The unit tests needed to enable the hidden Kconfig
BT_BAP_BASE. Instead of adding an additional Kconfig for this,
just enable one of the roles that enable it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There were a couple of controller tests outside the
controller directory which have been moved there to
simplify the structure a bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- add overlays and kconfigs files for nucleo_u083rc and
stm32u083c_dk boards.
- update testcase.yaml for CI
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add `DT_INST_NUM_IRQS()` to get the number of interrupt lines
of the current `DT_DRV_COMPAT`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This particular qemu platform seems to run into a strange TLB exception
with unclear cause. Disable the test suite on xtensa qemu for the time
being.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
It appears some strangeness occurs around the consume semaphore today
that causes a TLB exception on qemu_xtensa_dc233. Unclear *why* just yet
but this fixes things in CI today.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This allows to run the test 'chan_blen_transfer' and 'loop_transfer' on
the sim3u1xx_dk board.
The functionality tested in `chan_link_transfer` and `scatter_gather` is
not (yet) supported by the Si32 DMA driver, and those tests therefore
not enabled.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This was seen in CI
START - test_cycle_ready_CC
Assertion failed at ...tests/net/conn_mgr_monitor/src/main.c:262:
cycle_ready_ifaces: (stats.conn_count_gen not equal to 1)
NET_EVENT_L4_CONNECTED should be fired when connectivity is gained.
FAIL - test_cycle_ready_CC in 0.015 seconds
As the event wait timeout is very short (1ms) by default, increase
it to 10ms so that we will not miss the event.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix flexspi xip configuration issue regarding code relocation
due to the order of kconfig defaults being sourced
The flexspi setup was not being relocated to an on chip location
Also remove rt1060 conf file in flash common test which changes the
code relocation location to RAM, just keep as ITCM for all M7 which
as of now all have ITCM from NXP with flexspi.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add and verify against reference descriptors a High-Speed only 192 kHz
24-bit stereo headphones with explicit feedback UAC2 instance.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate and test both Full-Speed and High-Speed descriptors against
reference values. Verify that IAD, interface and endpoint descriptors
are not shared between Full-Speed and High-Speed descriptor sets because
the number of non-UAC2 interfaces can be different at different speeds
and thus the assigned interface numbers and endpoint numbers can differ.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate full and high speed descriptors based on UAC2 instance
properties. Fail the build if an instance does not have speed properties
or if the instance with given speed property exceeds the bandwidth
available at the selected speed.
Remove obsolete no longer used macros to determine offsets inside
complete UAC2 descriptors blob. Only speed-specific descriptors arrays
are supported.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add full-speed property to build all configuration and to UAC2
descriptor tests because this is what the tests were written for
(UAC2 class originally was full-speed only and there were no speed
properties available).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a test to check the proper support of ELF init arrays, using
the new llext_bootstrap function in place of llext_entry in the
LLEXT test suite.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit renames the perm_setup callback to test_setup and provides
the extension as an additional parameter. It also adds a test_cleanup
callback that is called after each test completes.
Setup and cleanup functions are now called regardless of whether
CONFIG_USERSPACE is enabled or not.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch refactors the macro for test case definition to simplify the
generic case. By using variable macro arguments and default-0 fields,
the most common case does not require arguments at all and tests that
have special requirements can be defined with only the necessary fields.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add support for flashing the Adafruit Feather nrf52840 Express
using UF2 over USB.
Also standardise on using the UF2 variant, so add a non UF2 variant
of the Sense board, so it can be flashed using the SWD headers.
Created flash dtsi files for both SWD and UF2. These are actually identical
for many other boards and should probably be moved to common in future.
Signed-off-by: Jacob Winther <jacob@9.nz>
Update both versions of adafruit feather nrf52840 to be variants rather
than separate boards. The aim is to provide a more consistent approach
and to remove some unnecessary Kconfig redundancy.
Signed-off-by: Jacob Winther <jacob@9.nz>
Define DMA channels for MAX32 boards and add a new test case so that
DMA-based SPI transfers are tested.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Add all the necessary files to add apds9253 Avago sensor driver.
Sensor available at https://docs.broadcom.com/doc/APDS-9253-001-DS
Signed-off-by: Margherita Milani <margherita.milani@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Some events needs to be handled with a very low latency constraint.
If the system is in deep sleep, exit latency from this low level state
exceeds sometimes the maximum latency constraint of these events.
Before suspending the system, select which events is happening sooner,
kernel events or normal events.
CPU will be up just before the next event occurs taking into account the
exit latency of the current power state
Change also the policy event API to take as argument absolute time in HW
cycles instead of time in us
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Add support for running the audio BSIM tests on the
nrf5340bsim board.
This expands the tests we run in CI.
To support all tests with the hci_ipc sample for the netcore,
it is updated to support a bit more while still fitting on the
netcore on the nRF5340 series.
The behavior of advertisement seems to differ a little bit,
which required the bap_unicast_server_test.c to update how it
restarts advertisements.
Two broadcast tests that are passing on the nRF52 BSIM is also
failing due an assert. This should be investigated at a later
time.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the network buffer tests to tests/lib/net_buf as their implementation
now lives outside of the networking subsystem.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the net_buf implementation from the networking subsystem to a library
as they have no dependency on the networking subsystem.
Network buffers are used in subsystems outside of networking
(e.g. Bluetooth, USB).
Fixes: #36374
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- Update `MAX_IRQ_PER_AGGREGATOR` to 1024 to match with the
devicetree
- Update `2ND_LEVEL_INTERRUPT_BITS` to 11 bits to
be able to encode the L2 IRQs.
- Update `NUM_IRQS` to 1036 (L1 has 12, L2 has 1024)
Update the `MAX_IRQ_PER_AGGREGATOR` config in testcase
accordingly, so that it won't overflow the configured bits.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add test for message demultiplexer from STPv2 data stream generated
by STMESP frontend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add test which validates behavior of the UART driver when there
are errors on the receiver line.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Allow application to register certain HTTP request headers to be stored
by the server. These stored headers can then be accessed from a dynamic
resource callback.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
