tests: net: bridge: Update the bridging tests

Make sure that tests work after overhaul.

Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>

tests/net/bridge/prj.conf

@@ -10,3 +10,6 @@ CONFIG_NET_PKT_RX_COUNT=20
 CONFIG_NET_BUF_RX_COUNT=20
 CONFIG_NET_BUF_TX_COUNT=20
 CONFIG_ZTEST=y
+CONFIG_NET_ETHERNET_BRIDGE_ETH_INTERFACE_COUNT=3
+CONFIG_NET_IF_MAX_IPV6_COUNT=4
+CONFIG_NET_IF_MAX_IPV4_COUNT=4

tests/net/bridge/src/main.c

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2021 BayLibre SAS
+ * Copyright (c) 2024 Nordic Semiconductor
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -21,6 +22,8 @@ LOG_MODULE_REGISTER(net_test, NET_LOG_LEVEL);
 #include <zephyr/net/net_if.h>
 #include <zephyr/net/ethernet.h>
 #include <zephyr/net/ethernet_bridge.h>
+#include <zephyr/net/virtual.h>
+#include <zephyr/net/promiscuous.h>
 
 #if NET_LOG_LEVEL >= LOG_LEVEL_DBG
 #define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
@@ -28,6 +31,8 @@ LOG_MODULE_REGISTER(net_test, NET_LOG_LEVEL);
 #define DBG(fmt, ...)
 #endif
 
+static struct net_if *bridge;
+
 struct eth_fake_context {
 	struct net_if *iface;
 	struct net_pkt *sent_pkt;
@@ -173,6 +178,15 @@ static void iface_cb(struct net_if *iface, void *user_data)
 			fake_iface[if_count++] = iface;
 		}
 	}
+
+	if (net_if_l2(iface) == &NET_L2_GET_NAME(VIRTUAL)) {
+		enum virtual_interface_caps caps;
+
+		caps = net_virtual_get_iface_capabilities(iface);
+		if (caps & VIRTUAL_INTERFACE_BRIDGE) {
+			bridge = iface;
+		}
+	}
 }
 
 static int orig_rx_num_blocks;
@@ -260,7 +274,7 @@ static void _recv_data(struct net_if *iface)
 	ret = net_pkt_write(pkt, data, sizeof(data));
 	zassert_equal(ret, 0, "");
 
-	DBG("Fake recv pkt %p\n", pkt);
+	DBG("[%d] Fake recv pkt %p\n", net_if_get_by_iface(iface), pkt);
 	ret = net_recv_data(iface, pkt);
 	zassert_equal(ret, 0, "");
 }
@@ -284,24 +298,24 @@ static void test_recv_before_bridging(void)
 	check_free_packet_count();
 }
 
-static ETH_BRIDGE_INIT(test_bridge);
-
 static void test_setup_bridge(void)
 {
 	int ret;
 
 	/* add our interfaces to the bridge */
-	ret = eth_bridge_iface_add(&test_bridge, fake_iface[0]);
+	ret = eth_bridge_iface_add(bridge, fake_iface[0]);
 	zassert_equal(ret, 0, "");
-	ret = eth_bridge_iface_add(&test_bridge, fake_iface[1]);
-	zassert_equal(ret, 0, "");
-	ret = eth_bridge_iface_add(&test_bridge, fake_iface[2]);
+	ret = eth_bridge_iface_add(bridge, fake_iface[1]);
 	zassert_equal(ret, 0, "");
 
-	/* enable tx for them except fake_iface[1] */
-	ret = eth_bridge_iface_allow_tx(fake_iface[0], true);
+	/* Try to add the bridge twice, there should be no error */
+	ret = eth_bridge_iface_add(bridge, fake_iface[1]);
 	zassert_equal(ret, 0, "");
-	ret = eth_bridge_iface_allow_tx(fake_iface[2], true);
+
+	ret = eth_bridge_iface_add(bridge, fake_iface[2]);
+	zassert_equal(ret, 0, "");
+
+	ret = net_if_up(bridge);
 	zassert_equal(ret, 0, "");
 }
 
