This commit adds new tests for verifying the functionality of the board
and SoC extension feature.
It does so by defining:
- A new CPU cluster on an existing SoC
- Two new board variants on top of an existing board
The new board variants are defined on top of the existing `native_sim`
board, so that the following native_sim board targets are available for
the test.
Existing board targets:
- native_sim/native
- native_sim/native/64
Extended board targets:
- native_sim/native/one
- native_sim/native/64/two
The new CPU cluster is defined for the existing `an521` SoC.
Existing CPU Clusters on an521:
- cpu0
- cpu1
New CPU Cluster:
- cputest
For SoC tests the mps2 board is used.
This means that for testing, the following board targets using the an521
SoC are:
- mps2/an521/cpu0
- mps2/an521/cpu1
- mps2/an521/cputest
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The test implementation is based on a copy of the HFC multilink test.
The test verifies that the stack respects the reference counting of SDU
buffers when the L2CAP -EINPROGRESS feature is used.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This is shorthand for random static addresses. It's similar to
`bt_addr_le_from_str`, but is a macro that results in an object literal,
making it more versatile and less verbose.
This macro only gives access to the first 255 random static addresses,
but this ought to be enough addresses for testing.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The commit splits default FCB scenario into one with endmarker
enabled, the original one, and one with disabled.
This allows to test the FCB in cases when CONFIG_FCB_ALLOW_FIXED_ENDMARKER
is set and not set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit fixes minor copyright issues and corrects the compatible of
gpio-stepper with the vendor name as zephyr
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Clock source is changed from RC_SLOW to RC_FAST_D256 in order
to improve clock precision and avoid tests failing due to
lower precision of RC clock (around 10%).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This ensures that enabling BT_CTLR_DTM does not break the compilation of
the Bluetooth shell.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Removed the LE Audio specific definition and instead
refer to the value defined by iso.h as it is ISO/Core
that defines this size, and not BAP/Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There are issues with 64 bit compilation in hostap so disable
native_sim/native/64 board from the tests. The board will be
enabled again after updating the hostap from upstream and fixing
the issues.
Fixes#80437
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For tests that support both targeting unit_testing and
other targets, we check in the cmake code the BOARD variable.
Let's allow users to set this to either of unit_testing
or unit_testing/unit_testing so it behaves like for other
tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix filtering done in
22c3438f1b
Otherwise we end up with tests defined twice, as a .unit and .zerphyr
variant but both run in normal builds, and none for unit tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use full board name in cmake file.
Akin to the fix done in
https://github.com/zephyrproject-rtos/zephyr/pull/80270/
following the changes from
https://github.com/zephyrproject-rtos/zephyr/pull/77250/
Note after the Zephyr cmake code has been run the BOARD
variable is split into BOARD BOARD_QUALIFIERS,
where BOARD does not contain the qualifiers anymore
(see cmake/modules/boards.cmake for more info).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Removed the generation of broadcast id inside the stack. It is now up
to the application to generate this by itself. The CAP sample has
been modified to allow either a static broadcast, or a random one.
All of this is handled in the application.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The 12-bit signed values for the results of PBR are a bit
cumbersome, so this adds a helper function to make it easier to work
with the HCI formatted steps.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Add unit tests for bt_le_cs_step_data_parse.
Also exit early (without calling the function pointer) if the next
step would seem to read out of bounds.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Adds a test to ensure that the LoRaWAN MCUmgr transport builds with
all options enabled and all options disabled
Signed-off-by: Jamie McCrae <spam@helper3000.net>
The peer remote device "source_dev" can be retrieved from the
remote-endpoint-label. Direct reference via phandle is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Instead of fixing csi2rx clock frequencies, set them according to the
pixel rate got from the camera sensor.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The peer remote device "sensor_dev" can be retrieved from the
remote-endpoint-label. Direct reference via phandle is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
nrf54h20dk_nrf54h20_cpurad by default has less RAM dedicated for
DMA transfers and default 1k buffer cannot be used for
uart_async_long_buf case. Use custom value.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
One of the test case is performing long transfers using 1k buffers.
For some targets there may be not enough RAM to perform such
transfers. Make long buffer length configurable.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adjust the testcase.yaml files to only allow running on native_sim.
These tests use mocking and are not meant to run on embedded platforms.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Fix the test for sending frames with the CAN_FRAME_ESI flag set. Sending
frames with this flag set in software is never allowed.
Fixes: 8023a58c2a
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Linter pass makes CI happy and keeps code compliant
with the stylistic guidelines of the project
Signed-off-by: Rafael Laya <rafael_laya97@hotmail.com.com>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added test to verify deferred ACL Tx transmission setup,
such that GATT discovery completes with least latency and
GATT notifications can be received earliest after connection
establishment.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The CONFIG_DUMMY_DISPLAY is now enabled in conjunction with devicetree,
So, no need to be explicitly enabled.
Remove the setting.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Replace OVERLAY_CONFIG with CONF_FILE since no-device-pm.conf
contains an alternative configuration to the one in prj.conf
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Rework overlays and add sysbuild/vpr_launcher folder to allow standard
test configuration for nrf54h20dk cpuppr.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework existing nrf54h20dk overlays to allow adding of
nrf54h20dk//cpuppr target.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
