This case fails to build on boards having APIC TSC timer enabled.
This change is needed after moving APIC TSC timer support from
apic_timer.c to apic_tsc.c.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
- Add CONFIG_SHELL_PROMPT_UART to the prj.conf file.
- Ensure the ztest_params test is flashed/run only once per Pytest session.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Make sure it's possible to register IPv4/6 addresses on an offloaded
interface. Add an extra build configuration to make sure it's also
possible when native IP stack is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add test cases for dynamic GET/POST, where the payload is transferred
across more than one call to the dynamic resource callback.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
After introduction of struct http_response_ctx, the dynamic resource
data buffer is no longer needed for transferring data between the
application callback and the server. It is therefore removed to avoid
unnecessary copying of data.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add tests covering new method of providing a response for dynamic
resources.
Tests cover the application sending response codes and headers,
overriding "default" headers, and sending various combinations of
headers and body data. Each case is tested for HTTP1 & HTTP2, both POST
and GET methods.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Allow the application to send headers and response codes from a dynamic
resource callback by filling out a response context structure.
This also allows simple requests to be completed in a single execution
of the callback, by setting the final_chunk flag.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Added helper functions to set and get assisted listening
stream values for codec capabilities and codec configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add broadcast support for the CAP acceptor sample.
This adds new sample-specific Kconfig options to help
select the right Kconfig options based on whether
unicast, broadcast or both is being used.
The babblesim implemented for the broadcast has been expanded
to verify that the CAP acceptor receives the broadcast audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the case that a broadcast sync fails for any reason, we need to
set the BIS_Sync value for all subgroups to 0xFFFFFFFF
(BT_BAP_BIS_SYNC_FAILED) as per the BAP spec.
This commit adds a new define for this and modifies
both the scan delegator and broadcast sink to support this.
The change is validated by a modification to the broadcast
assistant test that verifies that the value is set in the
case of an invalid broadcast code (which indicates a
failed BIG sync).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Up until now, the `__thread` keyword has been used for declaring
variables as Thread local storage. However, `__thread` is a GNU
specific keyword which thus limits compatibility with other
toolchains (for instance IAR).
This PR intoduces a new macro `Z_THREAD_LOCAL` which expands to the
corresponding C11, C23 or C++11 standard keyword based on the standard
that is specified during compilation, else it uses the old `__thread`
keyword.
Signed-off-by: Daniel Flodin <daniel.flodin@iar.com>
The TLC5971_STRIP config enables if the "ti,tlc5971" node exists.
Also, removing the setting that explicitly enables in the
`tests/drivers/build_all/led_strip` test.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Modify the test to spawn a user thread if it is running
with userspace enabled. This allows testing coredump when
the crashing thread is a user thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Buffer data was being stored in cacheable memory for
the MIMXRT1010_EVK, the caching is not handle in these
test and cause mimxrt1010 to fail, this commit moves the
memory region to DTCM and in some cases lowers the size
of the DATA Buffer since it won't fit in DTCM for MIMXRT1010_EVK
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
For code clarity, remove unnecessary `return` statements
in functions with a void return type they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
1. kenistis dspi does support rx and tx with different size,
so skip the tx_bigger test.
2. dspi dma need internal alignment and 8192 bytes are too
many for k64, so reduce to 1440 bytes
fixing: #77010
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The current `K_THREAD_STACK_DEFINE` only create a single stack
shared by all the busy threads. This is causing the application
to crash when there are more than 2 cores in the system.
We should use `K_THREAD_STACK_ARRAY_DEFINE` to create an array
of stacks instead.
Updated the testcase to test up to 8 cores using
qemu_riscv64_smp
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The native_sim has already been added to the test cases of
`drivers.ieee802154.build.external` is not being appropriately
processed because there is no corresponding overlay.
Create an overlay as an alias of native_posix.overlay.
Also, add the native_sim/native/64 platforms in the same way.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryption, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit re-enables the following platforms for the
`kernel.common.stack_sentinel` test:
* `hifive1`
* `m2gl025_miv`
These platforms working correctly after Renode was upgraded to 1.15.2 in
the CI.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Ethernet board variant was missed in commit 138e9591f8 (tests: net:
wifi: exclude RW612 based boards), but is the sole variant that actually
was running this test. Exclude this variant only, since it cannot build
this test due to requiring binary blobs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use `test_adc` in io-channels to be consistent in whole
tests/drivers/build_all/sensor/adc.dtsi file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Rename the volume flag field from the generic "flags"
to "vol_flags" as the generic "flags" will be used for
other values in a future commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
test_dependent() was changed to test_entry() but one location was
missed - in a warning message string. Fix it too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