@@ -318,9 +332,6 @@ static void test_recv_with_bridge(void)
 		/* give time to the processing threads to run */
 		k_sleep(K_MSEC(100));
 
-		/* nothing should have been transmitted on fake_iface[1] */
-		zassert_is_null(eth_fake_data[1].sent_pkt, "");
-
 		/*
 		 * fake_iface[0] and fake_iface[2] should have sent the packet
 		 * but only if it didn't come from them.
@@ -328,6 +339,7 @@ static void test_recv_with_bridge(void)
 		 */
 		for (j = 0; j < 3; j += 2) {
 			struct net_pkt *pkt = eth_fake_data[j].sent_pkt;
+			struct net_eth_hdr *hdr;
 
 			if (eth_fake_data[j].iface == fake_iface[i]) {
 				zassert_is_null(pkt, "");
@@ -338,7 +350,7 @@ static void test_recv_with_bridge(void)
 			zassert_not_null(pkt, "");
 
 			/* make sure nothing messed up our ethernet header */
-			struct net_eth_hdr *hdr = NET_ETH_HDR(pkt);
+			hdr = NET_ETH_HDR(pkt);
 
 			zassert_equal(hdr->dst.addr[0], 0xb2, "");
 			zassert_equal(hdr->src.addr[0], 0xa2, "");
@@ -356,24 +368,46 @@ static void test_recv_after_bridging(void)
 {
 	int ret;
 
+	ret = net_if_down(bridge);
+	zassert_equal(ret, 0, "");
+
 	/* remove our interfaces from the bridge */
-	ret = eth_bridge_iface_remove(&test_bridge, fake_iface[0]);
+	ret = eth_bridge_iface_remove(bridge, fake_iface[0]);
 	zassert_equal(ret, 0, "");
-	ret = eth_bridge_iface_remove(&test_bridge, fake_iface[1]);
+	ret = eth_bridge_iface_remove(bridge, fake_iface[1]);
 	zassert_equal(ret, 0, "");
-	ret = eth_bridge_iface_remove(&test_bridge, fake_iface[2]);
+	ret = eth_bridge_iface_remove(bridge, fake_iface[2]);
 	zassert_equal(ret, 0, "");
 
+	/* If there are not enough interfaces in the bridge, it is not created */
+	ret = net_if_up(bridge);
+	zassert_equal(ret, -ENOENT, "");
+
+	eth_fake_data[0].sent_pkt = eth_fake_data[1].sent_pkt =
+		eth_fake_data[2].sent_pkt = NULL;
+
 	/* things should have returned to the pre-bridging state */
 	test_recv_before_bridging();
 }
 
+/* Make sure bridge interface support promiscuous API */
+ZTEST(net_eth_bridge, test_verify_promisc_mode)
+{
+	int ret;
+
+	ret = net_promisc_mode_on(bridge);
+	zassert_equal(ret, 0, "");
+}
+
 ZTEST(net_eth_bridge, test_net_eth_bridge)
 {
+	DBG("Before bridging\n");
 	test_iface_setup();
 	test_recv_before_bridging();
+	DBG("With bridging\n");
 	test_setup_bridge();
 	test_recv_with_bridge();
+	DBG("After bridging\n");
 	test_recv_after_bridging();
 }
 

tests/net/bridge/testcase.yaml

@@ -9,6 +9,8 @@ tests:
     extra_configs:
       - CONFIG_NET_IPV4=n
       - CONFIG_NET_IPV6=n
+      - CONFIG_NET_CONFIG_NEED_IPV4=n
+      - CONFIG_NET_CONFIG_NEED_IPV6=n
     platform_exclude:
       - mg100
       - pinnacle_100_dvk