enough and against to what the SOC's
datasheet states. As a result this patch doubles the wait time.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Check the device state before nrfx_usbd_disable and
nrfx_usbd_uninit. Otherwise it may lead to an ASSERT
inside the HAL driver.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Do not use NRF_USBD_EP_NR_GET in ep_is_valid because
it masks the higher nibble. Although this behavior is valid
to get an index from an endpoint, it is not suitable to check
if the address is incorrect, such as: 0x11.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Check if the buffer size is not empty before spi transceive and buffer's
data processing. This fixes the need to slow down MCUs to 16MHz when
using BlueNRG-MS chips.
Tested samples : Beacon, Central, Peripheral
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Protect gpio_configure function in dual core context.
This operation is not needed for other fuctions of the api:
* init
* read
* write
Protecting gpio_configure also protects access to
interrupt_controller IP.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32H7, in Dual core configuration, we restrict configuration
access to CM7 core. CM4 can access to API but not the init part of
the driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide basic clock control driver for STM32H7.
Bus clock activation is done through CM7 and CM4 common registers
so we don't have to care to the CPU Id before accessing.
Accesses are not protected for now. Only possible configuration
is system clock source set to HSE driven PLL.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support to STM LSM6DSO 6-axis IMU sensor driver.
This driver supports communication with device though both
I2C and SPI bus and both polling and drdy trigger mode.
This driver supports also the sensorhub mode with the possibility
to connect a maximum of two external devices, typically a
magnetometer and an environmental sensor, currently selected among
following devices: lis2mdl magnetometer, lps22hh or lps22hb
pressure and temperature sensors, HTS221 humidity sensor.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support to STM LPS22HH pressure and temperature sensor.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
