Log the address and the err/reason values in the connected
and disconnect callbacks.
Since these values are not part of the BTP events it is
difficult to follow the order and reason why disconnects
happen when debugging.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves rwlocks into a singular
testsuite at tests/posix/rwlocks app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves semaphore into a singular
testsuite at tests/posix/semaphores app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves confstr, sysconf and uname into
a singular testsuite at tests/posix/single_process app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Due to addition of busy threads running on other cores, and
the simulator runs in single thread bouncing through all cores,
we are wasting quite a bit of time just busy waiting. This makes
each simulator run too long for CI. So limit CPU number to 1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The sched benchmark is designed for systems with a single
CPU. Otherwise, the timestamps would be wrong when the partner
thread is scheduled on another CPU, i.e. negative values:
```
unpend 63 ready 62 switch -16562 pend 18937 tot 2500 (avg 928)
```
When the system allows for multiple CPUs, spawn a non-preemptible
thread to keep the other CPUs busy.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Adjust default number of test samples which is based on SRAM size.
Test is using 8*TIMER_TEST_SAMPLES and with previous defaults for
the device with 64k RAM it was using 56k of test data leaving only
8k RAM and that was easily not enough. Adjust conditions to
take less samples when SRAM_SIZE is equal to the threshold.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add conversion macros from milliseconds to various units.
The purpose of these macros is to make it more clear/easier
for users to set and read values using milliseconds rather
than the various BT units which may be in 0.625, 1.25 or 10ms
units.
This is especially useful when comparing related values using
different units, such as advertising interval (0.625ms units)
and periodic advertising interval units (1.25ms units).
Users will have to be aware that these macros can provide slightly
different values than what is provided, if the provided values
do not match the units.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test by providing an overlay for the nrf5340bsim
Both for the app and net core.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, in the nrf5340bsim
Note this test specs 2 GPIO pins to be shorted. This can be done
for the simulation target by calling zephyr.exe with the option
`-gpio_conf_file=shorts_config.txt`
Where that file would contain this one line (for the provided overlay),
for the cpunet:
---- shorts_config.txt
short 1.1 1.2
----
And this for the cpuapp:
---- shorts_config.txt
short 3.1 3.2
----
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, for the nrf5340bsim.
Both for the app and net core.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, in the nrf54l15bsim
Note this test specs 2 GPIO pins to be shorted. This can be done
for the simulation target by calling zephyr.exe with the option
`-gpio_conf_file=shorts_config.txt`
Where that file would contain this one line (for the provided overlay)
---- shorts_config.txt
short 1.1 1.2
----
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for realloc (and realloc_aligned) into the multi heap lib,
where the buffer sent in will either be reused (maybe shrinked),
or enlarged by allocating on any of the matching heaps of the multi heap.
Signed-off-by: Meir Komet <mskomet1@gmail.com>
If trying to parse a string like 192.0.2.2:80/foobar and
setting the length to 12 which means to parse the IP address
and port, the parsing failed because it used one extra character
from the string. This issue was not present if the input string
was terminated after the port number.
Add a test case to catch this problem.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The commit moves SHA calculation to separate test scenario, so that
it can be run separately from other flash map tests.
This reduces flash wear by not running basic flash map tests each
time different SHA backend is tested.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Remove needless writes/read and erase in flash_area_get_sectors test
scenario, by replacing it with comparison with layout directly obtained
from device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Use zexpect instead of zassert so that the failed tests do not
stop the test execution but we run all the tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPV6_JOIN/LEAVE_GROUP corresponds to IPV6_ADD/DROP_MEMBERSHIP
definitions so define the former and add tests for them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The in6addr_any is a global symbol that can be used when any
address (all zero bits) is being referenced.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Validate that the SBS fuel gauge driver returns the expected values for
negative currents (discharging).
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add a new API to cancel just one, or mathing requests,
instead of cancelling all ongoing requests.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
CoAP client should be able to push data through functioning socket
while another sockets is failing or reporting poll() errors.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add testcase where sending Ack to incomming Confirmable message fails.
This should be reported to application as now the server is unaware
that transmission have succeeded, so we cannot thread it as success.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
* Use sys_rand_get() and seed the CoAP library, so our MIDs are
random.
* Set socket events per socket, so we don't accidentally receive
on wrong socket
* Reply with correct tokens
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
